Important Safety Instructions
Please read all instructions carefully before using this heater and retain for future reference. Failure to follow these instructions may result in fire, electric shock, injury, or property damage.
- Electrical Safety: Ensure the heater is plugged into a 120V AC, 60Hz grounded outlet. Do not use with extension cords or power strips.
- Placement: Position the heater on a firm, level surface. Maintain a minimum distance of 3 feet (0.9 meters) from walls, furniture, curtains, and other combustible materials.
- Ventilation: Do not block air intakes or exhaust openings. Ensure proper airflow around the heater.
- Moisture: Do not use the heater in wet or damp locations, such as bathrooms or laundry areas. Avoid contact with water.
- Supervision: Do not leave the heater unattended while in operation. Keep children and pets away from the heater.
- Overheating Protection: The heater is equipped with an automatic shut-off feature if it overheats. If this occurs, unplug the heater, allow it to cool, and clear any obstructions before restarting.
- Tip-Over Protection: The heater will automatically shut off if it is accidentally tipped over by more than 45 degrees. Place the heater on a stable surface to prevent this.
- Cleaning: Always unplug the heater before cleaning. Use a soft, damp cloth; do not immerse in water.
- Repairs: Do not attempt to repair or disassemble the heater yourself. Contact qualified service personnel for repairs.
Package Contents
- TRUSTECH 36-inch Tower Space Heater (Model KPT-1606F)
- Remote Control (with 1 Lithium Metal battery included)
- User Manual
Product Diagram
Image: Front view of the TRUSTECH 36-inch Tower Space Heater, showing the heating element, 3D flame effect at the base, and the included remote control.
- Air Outlet Grille
- Control Panel (Top)
- Main Body
- 3D Flame Effect Window
- Base
- Power Cord
- Remote Control
Setup
- Unpacking: Carefully remove the heater and all accessories from the packaging. Retain packaging for storage if needed.
- Placement: Place the heater on a stable, level, and heat-resistant surface. Ensure it is at least 3 feet (0.9 meters) away from any walls, furniture, or flammable materials.
- Power Connection: Plug the power cord directly into a standard 120V AC, 60Hz grounded wall outlet. Do not use extension cords or adapters.
- Remote Control Battery: The remote control comes with a pre-installed Lithium Metal battery. If needed, remove the plastic tab to activate it or replace the battery according to the markings inside the battery compartment.
Operating Instructions
Control Panel
Image: Detailed view of the intuitive touch control panel located on the top of the heater, showing various function buttons and the digital display.
The control panel is located on the top of the heater. It features a digital display and touch-sensitive buttons for all functions.
- Power Button (Ⓢ): Turns the heater ON or OFF.
- Mode Button (MODE): Cycles through heating modes: Low (1000W), High (1500W), Energy-Saving (ECO), and Fan-only.
- Oscillation Button (OSC): Activates or deactivates the 60° oscillation function.
- Timer Button (TIMER): Sets the auto-off timer from 1 to 12 hours.
- Temperature Adjustment (+/-): Increases or decreases the target temperature (for ECO mode) or timer duration.
- Flame Button (FLAME): Turns the 3D flame effect ON or OFF.
Remote Control
Image: The compact remote control for the TRUSTECH heater, showing buttons for power, mode, oscillation, timer, temperature adjustment, and flame effect.
The remote control allows convenient operation of all heater functions from a distance. Ensure the remote is pointed towards the heater's control panel for optimal response.
- All buttons on the remote control correspond to the functions on the heater's touch control panel.
- The remote requires one Lithium Metal battery (included).
Operating Modes
- Low Heat (1000W): Provides a moderate heat output, suitable for maintaining warmth in smaller areas or for energy efficiency.
- High Heat (1500W): Delivers maximum heat output for rapid warming of larger rooms.
- Energy-Saving (ECO) Mode: In this mode, the heater intelligently adjusts its power consumption (between 1000W and 1500W) to maintain a set target temperature, optimizing energy use. Use the +/- buttons to set your desired temperature.
- Fan-Only Mode: Circulates air without heat, useful for general air movement.
Oscillation Function
Image: Overhead view illustrating the 60-degree oscillation feature of the TRUSTECH heater, distributing warmth across a wider area.
Press the "OSC" button on the control panel or remote to activate the 60° oscillation. This feature helps distribute warm air more evenly across a wider area of the room. Press "OSC" again to stop oscillation.
Timer Function
The timer allows you to set the heater to automatically turn off after a specified period. Press the "TIMER" button and use the +/- buttons to select a duration from 1 to 12 hours. The display will show the set time. Once the timer counts down, the heater will power off.
3D Flame Effect
The heater features a realistic 3D flame effect at its base, providing an ambient glow. Press the "FLAME" button to turn this effect ON or OFF independently of the heating function. It can also serve as a gentle nightlight.
Maintenance
Regular maintenance ensures optimal performance and longevity of your heater.
- Cleaning:
- Always unplug the heater and allow it to cool completely before cleaning.
- Use a soft, damp cloth to wipe the exterior surfaces. Do not use abrasive cleaners or solvents.
- Use a vacuum cleaner with a brush attachment to gently remove dust from the air intake and exhaust grilles.
- Do not immerse the heater in water or allow water to drip into the interior.
- Storage:
- If storing the heater for an extended period, clean it thoroughly.
- Store in a cool, dry place, preferably in its original packaging, away from direct sunlight and extreme temperatures.
Troubleshooting
Refer to the table below for common issues and their solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Heater does not turn on. |
|
|
| Heater produces no heat in heating modes. |
|
|
| Remote control not working. |
|
|
| Heater makes unusual noise. |
|
|
If the problem persists after trying these solutions, please contact customer support.
Specifications
| Feature | Detail |
|---|---|
| Brand | TRUSTECH |
| Model Number | KPT-1606F |
| Power Output | 1000W (Low), 1500W (High) |
| Voltage | 120V AC |
| Frequency | 60Hz |
| Heating Element | PTC Ceramic |
| Oscillation Angle | 60 degrees |
| Timer | 1-12 hours |
| Temperature Range | 59°F - 95°F (15°C - 35°C) |
| Product Dimensions | 7.4"D x 7.4"W x 34.6"H |
| Item Weight | 7.8 pounds |
| Safety Features | Tip-Over Protection, Overheat Protection, V0-grade flame-retardant materials, ETL Certified |
Warranty and Support
TRUSTECH provides a 12-month replacement warranty for this product from the date of purchase. Additionally, lifetime after-sales service and technical support are available.
For any questions, concerns, or technical assistance, please contact TRUSTECH customer support. Please have your model number (KPT-1606F) and purchase information ready.
Contact information can typically be found on the product packaging or the official TRUSTECH website.
