1. Important Safety Information
Please read all instructions carefully before using this electric wall heater. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Electrical Safety: This heater is equipped with an ALCI (Appliance Leakage Current Interrupter) safety plug. Do not bypass or tamper with this safety feature. If the ALCI trips, unplug the heater and inspect for damage before resetting.
- Placement: Ensure the heater is placed on a stable, level surface or securely mounted to a wall. Maintain a minimum distance of 3 feet (0.9 meters) from combustible materials such as furniture, curtains, bedding, paper, clothes, and other objects.
- Overheating Protection: The heater features an automatic overheat protection system. If the heater overheats, it will automatically shut off. Unplug the unit, allow it to cool for 30 minutes, and then plug it back in. If it continues to shut off, contact customer support.
- Tip-Over Protection: The heater is designed with a tip-over safety switch that automatically turns off the unit if it is accidentally knocked over.
- Waterproof Switch: The main power switch is designed to be waterproof for enhanced safety, particularly in environments like bathrooms.
- Children and Pets: Keep children and pets away from the heater. Do not leave the heater unattended when in use.
- Ventilation: Do not block air inlets or outlets. Ensure proper ventilation to prevent overheating.
- Power Cord: Do not run the power cord under carpeting or cover it with throw rugs, runners, or similar coverings. Arrange the cord away from traffic areas where it will not be tripped over.
2. Product Overview
The TRUSTECH IPH-01S is a 1500W electric wall heater designed for efficient indoor heating. It features a combination of quartz tube technology and a turbofan for rapid and even heat distribution. The unit can be used as a floor-standing heater with detachable feet or mounted on a wall. It includes an LED indicator screen, a remote control, and multiple safety features.
Image: The TRUSTECH IPH-01S electric wall heater, white in color, with its remote control. Visible heat waves emanate from the bottom vent, indicating its heating function.
3. Setup and Installation
3.1 Unpacking
Carefully remove the heater and all accessories from the packaging. Retain the packaging for future storage or transport. Verify that all components are present:
- Heater Unit
- Remote Control
- Detachable Feet (2 pcs)
- Wall Mounting Hardware (screws, anchors)
- User Manual
3.2 Floor Standing Installation
If using the heater as a portable unit, attach the two detachable feet to the bottom of the heater. Align the feet with the designated slots and secure them firmly. Ensure the heater is stable before plugging it in.
Image: The TRUSTECH IPH-01S heater shown with its detachable feet, illustrating its use as a floor-standing unit. The image also shows the heater mounted on a wall, highlighting its dual installation options.
Image: A close-up view of the detachable feet being attached to the base of the heater, demonstrating the simple installation process for floor use.
3.3 Wall Mounting Installation
For wall mounting, use the provided hardware. Choose a suitable location on a wall, ensuring it is away from flammable materials and has adequate clearance. Mark the drilling points, drill holes, insert anchors, and secure the heater to the wall using the screws. Refer to the included wall mounting guide for detailed steps.
Image: The TRUSTECH IPH-01S electric wall heater is shown mounted on a bathroom wall, emitting warm air. A person is relaxing in a bathtub, illustrating the heater's suitability for bathroom use.
3.4 Power Connection
Plug the ALCI safety plug into a standard 120V AC electrical outlet. Ensure the outlet is in good condition and not overloaded. Press the main power switch on the side of the heater to the 'ON' position.
Image: A close-up of the waterproof power switch on the side of the heater, with a finger pressing it, indicating the activation of the unit.
Video: This video demonstrates the setup and key features of the TRUSTECH Wall-mounted Heater with Base, including attaching the standing base, activating the waterproof power switch, and using the remote control to adjust settings.
4. Operating Instructions
The heater can be operated using the control panel on the unit or the included remote control.
Image: The LED indicator screen of the TRUSTECH IPH-01S heater is shown, displaying temperature and mode settings. A hand is pointing to the remote control, highlighting the ease of operation.
4.1 Power On/Off
- Ensure the main power switch on the side of the heater is in the 'ON' position.
- Press the ON/OFF button on the control panel or remote control to turn the heater on or off.
4.2 Heating Modes
Press the MODE button to cycle through the available heating modes:
- ECO Mode: Energy-saving mode, maintains a comfortable temperature with reduced power consumption.
- Low Heat Mode: Provides a lower heat output.
- High Heat Mode: Provides maximum heat output (1500W).
Image: An illustration showing the three heating modes: High Mode (sun icon), Low Mode (half-sun icon), and Energy-Saving Mode (tree icon), indicating customizable heating options.
4.3 Temperature Control
Use the Temperature Up (▲) and Temperature Down (▼) buttons on the control panel or remote control to adjust the desired temperature. The thermostat allows precise control within a range of 59℉ to 86℉ (15℃ to 30℃).
4.4 Timer Function
Press the TIMER button to set the automatic shut-off timer. The timer can be set for up to 12 hours. Each press of the button will increase the timer by one hour. The display will show the remaining time before shut-off.
Image: The TRUSTECH IPH-01S heater is shown in a bedroom setting with a visual representation of a 12-hour timer, indicating its programmable shut-off feature for convenience.
Image: A close-up of the heater's display showing the timer function activated, with a clock icon and a numerical value indicating the set duration.
4.5 Child Lock
The heater includes a child lock feature to prevent accidental changes to settings. To activate/deactivate the child lock, refer to the specific instructions in the full manual (usually by pressing and holding a combination of buttons for a few seconds).
Image: The heater's display screen with a prominent lock icon illuminated, indicating that the child lock feature is currently active.
5. Maintenance
Regular maintenance ensures optimal performance and longevity of your heater.
- Cleaning: Always unplug the heater and allow it to cool completely before cleaning. Use a soft, damp cloth to wipe the exterior surfaces. Do not use abrasive cleaners or solvents.
- Dust Removal: Periodically use a vacuum cleaner with a brush attachment to remove dust from the air intake and exhaust grilles.
- Storage: When not in use, store the heater in a cool, dry place, preferably in its original packaging.
- No User-Serviceable Parts: Do not attempt to open or repair the heater yourself. Refer all servicing to qualified service personnel.
6. Troubleshooting
If you encounter issues with your heater, refer to the following common problems and solutions:
- Heater does not turn on:
- Ensure the main power switch on the side is 'ON'.
- Check if the ALCI plug has tripped. Press the 'RESET' button on the plug.
- Verify the power cord is securely plugged into a working outlet.
- Check your household circuit breaker or fuse box.
- Heater turns off unexpectedly:
- The overheat protection may have activated. Unplug the heater, let it cool for 30 minutes, and restart. Ensure air inlets/outlets are not blocked.
- The tip-over switch may have activated. Ensure the heater is on a stable surface.
- Remote control is not working:
- Check and replace the batteries in the remote control.
- Ensure there are no obstructions between the remote and the heater's sensor.
- Insufficient heat output:
- Ensure the heater is set to 'High Heat Mode' if maximum warmth is desired.
- Verify the set temperature is higher than the ambient room temperature.
If the problem persists after trying these solutions, contact customer support.
7. Specifications
| Brand | TRUSTECH |
| Model Number | IPH-01S |
| Power | 1500W |
| Voltage | 120 Volts |
| Heating Coverage | Up to 160 sq. ft (primary), up to 500 sq. ft (supplemental) |
| Temperature Range | 59℉ - 86℉ (15℃ - 30℃) |
| Timer | 12-hour programmable |
| Heating Modes | ECO, Low, High |
| Mounting Type | Floor and Wall Mount |
| Safety Features | Overheat Protection, Tip-Over Protection, Waterproof Switch, ALCI Safety Plug |
| Product Dimensions | 6.6"D x 19.2"W x 22.8"H |
| Item Weight | 11.2 pounds |
8. Warranty and Support
For warranty information or technical support, please refer to the warranty card included with your product or visit the official TRUSTECH website. Keep your purchase receipt as proof of purchase.
