Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your HYHIOTS Wireless Remote Control Outlet. Please read this manual thoroughly before using the product to ensure safe and optimal performance. This device allows you to remotely control electrical appliances using RF 433MHz technology.
Package Contents
- 1x HYHIOTS Portable Transmitter (Remote Control) - Battery (CR2032) included
- 1x RF Plug Receiver (Outlet)
- 1x User Manual
Setup
The HYHIOTS Wireless Remote Control Outlet is designed for quick and easy installation without the need for complex wiring, tools, or Wi-Fi configuration. The transmitter and receiver are typically pre-paired from the factory.
- Plug in the Receiver: Insert the RF Plug Receiver into any standard EU wall socket.
- Connect Appliance: Plug your desired electrical appliance into the RF Plug Receiver.
- Test Remote Control: Press the button on the portable transmitter to turn the connected appliance ON or OFF.
If the remote control does not operate the receiver immediately, refer to the "Pairing Instructions" section below.
Adhesive Sticker Installation for Transmitter
The portable transmitter can be mounted on a wall or other flat surface using the provided adhesive sticker.
- Clean the desired installation surface to ensure it is dry and free of dust.
- Peel off the protective film from one side of the adhesive sticker.
- Attach the sticker to the back of the portable transmitter.
- Peel off the protective film from the other side of the adhesive sticker.
- Firmly press the transmitter onto the cleaned surface for a few seconds.
Operating Instructions
The HYHIOTS Wireless Remote Control Outlet allows you to control connected appliances from a distance of up to 100 meters in open areas, and effectively through walls and doors, thanks to its RF 433MHz technology.
Basic Operation
- Press the button on the portable transmitter once to turn the connected appliance ON.
- Press the button on the portable transmitter again to turn the connected appliance OFF.
Multiple Control Methods
The system supports two primary control methods:
- Direct Button on Receiver: The receiver unit itself has a power button for manual ON/OFF control.
- Portable Remote Control: Use the handheld transmitter for wireless control.
Programmable and Expandable
The system is designed to be flexible, allowing for various control configurations:
- One Switch Controls One Outlet: A single remote control can operate one receiver.
- Multiple Switches Control One Outlet: Several remote controls can be paired to operate a single receiver.
- One Switch Controls Multiple Outlets: A single remote control can be paired to operate multiple receivers simultaneously.
Pairing Instructions (If needed)
If your remote control and receiver are not paired, follow these steps:
- Plug the receiver into a wall socket.
- Press and hold the button on the receiver for approximately 3-5 seconds until the indicator light starts flashing.
- While the indicator light is flashing, press the button on the portable transmitter once.
- The indicator light on the receiver should stop flashing and remain solid, indicating successful pairing.
- Test the remote control to ensure it operates the receiver.
Maintenance
- Cleaning: Wipe the device with a soft, dry cloth. Do not use liquid cleaners or aerosols.
- Battery Replacement: The portable transmitter uses a CR2032 battery. When the remote control range decreases or it stops responding, replace the battery. To replace, open the back cover of the transmitter, remove the old battery, and insert a new CR2032 battery with the correct polarity.
- Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures when not in use for extended periods.
Troubleshooting
- Device not responding:
- Ensure the receiver is properly plugged into a live wall socket.
- Check if the appliance connected to the receiver is powered on and functioning correctly.
- Replace the battery in the portable transmitter.
- Re-pair the transmitter and receiver following the "Pairing Instructions" in the Operating section.
- Reduced remote control range:
- Replace the battery in the portable transmitter.
- Ensure there are no excessive obstructions (e.g., thick concrete walls, large metal objects) between the transmitter and receiver.
- Avoid placing the receiver near strong electromagnetic interference sources.
- Appliance turns ON/OFF unexpectedly:
- This is rare due to the RF 433MHz technology. Try re-pairing the devices to reset the connection.
Specifications
| Feature | Specification |
|---|---|
| Brand | HYHIOTS |
| Model Number | WHDZ01-RF |
| Frequency | 433.92 MHz |
| Receiver Power Supply | AC 100-250V |
| Transmitter Battery | 1x CR2032 (included) |
| Effective Range | Up to 100 meters (open area) |
| Operating Temperature | -20°C to 60°C |
| Max Power Load | 3500W |
| Current Rating | 16 A |
| Operating Voltage | 240 Volts |
| Receiver Dimensions (L x W x H) | 5 x 5 x 8.3 cm (approx.) |
| Transmitter Dimensions (L x W x H) | 5 x 5 x 1.5 cm (approx.) |
| Material | Plastic (ABS, ignifuge) |
| Certifications | CE, RoHS, FCC |
| Protection Rating | IP44 (humidity resistant) |
| Standby Power Consumption | 0.5W |
Safety Information
- Do not disassemble or modify the device.
- Ensure the total power consumption of connected appliances does not exceed 3500W.
- Keep the device away from water and high humidity, despite its IP44 rating, to prevent electrical hazards.
- Do not use the device with damaged cords or plugs.
- This product is not a toy. Keep out of reach of children.
- Dispose of batteries and electronic components responsibly according to local regulations.
Warranty and Support
For warranty information and customer support, please refer to the manufacturer's official website or contact your retailer. Keep your purchase receipt as proof of purchase.