Introduction
Thank you for choosing GenSwin Rechargeable Flameless LED Candles. This manual provides detailed instructions for the safe and efficient use of your new flameless candles. Please read this manual thoroughly before operation and retain it for future reference.
Package Contents
Verify that all items listed below are included in your package:
- 3 x Black Flameless LED Candles (D3” x H4”/5”/6”)
- 1 x Charging Base
- 1 x Remote Control
- 1 x USB Charging Cable
- 1 x User Manual (this document)
Product Overview
The GenSwin Rechargeable Flameless LED Candles are designed to provide ambient lighting with the safety and convenience of LED technology. Each candle features a glass exterior and real wax interior, mimicking traditional candles without an open flame. The set includes a charging base for easy recharging and a remote control for convenient operation.
Setup
- Unpack: Carefully remove all components from the packaging.
- Initial Charge: Before first use, fully charge the candles. Place each candle onto the charging pins of the charging base. Connect the USB charging cable to the charging base and a suitable USB power adapter (not included). Refer to the 'Charging Instructions' section for details.
- Remote Control: Ensure the remote control has a working battery. Remove any plastic tab if present.
Charging Instructions
The candles are rechargeable, eliminating the need for frequent battery replacement.
- Place the candles securely on the charging base. Ensure the metal contacts on the bottom of the candles align with the charging pins on the base.
- Connect the provided USB charging cable to the charging base and then to a standard USB power source (e.g., wall adapter, computer USB port).
- Charging indicator lights on the base will illuminate to show charging status.
- A full charge typically takes 2-3 hours.
- Once fully charged, the candles can operate for approximately 60 to 100 hours, depending on usage and settings.
Operating Instructions
The candles are controlled using the included remote control.
- Power On/Off: Locate the ON/OFF switch at the bottom of each candle. Slide it to the 'ON' position. Then, use the 'ON' and 'OFF' buttons on the remote control to turn all candles on or off simultaneously.
- Timer Function: Press the '2H', '4H', '6H', or '8H' button on the remote to set a timer. The candles will automatically turn off after the selected duration and turn on again at the same time the next day. To cancel the timer, press the 'OFF' button.
- Brightness Adjustment: Use the '+' and '-' buttons on the remote to increase or decrease the brightness of the LED flame.
- Flicker/Steady Mode: Press the 'Candle' button for a realistic flickering flame effect. Press the 'Light' button for a steady, non-flickering light.
Maintenance
- Cleaning: Wipe the glass exterior with a soft, dry cloth. Do not use abrasive cleaners or immerse in water.
- Storage: When not in use for extended periods, ensure candles are fully charged and store them in a cool, dry place.
- Battery Care: The candles contain built-in rechargeable batteries. Do not attempt to replace them.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Candles do not turn on. | ON/OFF switch is off. Battery is depleted. | Slide the switch to 'ON'. Place candles on the charging base and charge fully. |
| Remote control not working. | Remote battery is dead. Obstruction between remote and candles. | Replace the remote control battery. Ensure a clear line of sight to the candles. |
| Candles flicker irregularly or dimly. | Low battery. | Recharge the candles fully. |
| Charging indicator not lighting up. | Charging cable or adapter issue. Candles not properly seated on base. | Check cable and adapter connections. Try a different USB port/adapter. Ensure candles are firmly placed on the charging pins. |
Specifications
| Feature | Detail |
|---|---|
| Brand | GenSwin |
| Model Number | FCDBL142-BK-S03 |
| Product Dimensions | 3"D x 3"W x 6"H (various heights: 4", 5", 6") |
| Material Type | Glass (exterior), Wax (interior) |
| Light Source Type | LED |
| Power Source | Battery Powered (Rechargeable) |
| Charging Time | 2-3 hours |
| Operating Time (Full Charge) | 60-100 hours |
| Control Method | Remote Control, Slide Switch |
| Indoor/Outdoor Usage | Indoor |
| Color | Rechargeable-Black |
Warranty and Support
GenSwin provides a 30-day manufacturer warranty for this product. For warranty claims or technical support, please contact your retailer or visit the official GenSwin website for further assistance.
Please retain your proof of purchase for warranty purposes.