Ausom L1 Foldable Electric Scooter User Manual

Introduction

This manual provides essential instructions for the safe operation, assembly, maintenance, and troubleshooting of your Ausom L1 Foldable Electric Scooter. Please read this manual thoroughly before first use to ensure proper function and safety.

Safety Information

Operating an electric scooter carries inherent risks. Always prioritize safety. Adhere to local laws and regulations regarding electric scooter use.

• Always wear a helmet and appropriate protective gear (knee pads, elbow pads).
• Do not ride under the influence of alcohol or drugs.
• Ensure all components are securely fastened before each ride.
• Maintain a safe speed and distance from other vehicles and pedestrians.
• Avoid riding in heavy rain, snow, or icy conditions.
• Familiarize yourself with the braking system and practice emergency stops.
• The maximum load capacity is 130 kg (287 lbs). Do not exceed this limit.
• Recommended rider height is 150-200 cm (4'11"-6'7").
• Regularly check tire pressure and brake function.

Package Contents

Upon unpacking, verify that all items are present:

• Ausom L1 Electric Scooter
• Battery (pre-installed or separate, based on packaging)
• Charger
• User Manual (this document)
• Tools for assembly (if required)

Setup and Assembly

The Ausom L1 scooter is designed for easy setup. Follow these steps to prepare your scooter for its first ride.

1. Unfolding the Scooter

Carefully remove the scooter from its packaging. Locate the folding mechanism on the stem. Release the latch and lift the handlebar stem until it locks into the upright position. Ensure the locking mechanism is fully engaged and secure.

Image Description: A graphic illustrating the three-step folding process of the Ausom L1 electric scooter. Step 1 shows releasing a latch, Step 2 shows folding the stem down, and Step 3 shows securing the folded stem. This demonstrates how to prepare the scooter for transport or storage.

2. Handlebar Adjustment

Adjust the handlebar height to a comfortable position. The Ausom L1 features an adjustable handlebar to accommodate riders between 150 cm and 200 cm (4'11" - 6'7"). Loosen the quick-release clamp, adjust the stem to the desired height, and securely tighten the clamp.

Image Description: A diagram showing the dimensions of the Ausom L1 electric scooter, including its adjustable handlebar height (1180-1300mm or 46.5-54.3 inches) and overall length (1240mm or 49 inches). It also indicates the recommended rider height and maximum load capacity.

3. Initial Charge

Before first use, fully charge the scooter's battery. Connect the charger to the charging port and then to a power outlet. The charging indicator light will change when fully charged. Refer to the 'Battery Charging' section for more details.

Operating Instructions

1. Powering On/Off

Press and hold the power button on the display to turn the scooter on or off.

2. Display Overview

The 4.5-inch LCD display provides real-time information:

• Speed: Current riding speed.
• Battery Level: Indicates remaining battery charge.
• Riding Mode: Shows selected power mode (e.g., PARK, ECO, SPORT, RACE).
• Odometer/Trip: Displays total distance or current trip distance.

Image Description: A close-up of the scooter's 4.5-inch LCD display, showing speed, battery level, and riding modes. An adjacent image of a smartphone with an NFC icon suggests integrated NFC for secure access or locking.

3. Riding Modes

Select the appropriate riding mode based on your environment and desired performance. Refer to the display for mode selection.

4. Acceleration and Braking

Use the reactive accelerator to control speed. The scooter is equipped with front and rear mechanical disc brakes, enhanced by E-ABS, for controlled stopping. Apply brakes gently and evenly.

Image Description: A close-up of the reactive accelerator lever, part of the scooter's controls, designed for responsive speed management.

Image Description: A person riding the Ausom L1 electric scooter, demonstrating the braking action. An inset image highlights the mechanical disc brake system on the wheel, emphasizing its immediate and secure stopping capability.

5. Lighting and Indicators

The scooter is equipped with a comprehensive LED lighting system for visibility:

• Powerful front headlight
• Rear taillight
• Brake light
• Turn indicators (controlled by a lever switch)

Image Description: The Ausom L1 electric scooter is shown at night with its front headlight brightly illuminating the path and its rear lights visible, demonstrating its full LED lighting system for enhanced visibility and safety.

Image Description: A close-up of the lever switch for turn indicators, located on the handlebar, allowing the rider to signal turns.

6. NFC and Password Lock

The scooter features integrated NFC and a password lock for enhanced security and convenience. Refer to the display instructions for setting up and using these features.

Battery Charging

The Ausom L1 is equipped with a 48V 15.6Ah EVE lithium battery. For optimal battery life and safety:

• Use only the provided charger.
• Charge in a dry, well-ventilated area, away from flammable materials.
• Do not overcharge the battery. Disconnect the charger once charging is complete.
• Avoid completely draining the battery before recharging.
• If storing the scooter for an extended period, charge the battery to approximately 50-70% and recharge every 1-2 months.

Image Description: A person riding the Ausom L1 electric scooter, with a graphic overlay emphasizing the 15.6 Ah EVE battery and its capability to provide up to 70 km (44 miles) of range on a single charge. A note clarifies that maximum range is achieved under specific conditions (full charge, 65 kg load, 20°C, 15 km/h on flat roads, no strong wind or braking).

Maintenance

Regular maintenance ensures the longevity and safe operation of your scooter.

• Cleaning: Wipe the scooter with a damp cloth. Do not use high-pressure water or immerse the scooter in water.
• Tires: Check the 10-inch tubeless tires regularly for wear and proper inflation. Maintain recommended tire pressure for optimal performance and safety.
• Brakes: Inspect brake levers, cables, and disc pads for wear. Adjust or replace as necessary.
• Fasteners: Periodically check all screws and bolts to ensure they are tight.
• Storage: Store the scooter in a cool, dry place, away from direct sunlight and extreme temperatures.

Image Description: A close-up of the 10-inch tubeless tires of the Ausom L1 electric scooter, positioned on a rocky, uneven surface. This highlights their deep tread and puncture-resistant design, suitable for various terrains like mud, snow, and gravel.

Image Description: A person riding the Ausom L1 electric scooter over a speed bump, demonstrating the effectiveness of its advanced fork suspensions. An inset image provides a detailed view of the blue spring suspension mechanism, illustrating how it absorbs shocks for a stable and comfortable ride.

Troubleshooting

This section addresses common issues you might encounter with your Ausom L1 scooter.

Scooter Does Not Power On

• Check if the battery is charged.
• Ensure all connections are secure.
• If the issue persists, contact customer support.

Reduced Range or Power

• Verify battery is fully charged.
• Check tire pressure; underinflated tires can reduce efficiency.
• Riding conditions (hills, heavy load, cold weather) can affect range.

Brakes Not Responsive

• Inspect brake cables for looseness or damage.
• Check brake pads for wear.
• Adjust brake tension as needed. If unsure, seek professional assistance.

Specifications

Warranty and Support

For warranty information and customer support, please refer to the documentation provided with your purchase or visit the official Ausom website. Keep your proof of purchase for warranty claims.

Ausom Official Store: Visit Ausom Store on Amazon