1. Product Overview
The Thermaltake View 290 TG ARGB Mid Tower PC Chassis is designed for optimal component visibility and cooling performance. It features a unique curved tempered glass front panel and a standard tempered glass side panel, offering a clear view of your internal build. This chassis supports up to 360mm radiators, GPUs up to 450mm in length, PSUs up to 200mm in length, and air coolers up to 180mm in height. It includes an updated motherboard tray compatible with both standard and hidden connector motherboards, and a rotatable PCIe tray for flexible GPU orientation.
2. Setup and Installation
2.1 Unpacking and Initial Inspection
Carefully remove the chassis from its packaging. Inspect for any signs of damage during transit. Ensure all accessories are present:
- Accessory box (screws, zip ties, etc.)
- User Manual (this document)
2.2 Component Installation
Follow these general steps for installing your PC components. Refer to your individual component manuals for specific instructions.
- Motherboard Installation: Install your ATX or mATX motherboard onto the standoffs. The updated motherboard tray supports both standard and hidden connector motherboards for cleaner cable management.
- CPU Cooler Installation: Install your CPU cooler. The chassis supports air coolers up to 180mm in height and liquid coolers (AIO) up to 360mm radiators.
- Graphics Card (GPU) Installation: Install your GPU into the PCIe slot. The rotatable PCIe tray allows for horizontal or vertical GPU mounting (riser cable sold separately for vertical mounting). The chassis accommodates GPUs up to 450mm in length.
- Power Supply Unit (PSU) Installation: Install your PSU into the dedicated compartment at the bottom of the chassis. The chassis supports PSUs up to 200mm in length and features a built-in PSU cover for cable management.
- Storage Drive Installation: Install your 3.5" HDDs or 2.5" SSDs. The chassis provides maximum support for up to two 3.5" HDDs or two 2.5" SSDs.
- Fan Installation: The chassis comes with three pre-installed 120mm ARGB Lite fans (two intake, one exhaust). Additional fans can be installed as per the fan compatibility list in the specifications section.
3. Operation
3.1 Power On/Off
Press the power button located on the top panel to turn on your PC. Press and hold the power button for a few seconds to perform a forced shutdown, or use the operating system's shutdown function for a proper shutdown.
3.2 I/O Ports
The top panel provides convenient access to various ports:
- 2 x USB 3.0 ports
- 1 x USB 3.2 Gen 2 Type-C port
- HD Audio jacks (headphone/microphone)
- Power button
- Reset button
3.3 ARGB Lighting Control
The pre-installed ARGB Lite fans feature fascinating lighting effects. These can be controlled by compatible motherboard software from brands such as ASUS, GIGABYTE, MSI, and ASRock. Refer to your motherboard's manual for specific software instructions.
4. Maintenance
4.1 Cleaning
To maintain optimal performance and aesthetics, regularly clean your PC chassis. Use a soft, dry cloth for exterior surfaces. For internal components, use compressed air to remove dust buildup. Ensure the PC is powered off and unplugged before cleaning.
4.2 Dust Filters
The chassis is equipped with dust filters to prevent dust from entering. Regularly remove and clean these filters to ensure unrestricted airflow and efficient cooling.
5. Troubleshooting
If you encounter issues with your PC build within the Thermaltake View 290 chassis, consider the following general troubleshooting steps:
- No Power: Ensure all power cables (PSU to wall, PSU to motherboard, CPU, GPU) are securely connected. Check the power switch on the PSU.
- No Display: Verify that your monitor cable is connected to the graphics card (not the motherboard's integrated graphics ports, unless intended). Reseat the graphics card and RAM modules.
- Overheating: Check fan connections and ensure they are spinning correctly. Clean dust filters and internal components. Verify CPU cooler installation.
- Fan Noise: Ensure fans are securely mounted and not obstructed. Adjust fan speeds via motherboard software if available.
- ARGB Lighting Issues: Confirm ARGB cables are correctly connected to the motherboard's ARGB headers. Use compatible motherboard software to control lighting effects.
For persistent issues, consult the manuals for your individual components or seek professional technical support.
6. Technical Specifications
| Feature | Specification |
|---|---|
| Brand | Thermaltake |
| Series | View 290 Snow |
| Model Number | CA-11G-00M6WN-00 |
| Case Type | Mid Tower |
| Motherboard Compatibility | ATX, Micro-ATX (supports hidden connector motherboards) |
| Material | Alloy Steel, Tempered Glass |
| Color | White |
| Item Weight | 21.1 pounds |
| Package Dimensions | 22.5 x 21.2 x 12.1 inches |
| GPU Clearance | Up to 450mm |
| PSU Clearance | Up to 200mm |
| CPU Cooler Height | Up to 180mm |
| Radiator Support | Up to 360mm (Top) |
| Pre-installed Fans | 3 x 120mm ARGB Lite Fans |
| I/O Ports | 2 x USB 3.0, 1 x USB 3.2 Gen 2 Type-C, HD Audio |
6.1 Fan Compatibility List
6.2 All-in-One (AIO) Cooler Compatibility List
7. Warranty and Support
7.1 Warranty Information
This product is covered by Thermaltake's standard warranty. Please refer to the official Thermaltake website or your purchase documentation for detailed warranty terms and conditions. Extended protection plans may be available for purchase separately.
7.2 Customer Support
For technical assistance, product inquiries, or warranty claims, please visit the official Thermaltake support website or contact their customer service department. Keep your proof of purchase handy when contacting support.
