iGarden K Pro 120 Robotic Pool Cleaner Instruction Manual

1. Introduction

Welcome to the iGarden K Pro 120 Robotic Pool Cleaner user manual. This document provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new robotic pool cleaner. Please read this manual thoroughly before initial use and retain it for future reference.

2. Safety Information

Always adhere to the following safety guidelines to prevent injury or damage to the product and your pool.

• Read all instructions carefully before operating the device.
• Do not operate the pool cleaner when people or animals are in the pool.
• Ensure the pool pump and any other pool equipment are turned off during the cleaner's operation to prevent interference.
• Charge the device indoors, away from direct sunlight and moisture, using only the supplied charger.
• Keep the device out of reach of children and pets.
• Do not use the device if the power cable or plug is damaged.

3. Product Overview

The iGarden K Pro 120 is a cordless robotic pool cleaner designed for inground pools, offering advanced features for efficient cleaning.

Figure 1: The iGarden K Pro 120 Robotic Pool Cleaner, a cordless unit with a sleek red and black design, ready for use.

Key Features:

• 12H Runtime: Up to 12 hours for floor-only cleaning or 7 hours for full pool cleaning (floor, walls, waterline).
• 200% Turbo Suction: Powered by a turbine-grade impeller and triple-motor system for deep cleaning.
• Smart Navigation: 3D “S”-shaped path planning for optimal coverage and efficiency.
• Touchscreen & App Control: Full-screen touchscreen for direct control and 2.4GHz Wi-Fi/Bluetooth app connectivity.
• Ultra-Fine Filtration: 4L top-load basket with 180µm mesh for trapping fine debris.
• Auto-Parking: Automatically parks along the pool wall when the battery is low for easy retrieval.
• Adaptive Mobility: Conquers steps, slopes, and walls effortlessly.

4. Setup

4.1 Charging the Device

Before first use, fully charge your iGarden K Pro 120. The charging time is approximately 8.99 hours.

Figure 2: The iGarden K Pro 120 Robotic Pool Cleaner connected to its charging cable, indicating the charging process.

1. Locate the charging port on the device.
2. Remove the silicone port cover.
3. Insert the charger plug firmly into the port.
4. Plug the adapter into a power outlet. The status lights on the touchscreen will pulse in sequence.
5. Charging is complete when all three status lights remain solid green.
6. Once charged, disconnect the charger and securely replace the silicone port cover to maintain waterproofing.

4.2 Initial Placement in the Pool

After configuring your desired settings, place the machine in the pool within three minutes of activation.

• Ensure the pool is clear of people and large obstacles.
• Turn off the pool pump and any other equipment to prevent interference with cleaning.
• Gently submerge the cleaner into the water. It will automatically dive and begin scanning the pool.

5. Operating Instructions

5.1 Control Methods

The iGarden K Pro 120 offers flexible control options:

• Touchscreen: Use the full-screen touchscreen directly on the robot to select cleaning modes, AI timers, and cycles.


Figure 3: A detailed view of the iGarden K Pro 120's full-screen touchscreen, showing various cleaning modes and settings.

• App Control: Connect via 2.4GHz Wi-Fi and Bluetooth using the iGarden Robotics app. Configure settings before placing the robot in the water.

Figure 4: A smartphone screen showing the iGarden Robotics app interface, used for controlling the K Pro 120 pool cleaner, with options for cleaning modes, timers, and cycles.

5.2 Cleaning Modes

The K Pro 120 offers four intelligent cleaning modes:

Figure 5: An illustration depicting the four distinct cleaning modes available: Full Coverage, Wall & Waterline Only, Floor Only, and Wall & Waterline first, then Floor.

• Floor Only: Cleans only the pool floor for up to 12 hours.
• Wall & Waterline Only: Focuses on vertical surfaces and the waterline.
• Full Coverage: Cleans the entire pool (floor, walls, and waterline) for up to 7 hours.
• Wall & Waterline first, then Floor: Prioritizes walls and waterline before moving to the floor.
• Turbo Mode: Delivers 200% suction power for stubborn debris, available in all modes.

5.3 Auto-Parking and Retrieval

When the battery is low, the iGarden K Pro 120 automatically parks itself underwater along the pool wall for easy retrieval.

Figure 6: The robotic pool cleaner positioned along the pool wall, demonstrating its auto-parking feature when the battery is low.

Use the provided retrieval hook to lift the cleaner out of the water. The device will automatically drain water as it is lifted, making it lighter to handle.

6. Maintenance

6.1 Cleaning the Filter Basket

Regularly clean the 4L top-load filter basket to ensure optimal performance.

Figure 7: A view of the large 4L top-load filter basket with 180µm mesh, designed to capture fine debris.

1. Open the top cover of the cleaner.
2. Remove the filter basket by lifting it out.
3. Empty any collected debris into a waste bin.
4. Rinse the filter basket thoroughly with a garden hose until all debris is washed away.


Figure 8: A person rinsing the collected debris from the filter basket using a garden hose.

5. Reinstall the clean filter basket back into the cleaner and close the top cover.

7. Troubleshooting

If you encounter issues with your iGarden K Pro 120, try the following solutions:

• Device not moving or cleaning effectively: Check if the filter basket is full and clean it. Ensure the battery is fully charged. Verify that there are no large obstacles impeding movement.
• App connectivity issues: Ensure your device is connected to a 2.4GHz Wi-Fi network and Bluetooth is enabled. Perform app setup on land before submerging the robot.
• Device getting stuck: The adaptive mobility should handle most pool terrains. If it consistently gets stuck, check for unusual obstacles or debris in the pool.

For persistent issues, refer to the Warranty and Support section for customer service contact information.

8. Specifications

9. Warranty and Support

iGarden is committed to providing high-quality products and excellent customer service.

Figure 9: The iGarden K Pro 120 Robotic Pool Cleaner displayed with icons indicating 24/7 customer support, 30-day free returns, and a 3-year full replacement protection.

• 3-Year Warranty: The iGarden K Pro 120 comes with a 3-year full machine replacement protection.
• 30-Day Free Returns: Enjoy 30-day free returns for any reason.
• 24/7 Customer Support: For any questions or assistance, please contact iGarden customer support.