Introduction
Thank you for choosing the Combuh 12W 960LM Outdoor Wall Light with Motion Sensor. This manual provides essential information for the safe installation, operation, and maintenance of your new outdoor lighting fixture. Please read these instructions carefully before installation and retain them for future reference.
Safety Information
- Electrical Safety: Installation should be performed by a qualified electrician or a person with electrical knowledge to prevent electric shock. Always turn off the main power supply before installation, maintenance, or repair.
- Voltage: Ensure the power supply voltage matches the product's specified voltage (230 Volts).
- Mounting: Mount the fixture securely on a stable surface.
- Water Resistance: This product is IP65 rated for outdoor use, protecting against water jets and dust. However, avoid submerging the fixture in water.
- Temperature: Do not operate the fixture in temperatures outside its specified operating range.
Package Contents
Please check that all components are present and undamaged:
- Combuh 12W Outdoor Wall Light (1 unit)
- Mounting Plate (1 unit)
- Mounting Screws and Wall Plugs (Set)
- Instruction Manual (This document)
Image: Included components for installation.
Product Features
- Rotatable Lighting: Unique design with 340° double rotating heads allows flexible adjustment of the lighting angle for optimal precision and personalized illumination.
- Smart Motion Sensor: Automatically turns on the light at dusk when a person enters the detection zone, providing bright illumination and enhanced security.
- IP65 Waterproof: Constructed from durable aluminum alloy, this fixture is fully waterproof and effectively protects against water and rust, ensuring reliable performance even in severe weather conditions like heavy rain and snow.
- Durable Construction: Made from aerospace-grade aluminum, offering anti-rust and corrosion-resistant properties for long-lasting outdoor use.
- 4KV Surge Protection: Equipped with 4KV surge protection for enhanced durability and safety against electrical fluctuations.
Image: The 340° rotatable heads allow for flexible light direction.
Image: IP65 waterproof rating ensures protection against rain and snow.
Image: High-quality aluminum construction for durability and rust resistance.
Image: Internal components with 4KV surge protection.
Setup and Installation
The Combuh wall light is designed for easy installation. Follow these three steps:
- Fix the Mounting Plate: Securely attach the mounting plate to your desired wall location using the provided screws and wall plugs. Ensure the plate is level and firmly fixed.
- Connect the Wires: Connect the electrical wires from your power supply to the corresponding terminals on the fixture. Ensure all connections are secure and properly insulated. (Live, Neutral, Earth).
- Mount the Lamp: Align the lamp body with the mounting plate and secure it using the provided screws, typically hex screws on the sides of the fixture.
Important: Always ensure the main power supply is turned OFF before beginning any electrical work. If you are unsure about any step, consult a qualified electrician.
Image: Visual guide for the 3-step installation process.
Operating Instructions
Once installed and power is restored, the Combuh wall light operates automatically:
- Automatic Activation: The integrated motion sensor will detect movement within its range. The light will activate automatically when motion is detected in low light conditions (at dusk or night).
- Light Duration: The light will remain on for approximately 30 seconds after the last detected movement. If continuous motion is detected, the light will stay on.
- Adjusting Light Angle: The two light heads can be manually rotated up to 340° independently. Adjust them to direct light precisely where needed, whether for accent lighting or broader area illumination.
Image: The motion sensor activates the light automatically at night.
Image: Examples of the wall light in use on a courtyard fence, garden, and terrace.
Maintenance
To ensure optimal performance and longevity of your Combuh wall light, follow these maintenance guidelines:
- Cleaning: Periodically clean the fixture with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or electrical components.
- Inspection: Regularly inspect the fixture for any signs of damage, loose connections, or wear. If any issues are found, disconnect power and address them promptly.
- LEDs: The integrated LED bulbs are designed for long life and are not user-replaceable. If the LEDs fail, the entire fixture may need to be replaced.
- Sensor: Keep the motion sensor lens clean and free from obstructions (e.g., dirt, spiderwebs) to ensure proper detection.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power supply. Sensor not detecting motion. Ambient light too high. | Check circuit breaker and wiring connections. Ensure sensor is clear and motion is within range. The sensor only activates in low light conditions. Test at dusk or in darkness. |
| Light stays on continuously. | Continuous motion detected. Sensor malfunction. | Ensure no constant movement (e.g., tree branches, pets) is within the sensor's field of view. Contact customer support if the issue persists after checking for obstructions. |
| Light flickers or is dim. | Unstable power supply. Damaged wiring. Fixture malfunction. | Check power supply stability. Consult an electrician. Inspect wiring for damage (with power off). Contact customer support. |
| Motion sensor range is poor. | Sensor lens is dirty or obstructed. Incorrect mounting height/angle. | Clean the sensor lens. Remove any obstructions. Refer to installation guidelines for optimal mounting. |
Specifications
| Feature | Specification |
|---|---|
| Model Number | COM-9021 |
| Product Dimensions (L x W x H) | 19.2 x 6.5 x 8.1 cm (7.56 x 2.56 x 3.19 inches) |
| Weight | 800 grams |
| Material | Acrylic, Aluminum |
| Color | Black |
| Power Source | Corded Electric |
| Voltage | 230 Volts |
| Wattage | 12 Watts |
| Luminous Efficacy | 960 Lumens |
| Light Color | Warm White (3000 Kelvin) |
| Bulb Type | Integrated LED |
| Number of Bulbs | 2 |
| Switch Type | Motion Sensor (Infrared) |
| Waterproof Level | IP65 |
| Special Features | Anti-rust, Motion Sensor, Waterproof, 4KV Surge Protection |
| Installation Type | Semi-flush mount, Wall mount |
| Usage Area | Outdoor (Driveway, Balcony, Garage, Garden, House, Patio) |
| Country of Origin | China |
Image: Product dimensions for reference.
Warranty and Support
This Combuh product comes with a limited warranty. For specific warranty details, please refer to the documentation included with your purchase or contact the seller directly.
For technical support, troubleshooting assistance, or any questions regarding your product, please contact Combuh customer service through the retailer's platform or the contact information provided with your purchase.