AWEI G10BL Wireless Open-Ear Bluetooth Headphones User Manual

Introduction

Thank you for choosing the AWEI G10BL Wireless Open-Ear Bluetooth Headphones. This manual provides essential information for the proper setup, operation, and maintenance of your device. Please read it thoroughly before use and retain it for future reference.

What's in the Box

• AWEI G10BL Wireless Stereo Bone Conduction Headphones
• USB Charging Cable (Type-C)
• User Manual
• Large and Small Earplugs

Image: The retail packaging for the AWEI G10BL headphones, showing the product and key features.

Safety Information

• Do not expose the headphones to extreme temperatures or humidity.
• Avoid dropping or subjecting the headphones to strong impacts.
• Do not attempt to disassemble or modify the headphones. This will void the warranty.
• Keep the headphones away from children and pets.
• Use only the provided or a certified Type-C charging cable.
• When using the headphones outdoors, remain aware of your surroundings, especially in traffic or hazardous areas, as the open-ear design allows ambient sound.
• Prolonged listening at high volumes may cause hearing damage.

Product Overview

The AWEI G10BL headphones feature an open-ear design for comfort and situational awareness. They are lightweight, weighing approximately 23.5g, and designed for sports and active use.

Image: A general view of the AWEI G10BL open-ear headphones, highlighting their flexible and lightweight design.

Key Components

• Ear Hooks: Designed to rest comfortably over your ears.
• Sound Transducers: Positioned near the ear canal to deliver audio while allowing ambient sound.
• Control Module: Integrated buttons for power, volume, and track control.
• Microphone: For hands-free calls.
• Type-C Charging Port: For recharging the internal battery.
• Magnetic Ear Shells: For secure storage when not in use.

Image: An exploded view illustrating the 4-core dynamic driver acoustic structure of the G10BL earphones, including components like the PE+PEEK composite diaphragm and 6mm dual dynamic driver.

Image: Depiction of the magnetic ear shells, showing how they can be joined together for secure storage and to prevent tangling.

Setup

1. Charging the Headphones

1. Locate the Type-C charging port on the control module.
2. Connect the provided USB Type-C charging cable to the port.
3. Connect the other end of the USB cable to a compatible USB power source (e.g., computer USB port, wall adapter).
4. The indicator light will show the charging status (e.g., red for charging, blue/off for fully charged).
5. A full charge provides approximately 13 hours of music/call time and up to 260 hours of standby time.

2. Bluetooth Pairing

1. Ensure the headphones are fully charged.
2. Press and hold the multi-function button (usually the center button on the control module) until the indicator light flashes red and blue alternately, indicating pairing mode.
3. On your device (smartphone, tablet, etc.), enable Bluetooth and search for available devices.
4. Select "AWEI G10BL" from the list of found devices.
5. Once connected, the indicator light will typically flash blue slowly or turn off, and you may hear a confirmation tone.
6. The headphones will automatically attempt to reconnect to the last paired device when powered on.

Operating Instructions

Image: Close-up view of the control module, showing the volume up/next track button, multi-function button, volume down/previous track button, microphone, and Type-C charging interface.

Power On/Off

• Power On: Press and hold the multi-function button for approximately 3 seconds until the indicator light flashes blue.
• Power Off: Press and hold the multi-function button for approximately 5 seconds until the indicator light flashes red and then turns off.

Music Playback

• Play/Pause: Short press the multi-function button.
• Next Song: Long press the "Volume +" button.
• Previous Song: Long press the "Volume -" button.

Call Management

• Answer/End Call: Short press the multi-function button.
• Reject Call: Long press the multi-function button.
• Redial Last Number: Double-press the multi-function button.

Volume Control

• Volume Up: Short press the "Volume +" button.
• Volume Down: Short press the "Volume -" button.

Maintenance

• Cleaning: Use a soft, dry cloth to wipe the headphones. Do not use abrasive cleaners or solvents.
• Storage: When not in use, store the headphones in a cool, dry place, away from direct sunlight and extreme temperatures. The magnetic ear shells can help keep them tidy.
• Water Resistance: The headphones are waterproof. However, avoid prolonged submersion in water and ensure the charging port is dry before charging.
• Battery Care: To prolong battery life, avoid fully discharging the headphones frequently. Charge them regularly, even if not in use for extended periods.

Troubleshooting

Specifications

Warranty and Support

For warranty information and customer support, please refer to the warranty card included with your product or visit the official AWEI website. Keep your purchase receipt as proof of purchase for warranty claims.

Manufacturer: AWEI