MERITLINE Twin Over Twin Bunk Bed with Trundle

Download PDF
Contents

MERITLINE Wood Bunk Bed with Trundle (Twin Over Twin, Natural) - Instruction Manual

1. Safety Information

Please read and understand all instructions before assembling and using this bunk bed. Failure to follow these instructions may result in serious injury.

  • Weight Capacity: Do not exceed the maximum weight capacity. The upper bunk is designed for a maximum weight of 250 lbs. The lower bunk is designed for a maximum weight of 400 lbs. The trundle bed is designed for a maximum weight of 200 lbs.
  • Guardrails: The upper bunk is equipped with guardrails on all four sides. Ensure they are always securely in place to prevent falls.
  • Ladder Safety: Always use the provided ladder for access to the upper bunk. Ensure the ladder is securely attached before use. Do not allow children to play on or around the ladder unsupervised.
  • Mattress Thickness: Use only mattresses that comply with the recommended thickness of 6 inches for all beds to ensure proper guardrail height and safe use.
  • Assembly: Adult assembly is required. Ensure all parts are present and all fasteners are tightened securely before use. Periodically check and re-tighten fasteners.
  • Ventilation: Ensure adequate ventilation around the bed.
  • No Horseplay: Prohibit horseplay on or under the bed.
  • Age Restriction: The upper bunk is not suitable for children under 6 years of age.

2. Setup and Assembly

This MERITLINE bunk bed requires assembly. Please follow the detailed assembly instructions provided in the packaging. Ensure you have all necessary tools and components before beginning.

2.1 Unpacking and Part Identification

  • Carefully unpack all components and lay them out on a clean, soft surface to prevent scratches.
  • Refer to the parts list in your assembly guide to identify each component. Contact customer support immediately if any parts are missing or damaged.

2.2 Assembly Steps

Follow the step-by-step diagrams and instructions included with your product packaging. Typically, assembly involves:

  1. Assembling the bed frames for both the upper and lower bunks.
  2. Attaching the guardrails to the upper bunk.
  3. Securing the ladder.
  4. Assembling and inserting the trundle unit.
  5. Placing the slats for mattress support.

Note: This bunk bed is designed to be detachable and can be converted into two separate twin-size beds. Refer to your assembly guide for specific instructions on this conversion.

Assembled MERITLINE Wood Bunk Bed with Trundle in Natural finish

Figure 1: Fully assembled MERITLINE Wood Bunk Bed with Trundle, showcasing the natural wood finish and integrated ladder.

MERITLINE Wood Bunk Bed separated into two individual twin beds with trundle

Figure 2: The bunk bed disassembled into two separate twin beds, with the trundle unit positioned next to one of the beds.

3. Operating Instructions

3.1 Using the Trundle Bed

The trundle bed is designed for convenient extra sleeping space. To use:

  1. Gently pull the trundle unit out from under the lower bunk. It is equipped with wheels for easy movement.
  2. Ensure the trundle is fully extended and stable before use.
  3. To store, push the trundle unit back under the lower bunk until it is fully recessed.
MERITLINE Wood Bunk Bed with trundle extended

Figure 3: The trundle bed fully extended from beneath the lower bunk, ready for use.

3.2 Converting to Two Twin Beds

This bunk bed can be separated into two independent twin beds. Refer to your original assembly manual for detailed instructions on how to safely detach the upper bunk from the lower bunk. This process typically involves:

  1. Removing the ladder and guardrails.
  2. Disassembling the connecting pins or bolts that join the upper and lower bunk frames.
  3. Adding any necessary end caps or support legs to convert the upper bunk into a standalone bed.

Always ensure all components are securely fastened when reconfiguring the bed.

4. Maintenance

Regular maintenance will help prolong the life and safety of your MERITLINE bunk bed.

  • Cleaning: Wipe surfaces with a soft, damp cloth. Avoid using harsh chemicals, abrasive cleaners, or polishes that may damage the wood finish.
  • Fasteners: Periodically check all bolts, screws, and other fasteners to ensure they are tight. Re-tighten as necessary to maintain structural integrity.
  • Wood Care: Protect the wood from direct sunlight and extreme temperature changes to prevent warping or cracking.
  • Moving the Bed: When moving the bed, lift it rather than dragging it to prevent damage to the frame and floor.

5. Troubleshooting

If you encounter any issues with your bunk bed, refer to the following common solutions:

  • Squeaking Noises: Squeaking often indicates loose fasteners. Check and re-tighten all bolts and screws. Ensure the bed is on a level surface.
  • Instability/Wobbling: Verify that all connections are secure and tightened. Ensure the bed is placed on a flat, even floor.
  • Trundle Not Sliding Smoothly: Check for any obstructions under the trundle. Ensure the wheels are clean and free of debris.
  • Missing Parts: If you discover missing parts during assembly, do not proceed. Contact MERITLINE customer support for assistance.

6. Specifications

FeatureDetail
Product TypeBunk Bed with Trundle
SizeTwin over Twin
ColorNatural
MaterialRubber wood + Plywood + MDF
Overall Product Dimension77.3’’(L) x 43.5’’(W) x 61.3’’(H)
Upper Bunk Weight Capacity250 lbs
Lower Bunk Weight Capacity400 lbs
Trundle Weight Capacity200 lbs
Recommended Mattress Thickness6 inches
Number of Slats (Upper/Lower/Trundle)13 / 13 / 7
Box Spring RequiredNo
Assembly RequiredYes
Special FeatureDetachable Bunk Bed
UPC199193810661
Detailed dimensions diagram for MERITLINE Wood Bunk Bed with Trundle

Figure 4: Dimensional drawing of the bunk bed and trundle unit, showing length, width, and height measurements.

7. Warranty and Support

For specific warranty information regarding your MERITLINE Wood Bunk Bed, please refer to the documentation included with your purchase or contact the seller directly. Warranty terms and conditions may vary.

If you require further assistance, have questions about assembly, or need to report missing/damaged parts, please contact MERITLINE customer support. You can often find contact information on the packaging, the seller's website, or through the platform where the product was purchased.

You can also visit the official MERITLINE store for more information: MERITLINE Store on Amazon

© 2025 MERITLINE. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.