Introduction
The Dormakaba IC800 BLE Digital Door Lock combines advanced technology with robust security. Featuring a high-strength anti-sawing lock body and a lifting handle anti-lock function, it ensures enhanced protection against tampering. This versatile lock supports multiple access methods, including card/RFID fob, PIN code, fingerprint, and mechanical key, providing flexible and convenient entry options. Its integrated BLE technology enables remote control and monitoring via a mobile app. Equipped with an alarm system, it alerts users to unauthorized attempts or security breaches. The sleek, durable design is ideal for modern homes and offices, ensuring both style and peace of mind.
Figure 1: Front view of the Dormakaba IC800 BLE Digital Door Lock, showcasing the keypad and handle.
Setup and Installation
This section provides general guidance for setting up your Dormakaba IC800 BLE Digital Door Lock. For detailed installation, please refer to the comprehensive installation guide included in your product packaging.
Package Contents
Before beginning installation, ensure all components are present:
- Dormakaba IC800 BLE Digital Door Lock unit
- RFID Card
- Manual Key (2 included)
- Mounting hardware and screws
- Installation template
- User Manual (this document)
Battery Installation
- Locate the battery compartment on the interior unit of the lock.
- Open the battery cover.
- Insert four (4) 1.5V AA Alkaline batteries, ensuring correct polarity.
- Close the battery cover securely. The lock will emit a voice prompt upon successful power-up.
Initial Programming
After installation and battery insertion, follow the on-screen prompts or voice guidance to set up the initial master PIN code and register your first fingerprint or RFID card. Refer to the detailed programming section in your installation guide for specific steps.
Operating Instructions
The Dormakaba IC800 BLE offers multiple convenient ways to access your property.
Access Modes
- Fingerprint Recognition: Place your registered finger on the fingerprint sensor. The lock will unlock upon successful verification.
- PIN Code Entry: Touch the keypad to activate it. Enter your registered 4-12 digit PIN code followed by the '#' key. The lock will unlock if the code is correct.
- RFID Card/Fob: Present your registered RFID card or fob to the card reader area on the lock. The lock will unlock upon successful verification.
- Mechanical Key: In case of emergency or battery depletion, insert the mechanical override key into the keyhole and turn to unlock.
- Mobile App (BLE): Use the dedicated Dormakaba mobile application to remotely unlock the door via Bluetooth Low Energy (BLE) when within range. Ensure your device is paired with the lock.
- Double Authentication: For enhanced security, the lock supports a combination of access methods, such as Card/Fingerprint + PIN code. Refer to the app or advanced settings for configuration.
Locking the Door
- Automatic Locking: The lock is configured to automatically lock after a set period once the door is closed.
- Manual Locking (Lifting Handle Anti-Lock): Lift the exterior handle upwards to engage the deadbolt for additional security. This function provides an extra layer of manual security.
Maintenance
Proper maintenance ensures the longevity and optimal performance of your digital door lock.
Battery Replacement
The lock will emit a low-battery alarm when the battery level is critical. Replace all four (4) AA Alkaline batteries promptly to avoid loss of functionality. Refer to the "Battery Installation" section for replacement steps.
Cleaning
Clean the lock's exterior surfaces, including the keypad and fingerprint sensor, with a soft, dry cloth. Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish and electronic components.
Emergency Power
If the batteries completely deplete before replacement, you can provide emergency power via a USB Type-C cable connected to an external power bank. Locate the USB Type-C port on the exterior unit, typically at the bottom.
Troubleshooting
This section addresses common issues you might encounter with your Dormakaba IC800 BLE Digital Door Lock.
| Problem | Possible Cause | Solution |
|---|---|---|
| Lock does not respond / No power | Depleted batteries | Replace batteries or use emergency USB Type-C power. |
| Fingerprint not recognized | Finger is wet/dirty; Fingerprint not registered; Sensor is dirty | Ensure finger is clean and dry. Re-register fingerprint if necessary. Clean the fingerprint sensor. |
| PIN code not working | Incorrect PIN entered; PIN not registered | Verify the PIN code. Re-register the PIN code if necessary. |
| RFID card not working | Card not registered; Card damaged | Ensure the RFID card is registered. Try another registered card. |
| Low-battery alarm sounds | Batteries are low | Replace all four (4) AA Alkaline batteries immediately. |
| Tamper/Break-in alarm sounds | Unauthorized attempt to open or damage the lock | Investigate the cause of the alarm. The alarm will typically reset after a period or upon successful authorized entry. |
Specifications
Below are the key technical specifications for the Dormakaba IC800 BLE Digital Door Lock.
Figure 2: Detailed specifications table for the Dormakaba IC800 BLE Digital Door Lock, including hardware, storage, and app features.
| Feature | Detail |
|---|---|
| Brand | dormakaba |
| Model Name | IC 800 BLE |
| Lock Type | Mortise Lock |
| Material | Metal (Mortise Full SS-304 anti-sawing lock body) |
| Color | Red Bronze |
| Dimensions (L x W x H) | 7.7 x 15 x 33.3 Centimeters |
| Item Weight | 4.9 Kilograms |
| Access Modes | App-enabled (BLE), Card/RFID Fob, PIN code, Fingerprint, Mechanical Key, Double Authentication |
| Fingerprint Capacity | Up to 100 |
| RFID Card Capacity | Up to 100 |
| PIN Code Capacity | Up to 50 (4–12 digits) |
| Mobile Device Capacity | Up to 10 via BLE |
| Power Source | 4 x 1.5V AA Alkaline batteries |
| Emergency Power | USB Type-C |
| Special Features | Alarm (tamper, break-in, low-battery), Fingerprint, Fob Unlock, Touchscreen, Voice Guidance, Lifting Handle Anti-Lock |
| Recommended Uses | Homes, Offices, Storage Units |
Figure 3: Side view of the Dormakaba IC800 BLE Digital Door Lock, illustrating the robust mortise lock mechanism.
Warranty Information
The Dormakaba IC800 BLE Digital Door Lock comes with a 1-year warranty from the date of purchase. This warranty covers manufacturing defects and ensures the product functions as intended under normal use. Please retain your proof of purchase for warranty claims. For specific terms and conditions, refer to the warranty card included with your product.
Customer Support
For technical assistance, troubleshooting, or warranty inquiries, please contact Dormakaba customer support.
- Manufacturer: Dormakaba India Private Limited
- Importer/Packer: Buildpro Technologies India Pvt.Ltd
- General Inquiries: enquiry.india@dormakaba.com
- Website: www.dormakaba.com/in-en
When contacting support, please have your product model (IC800 BLE) and purchase details readily available.