1. Introduction
This manual provides detailed instructions for the safe and effective operation of your elecci S168 Drone. The S168 Drone is equipped with a high-resolution 1080P HD camera, a robust brushless motor, and an innovative screen controller for an enhanced flying experience. Key features include Waypoint Fly, Optical Flow Localization, Active Obstacle Avoidance, and One Key Take Off/Landing functionality.
Figure 1: elecci S168 Drone and Screen Controller
2. Package Contents
Ensure all items listed below are present in your package:
- elecci S168 Drone
- Screen Controller
- Rechargeable Batteries (x2)
- Handbag
- Camera
- SD Card
- USB Charging Cable
- Spare Propellers
- Propeller Guards (optional)
- Screwdriver
Figure 2: Complete package contents of the elecci S168 Drone.
3. Setup
3.1 Drone Assembly
- Carefully unfold the drone arms until they click into place. Ensure all four arms are fully extended.
- If desired, attach the propeller guards by snapping them onto the designated points on each arm.
3.2 Battery Installation and Charging
- Insert a fully charged battery into the battery compartment at the rear of the drone until it clicks securely.
- To charge the drone battery, connect the USB charging cable to the battery and a power source. The red light on the battery will stay on during charging and automatically turn off when fully charged.
3.3 Controller Setup and Charging
- Ensure the screen controller is fully charged. Connect the USB charging cable to the controller and a power source. The red light on the controller will stay on during charging and automatically turn off when fully charged.
- Attach the joystick controls to the remote controller by screwing them into the designated ports.
Video 1: Remote control charging and basic setup instructions.
Video 2: Overview of the elecci S168 Drone and Screen Controller features.
4. Operating Instructions
4.1 Power On/Off
- Power On Drone: Press and hold the power button on the top of the drone until the indicator lights illuminate and you hear a startup sound.
- Power On Controller: Press and hold the power button on the screen controller until the screen turns on.
- Pairing: The drone and controller will automatically attempt to pair. Wait for the drone's indicator lights to become solid, indicating a successful connection.
- Power Off: Press and hold the power buttons on both the drone and controller until they shut down.
4.2 Takeoff and Landing
- One Key Take Off: Place the drone on a flat, open surface. Press the One Key Take Off button on the controller. The drone will automatically ascend and hover at a stable altitude.
- One Key Landing: Press the One Key Landing button. The drone will automatically descend and land gently.
4.3 Flight Controls
Use the joysticks on the screen controller to maneuver the drone:
- Left Joystick: Controls altitude (up/down) and rotation (left/right).
- Right Joystick: Controls forward/backward and left/right strafing movements.
- Speed Adjustment: The controller features multiple speed modes (e.g., low, medium, high) to suit different skill levels and wind conditions. Refer to the controller's buttons for speed selection.
Figure 3: Screen Controller displaying real-time drone footage.
4.4 Camera Operation
The S168 Drone is equipped with a 1080P HD camera for capturing photos and videos.
- Adjustable Camera Angle: Use the dedicated buttons on the controller to adjust the camera's vertical angle during flight.
- Photo/Video Capture: Use the photo and video buttons on the controller to capture aerial imagery. Footage is saved to the included SD card.
Figure 4: Detail of the drone's 1080P HD camera.
4.5 Special Features
- Optical Flow Localization: This feature provides stable hovering, especially useful for indoor flight or in areas with minimal GPS signal.
- Active Obstacle Avoidance: The drone can detect and avoid obstacles in its flight path, enhancing safety and preventing collisions.
- 360° Flip: Execute impressive aerial stunts with a single button press.
- Waypoint Fly: Program a flight path for automated navigation.
Figure 5: Drone utilizing optical flow positioning for stable flight.
Video 3: Demonstration of the elecci S168 Drone's flight capabilities and screen controller.
5. Maintenance
- Battery Care: Store batteries in a cool, dry place. Do not overcharge or over-discharge.
- Propeller Replacement: If propellers are damaged, use the provided screwdriver to replace them with spare propellers. Ensure correct orientation (A and B propellers).
- Cleaning: Use a soft, dry cloth to clean the drone and controller. Avoid water or harsh chemicals.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Drone does not power on | Low battery; Incorrect battery installation | Charge battery; Reinstall battery correctly |
| Controller does not power on | Low battery | Charge controller |
| Drone and controller fail to pair | Interference; Incorrect pairing sequence | Move to an open area; Power cycle both devices and try again |
| Unstable flight | Strong wind; Uncalibrated gyroscope | Fly in calm conditions; Perform gyroscope calibration (refer to controller instructions) |
| Obstacle avoidance not working | Sensors obstructed; Feature disabled | Clean sensors; Ensure feature is enabled in settings |
7. Specifications
- Model Name: S168
- Brand: elecci
- Special Features: 360 Degree Flip, Auto Follow, Brushless Motor, One Button Return, One Key Rotation, Optical Flow, Active Obstacle Avoidance
- Video Capture Resolution: 1080p
- Effective Still Resolution: 2 MP
- Connectivity Technology: Bluetooth, Wi-Fi
- Item Weight: 0.4 Pounds (approx. 6.4 ounces)
- Product Dimensions: 3.2"L x 1.9"W x 5"H
- Battery Cell Composition: Lithium Ion
- Included Components: Battery, Camera, Handbag, SD Card, Screen Controller
Figure 6: Drone highlighting its brushless motor technology.
8. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the documentation provided with your purchase or contact elecci customer service directly. Keep your proof of purchase for warranty claims.