Introduction
Thank you for choosing the DWVO Vanity Desk. This manual provides essential information for the safe assembly, operation, and maintenance of your new vanity desk. Please read all instructions carefully before beginning assembly and retain this manual for future reference.
This vanity desk features a high-definition mirror with 10 LED bulbs, offering three adjustable lighting modes and brightness levels. It also includes integrated power outlets (2 AC, 1 USB, 1 Type-C) for convenient charging of your devices and styling tools. Ample storage is provided through four drawers, multiple open shelves, and dedicated compartments.
Official product video showcasing the DWVO Vanity Desk with its mirror, power outlet, and LED lights, highlighting its features and design.
Safety Information
- Always unplug the vanity desk from the power outlet when not in use or before cleaning.
- Exercise caution with sharp edges and the overall weight of the unit during assembly and daily use.
- Ensure all electrical components remain dry and are kept away from heat sources to prevent damage or hazards.
- Do not exceed the specified weight limits for the tabletop, shelves, or drawers. Refer to the specifications section for details.
- Keep small parts and packaging materials away from children to prevent choking hazards.
Setup and Assembly
The DWVO Vanity Desk is designed for straightforward assembly. All necessary parts are clearly labeled, and detailed instructions are included in the packaging. Please follow the step-by-step guide provided with your product for optimal results.
Before You Begin:
- Clear a spacious area for assembly.
- Verify all components and hardware are present against the parts list.
- Have a Phillips head screwdriver and a hammer ready.
Assembly Tips:
- Do not overtighten screws during initial assembly; tighten fully once the unit is stable.
- Assemble on a soft, clean surface to prevent scratches.
- Seek assistance for lifting and positioning heavy sections.
Image illustrating the overall dimensions of the vanity desk, including the mirror, shelves, and drawer unit.
Image showing the vanity desk with its drawers and shelves open, demonstrating the storage compartments for cosmetics and accessories.
Operating Instructions
LED Mirror Lighting:
- Power On/Off: Locate the touch sensor on the mirror surface. Tap once to turn the lights on or off.
- Change Color Mode: With the lights on, tap the touch sensor repeatedly to cycle through the three color modes: Cold White (6000K), Warm White (4500K), and Warm Yellow (3000K).
- Adjust Brightness: With the lights on, press and hold the touch sensor. The brightness will gradually increase or decrease. Release the sensor when the desired brightness level is reached.
Visual guide to the three lighting modes and brightness adjustment feature of the LED mirror.
Integrated Power Outlet:
The vanity desk includes a built-in power strip with 2 standard AC outlets, 1 USB port (5V/2A), and 1 Type-C port (2.5V/2.1A). This allows for convenient charging and powering of your electronic devices and styling tools.
- Ensure the vanity desk is properly plugged into a wall outlet.
- Connect your devices to the appropriate AC, USB, or Type-C ports.
- The power strip is located near the hair dryer holder for easy access.
Detailed view of the power outlets, including AC, USB, and Type-C ports, with a hair dryer connected.
Maintenance
Cleaning:
- For general cleaning, wipe surfaces with a soft, damp cloth.
- Avoid using harsh chemicals, abrasive cleaners, or polishes that may damage the finish.
- For the mirror, use a glass cleaner and a lint-free cloth. Do not spray cleaner directly onto the mirror; apply to the cloth first.
Care:
- Periodically check all screws and fasteners to ensure they are tight. Retighten as necessary.
- Avoid placing hot items directly on the surface. Use coasters or protective pads.
- Keep the vanity desk away from direct sunlight and excessive moisture to prevent warping or discoloration.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| LED lights not turning on. | Power cord not fully plugged in; loose connection; faulty bulb. | Ensure the power cord is securely plugged into both the vanity and the wall outlet. Check for any loose wiring connections. If a bulb is faulty, contact customer support for replacement. |
| Power outlets not working. | Vanity not plugged in; circuit breaker tripped; device not compatible. | Verify the vanity desk is plugged into a live wall outlet. Check your home's circuit breaker. Ensure your device is compatible with the outlet's voltage/amperage. |
| Drawers are stiff or not sliding smoothly. | Improper assembly of drawer slides; obstruction in the tracks. | Review assembly instructions for drawer slide installation. Check tracks for any debris or objects. Apply a silicone-based lubricant to the slides if needed. |
| Vanity desk feels unstable. | Loose fasteners; uneven floor. | Tighten all assembly screws. Place the vanity on a level surface or use shims under the legs to stabilize it. |
If you encounter any issues not listed here or if the suggested solutions do not resolve the problem, please contact DWVO customer support for further assistance.
Specifications
| Feature | Detail |
|---|---|
| Model Number | MADWVbIUMD |
| Product Dimensions (W x D x H) | 39.5 inches x 16 inches x 54 inches |
| Item Weight | 75 pounds |
| Frame Material | Engineered Wood |
| Color | White |
| Lighting Type | 10 LED Bulbs |
| Lighting Modes | 3 Color Modes (6000K Cold White, 4500K Warm White, 3000K Warm Yellow) |
| Brightness Adjustment | Adjustable via touch sensor |
| Power Outlets | 2 AC Outlets (125V/12A), 1 USB Port (5V/2A), 1 Type-C Port (2.5V/2.1A) |
| Storage | 4 Drawers, 8 Open Storage Shelves |
| Assembly Required | Yes |
Warranty and Support
DWVO products are manufactured with quality and care. For information regarding warranty coverage, please refer to the warranty card included with your purchase or visit the official DWVO website.
If you require technical assistance, have questions about assembly, or need to report missing/damaged parts, please contact DWVO customer support. Contact details can typically be found on the product packaging, the included instruction leaflet, or the manufacturer's official website.
Please have your model number (MADWVbIUMD) and purchase date ready when contacting support.