FINOTI S-X1 MAX Drone User Manual

1. Introduction

This manual provides essential information for the safe operation, setup, and maintenance of your FINOTI S-X1 MAX Drone. Please read this manual thoroughly before operating the drone to ensure proper function and to avoid damage or injury. The S-X1 MAX is an advanced quadcopter featuring an 8K HD camera, 3-axis anti-shake gimbal, 5G GPS, and a remote control with a 4.5-inch LCD screen for real-time FPV.

Image 1.1: The FINOTI S-X1 MAX Drone and its remote control unit, ready for flight in a grassy field.

2. Package Contents

Verify that all items listed below are present in your package. If any items are missing or damaged, please contact customer support.

• FINOTI S-X1 MAX Drone x 1
• Remote Control with 4.5-inch LCD Screen x 1
• Intelligent Flight Battery x 1 (Triple Battery versions include 3 batteries)
• Spare Fan Blades x 8
• USB Charging Cables x 5
• Screwdriver x 1
• User Manual x 1
• Card Reader x 1
• Memory Card x 1

3. Setup

3.1. Battery Charging and Installation

The intelligent flight battery and remote control battery (if applicable) must be fully charged before first use. Use the provided USB charging cables.

1. Drone Battery: Insert the intelligent flight battery into the drone until it clicks securely into place. To charge, connect the battery to a USB power source using the provided USB cable. The indicator lights will show charging status.
2. Remote Control Battery: The remote control has an internal rechargeable battery. Connect the remote control to a USB power source using a USB cable.

3.2. Propeller Installation

Ensure propellers are installed correctly according to their rotation direction. Each propeller is marked (A or B) and corresponds to specific motor arms.

1. Match the propeller type (A or B) with the corresponding motor arm.
2. Place the propeller onto the motor shaft and secure it firmly.

3.3. Gimbal Protection Removal

Before flight, carefully remove the gimbal protector. Failure to do so may damage the gimbal during operation.

Image 3.1: Close-up view of the drone's 3-axis gimbal, highlighting GPS return and optical flow hover capabilities.

4. Operating Instructions

4.1. Pre-Flight Checklist

• Ensure drone and remote control batteries are fully charged.
• Propellers are correctly installed and secure.
• Gimbal protector is removed.
• Fly in an open area, away from obstacles, people, and restricted airspace.
• Check weather conditions; avoid flying in strong winds or rain.

4.2. Powering On/Off

1. Power On: Press and hold the power button on the drone until indicator lights illuminate. Then, press and hold the power button on the remote control.
2. Power Off: Press and hold the power button on both the drone and remote control until they power down.

4.3. Remote Control Guide

The remote control features a 4.5-inch LCD screen for real-time FPV and various control buttons and joysticks.

Image 4.1: Detailed diagram of the remote control, indicating the function of each button, joystick, and screen area.

• Left Joystick (Throttle/Yaw): Controls altitude (up/down) and rotation (left/right).
• Right Joystick (Direction): Controls forward, backward, left, and right movement.
• Power Switch: Turns the remote control on/off.
• GPS Switch: Activates/deactivates GPS mode.
• One-Click Return: Initiates automatic return to home.
• Speed Adjustment: Toggles between different flight speeds.
• Lens Adjustment: Controls the camera's vertical angle.
• Headless Mode: Simplifies flight orientation.
• Gyroscope Calibration: Calibrates the drone's gyroscope.
• Geomagnetic Calibration: Calibrates the drone's compass.
• Take Pictures: Captures a still image.
• Picture Recording: Starts/stops video recording.
• Unlock: Unlocks the motors for flight.

4.4. Takeoff and Landing

1. Automatic Takeoff: After calibration and GPS lock (if in GPS mode), press the one-key takeoff button or push both joysticks to the bottom-outer corners to unlock motors, then push the left joystick up.
2. Automatic Landing: Press the one-key landing button. The drone will descend and land automatically.
3. Manual Landing: Slowly pull the left joystick down to descend. Once on the ground, hold the left joystick down for a few seconds to stop the motors.

4.5. GPS Functions

The S-X1 MAX features advanced GPS capabilities for enhanced flight stability and intelligent functions.

• GPS Positioning: Provides precise hovering and stable flight. Ensure a strong GPS signal before takeoff.
• GPS Return (Return-to-Home): The drone will automatically return to its takeoff point under conditions such as low battery, loss of signal, or manual activation.
• GPS Follow Me: The drone will automatically follow the remote control's GPS signal.
• Image Tracking: Identify a subject on the screen, and the drone will automatically track its movement.

Image 4.2: Visual representation of the drone's GPS capabilities, including low power return, over distance return, out of control return, and one-click return.

4.6. Camera Operation and Gimbal

The drone is equipped with an 8K HD dual-camera system and a 3-axis mechanical gimbal with EIS anti-shake for stable and clear aerial photography.

Image 4.3: Detailed view of the drone's HD camera and 3-axis self-stabilizing gimbal, showing adjustable angles for roll, heading, and pitch.

• Front Camera: Wide-angle 1080P HD lens with EIS.
• Bottom Camera: Optical flow positioning lens.
• Photo/Video: Use the dedicated buttons on the remote control to capture photos or start/stop video recording.
• Gimbal Control: Adjust the camera's pitch angle using the lens adjustment button on the remote control.

5. Maintenance

5.1. Cleaning

• Use a soft, dry cloth to clean the drone body and remote control.
• Gently clean camera lenses with a microfiber cloth designed for optics.
• Avoid using solvents or harsh chemicals.

5.2. Storage

• Store the drone and remote control in a cool, dry place, away from direct sunlight.
• Remove batteries if storing for extended periods.
• Fold the drone arms for compact storage.

5.3. Battery Care

• Do not overcharge or over-discharge batteries.
• Charge batteries at least once every three months to maintain health.
• Avoid exposing batteries to extreme temperatures.

6. Troubleshooting

7. Specifications

• Brand: FINOTI
• Model: S-X1 MAX
• Camera: 8K HD Dual Camera (Front 1080P Wide-angle with EIS, Bottom Optical Flow)
• Gimbal: 3-Axis Mechanical Stabilization + EIS Anti-Shake
• Motor Type: Brushless
• Image Transmission: 5G Digital Image Transmission (up to 5KM range)
• Remote Control: 4.5-inch LCD Color Screen for Real-time FPV
• GPS: Yes, with Intelligent Tracking, GPS Follow Me, Return-to-Home functions
• Battery: 7.4V 1600mAh Intelligent Battery
• Folded Dimensions: Approximately 8.2 x 14.8 x 6.4 cm
• Color: Black

8. Safety Guidelines

Adhere to the following safety guidelines to ensure a safe and enjoyable flight experience:

• Always fly in open areas, away from buildings, trees, power lines, and crowds.
• Maintain a safe distance from people and animals.
• Do not fly in adverse weather conditions (strong winds, rain, snow).
• Respect local regulations and airspace restrictions.
• Keep the drone within your line of sight.
• Perform pre-flight checks before every flight.
• Do not operate the drone under the influence of alcohol or drugs.
• Children should only operate the drone under adult supervision.

9. Warranty and Support

FINOTI products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the warranty card included in your package or contact FINOTI customer service through the retailer where the product was purchased. Please have your model number (S-X1 MAX) and purchase date available when contacting support.