1. Introduction
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Albott 12000 BTU Ductless Mini Split Air Conditioner and Heat Pump. Please read this manual thoroughly before using the unit and retain it for future reference.
The Albott Mini Split system offers an all-in-one solution for climate control, combining cooling, heating, dehumidifying, and fan modes. Designed for energy efficiency with a SEER2 18.5 rating and inverter technology, it provides reliable performance across a wide temperature range, from -4°F to 140°F, making it suitable for year-round comfort in spaces up to 750 sq. ft.
Image 1.1: Overview of Albott Mini Split AC features, including inverter technology, silent operation, and self-cleaning.
Image 1.2: Guide for selecting the appropriate BTU capacity based on room size.
2. Important Safety Instructions
Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, or injury.
- Electrical Safety: Ensure the unit is connected to a properly grounded 220V power supply. Do not operate with a damaged power cord or plug.
- Installation: Installation must be performed by qualified personnel in accordance with all local and national electrical codes. Improper installation can lead to electric shock, fire, or water leakage.
- Maintenance: Disconnect power before cleaning or performing any maintenance. Do not attempt to repair the unit yourself. Contact qualified service personnel.
- Operation: Do not insert fingers or objects into the air inlet/outlet. Keep children away from the unit. Do not spray water directly onto the unit.
- Refrigerant: The unit contains refrigerant. Only qualified personnel should handle refrigerant.
3. Product Components
The following items are typically included with your Albott Mini Split Air Conditioner and Heat Pump:
- Indoor Unit
- Outdoor Unit
- Remote Control
- Instruction Manual
- Batteries (for remote control)
- Hanging Plate (for indoor unit)
- Drain Pipe (for indoor unit)
- Installation Dimension Drawing
- 14.76 Ft Communication Wires
- Wall Sleeve
- Putty
- Copper Connection Pipe - Air Pipe
- Copper Connection Pipe - Liquid Pipe
- 8.2 Ft Power Cord
- Tape
Image 3.1: Contents of the Albott Mini Split AC package.
4. Setup and Installation
The Albott Mini Split system is designed for split-system installation. While some users may attempt DIY installation, professional installation by a certified HVAC technician is highly recommended to ensure proper function, safety, and warranty compliance. Incorrect installation can lead to operational issues, reduced efficiency, and potential hazards.
4.1 Key Installation Considerations:
- Location: Choose a location for both indoor and outdoor units that allows for optimal airflow, minimal noise disruption, and easy access for maintenance.
- Mounting: Securely mount the indoor unit using the provided hanging plate and ensure the outdoor unit is placed on a stable, level surface.
- Line Set Connection: Connect the copper refrigerant lines (air and liquid pipes) between the indoor and outdoor units. Ensure connections are tight to prevent leaks.
- Electrical Wiring: Connect the communication wires and power cord according to the wiring diagram in the detailed installation manual. This unit requires a 220V power supply.
- Vacuuming the Line Set: It is crucial to vacuum the refrigerant lines to remove air and moisture before releasing refrigerant. This step is critical for system efficiency and longevity.
- Drainage: Ensure the indoor unit's drain pipe is properly installed to allow condensate to flow freely, preventing water leakage.
Refer to the detailed installation dimension drawing and the included instruction manual for specific step-by-step guidance.
Image 4.1: Product dimensions and typical installation diagram.
5. Operating Instructions
Your Albott Mini Split system can be controlled using the included remote control. Ensure batteries are installed correctly.
5.1 Remote Control Functions
Image 5.1: Albott Mini Split AC remote control and its functions.
- Power Button: Turns the unit ON or OFF.
- Mode Button: Cycles through operating modes:
- Auto: Automatically selects cooling or heating based on room temperature.
- Cool: Provides cooling. Adjustable temperature range: 60°F–90°F.
- Heat: Provides heating. Adjustable temperature range: 60°F–90°F.
- Dry: Dehumidifies the air.
- Fan: Circulates air without cooling or heating.
- Temperature Adjustment: Use the UP/DOWN arrows to set the desired temperature.
- Fan Speed: Select from Low, Mid, High, or Turbo fan speeds.
- Sleep Mode: Optimizes temperature and fan speed for comfortable sleep and energy saving.
- Timer: Set a 24-hour timer for automatic ON/OFF operation.
- Swing: Adjust the horizontal and vertical airflow direction (4D Auto Swing).
- Self-Cleaning: Initiates the self-cleaning cycle (refer to Maintenance section).
5.2 Quiet Operation
The unit is designed for quiet operation, with noise levels as low as 29 dB, ensuring a peaceful environment for work, study, or sleep.
Image 5.2: Illustration of the unit's whisper-quiet operation.
Image 5.3: Sleeping mode for quiet nighttime operation.
6. Maintenance
Regular maintenance ensures optimal performance and longevity of your Albott Mini Split system.
6.1 Detachable Dust Filter
The indoor unit is equipped with a detachable dust filter for easy cleaning. Regular cleaning of the filter helps maintain air quality and unit efficiency.
- Removal: Gently open the front panel of the indoor unit and slide out the filters.
- Cleaning: Wash the filters with lukewarm water and a mild detergent. Rinse thoroughly and allow them to air dry completely before reinserting.
- Frequency: Clean filters every two weeks or more frequently depending on usage and air quality.
Image 6.1: Detachable dust filter for easy cleaning.
6.2 Self-Cleaning Function
The unit features a built-in 135°F high-temperature self-cleaning mode. This function helps to eliminate dust and bacteria from the internal components, maintaining cleanliness and efficiency.
- Activation: The unit prompts a cleaning cycle every 500 hours of operation. You can also activate it manually via the remote control.
- Cycle Duration: The self-cleaning cycle runs for approximately 30 minutes.
- Process: During the cycle, the unit heats its internal coils to 135°F to sterilize and then cools down to remove accumulated dirt and moisture.
Image 6.2: Self-cleaning technology for internal hygiene.
7. Troubleshooting
Before contacting customer support, review the following common issues and their potential solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not turn on | No power supply; Remote control batteries depleted; Circuit breaker tripped. | Check power connection; Replace remote batteries; Reset circuit breaker. |
| Insufficient cooling/heating | Dirty air filter; Temperature setting incorrect; Obstruction of air inlet/outlet; Room size exceeds capacity; Refrigerant leak. | Clean air filter; Adjust temperature setting; Remove obstructions; Ensure unit matches room size; Contact service for refrigerant check. |
| Unusual noise | Loose parts; Unit not level; Fan obstruction. | Check for loose components; Ensure unit is level; Remove any fan obstructions. |
| Water leakage from indoor unit | Clogged drain pipe; Improper installation. | Clear drain pipe; Contact installer to check installation. |
| Remote control not working | Batteries depleted or incorrectly inserted; Obstruction between remote and unit. | Replace batteries; Ensure clear line of sight to indoor unit. |
8. Specifications
Detailed technical specifications for the Albott 12000 BTU Ductless Mini Split Air Conditioner and Heat Pump (Model SAC017):
| Feature | Specification |
|---|---|
| Brand | Albott |
| Model Number | SAC017 |
| Cooling Power | 12000 British Thermal Units (BTU) |
| Heating Capacity | 12000 British Thermal Units (BTU) / 1 Ton Heat Pump |
| Seasonal Energy Efficiency Ratio (SEER2) | 18.5 |
| Voltage | 220 Volts |
| Frequency | 60Hz |
| Noise Level | 29 dB |
| Coverage Area | Up to 750 Square Feet |
| Indoor Unit Dimensions (L x W x H) | 30 x 11.61 x 7.9 inches |
| Outdoor Unit Dimensions (L x W x H) | 27.76 x 11.02 x 20.87 inches (approximate, based on image) |
| Item Weight | 24 pounds (indoor unit, approximate) |
| Special Features | Auto Clean, Dust Filter, Heating & Cooling Function, Inverter Compressor |
| Installation Type | Split System |
Image 8.1: Durable gold-plated fin and wide operating temperature range.
9. Warranty and Support
Albott products are designed for reliability and performance. For specific warranty details, please refer to the warranty card included with your product or contact Albott customer service. Keep your purchase receipt as proof of purchase for warranty claims.
9.1 Customer Support
If you encounter any issues or have questions regarding your Albott Mini Split Air Conditioner and Heat Pump, please contact our customer support team:
- Email: support@albott-us.com
- Online: Visit the official Albott website for FAQs and additional support resources.
When contacting support, please have your model number (SAC017) and purchase date available.