Olvy PRO Carpet and Upholstery Cleaner with Steam - User Manual

1. Introduction

Thank you for choosing the Olvy PRO Carpet and Upholstery Cleaner. This device is designed for deep cleaning and sanitizing various surfaces, including carpets, upholstery, mattresses, and car interiors, using a combination of powerful suction and high-temperature steam. Please read this manual thoroughly before first use to ensure safe and optimal operation.

2. Important Safety Instructions

Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, or injury.

• Read all instructions before using the appliance.
• Do not immerse the appliance in water or other liquids.
• Do not operate with a damaged cord or plug.
• Keep hair, loose clothing, fingers, and all parts of the body away from openings and moving parts.
• Use only as described in this manual. Use only manufacturer's recommended attachments.
• Do not use on wet surfaces if the appliance is not designed for wet pickup.
• Unplug from outlet when not in use and before cleaning or servicing.
• Exercise extreme caution when cleaning on stairs.
• Do not use to pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present.
• Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
• Do not use without filters in place.
• Steam is hot. Avoid direct contact with skin.

3. Package Contents

Verify that all items are present in the package:

• Olvy PRO Carpet and Upholstery Cleaner Unit
• Flexible Hose (1.7 meters)
• Wide Cleaning Brush Attachment
• Shoe Brush Attachment
• Transparent Window/Floor Nozzle
• Self-Cleaning Hose Nozzle
• Hose Holder
• Cord Holder
• 500ml Olvy Spot & Stain Remover
• User Manual

This image displays the main unit of the Olvy PRO cleaner along with all its attachments: the flexible hose, wide cleaning brush, shoe brush, transparent window/floor nozzle, self-cleaning hose nozzle, hose holder, cord holder, and a bottle of 500ml Olvy Spot & Stain Remover. These components are essential for the versatile cleaning capabilities of the device.

4. Product Overview

The Olvy PRO is a powerful 2-in-1 carpet and upholstery cleaner featuring both wet vacuuming and steam cleaning functions. It is designed for efficient and hygienic cleaning of various surfaces.

This diagram illustrates the key parts of the Olvy PRO cleaner: the handle, 1600 ml clean water tank, 950 ml dirty water tank, hose storage, large brush, and the included 500 ml cleaner bottle. Understanding these components is crucial for proper assembly and operation.

Key Features:

• Powerful Performance: 1650W heating power, 13,000 PA suction, and 100°C steam for effective stain removal.
• Large Water Tanks: 1600 ml clean water tank and 950 ml dirty water tank for extended cleaning sessions.
• Versatile Attachments: Includes multiple brushes and nozzles for various cleaning tasks.
• Hygienic Cleaning: Integrated sterilization function removes odors and microorganisms.
• Quick Start: Ready to use in approximately 10 seconds.
• Self-Cleaning Hose: Automatic self-cleaning function for the hose.

5. Setup and Assembly

1. Unpack: Carefully remove all components from the packaging.
2. Attach Hose: Connect the flexible hose to the main unit's suction port until it clicks into place.
3. Select Nozzle: Choose the appropriate cleaning nozzle (e.g., wide cleaning brush for carpets, transparent nozzle for windows) and attach it to the end of the hose.
4. Fill Clean Water Tank: Remove the clean water tank (1600 ml capacity). Fill it with clean water. For enhanced cleaning, add the provided Olvy Spot & Stain Remover to the clean water tank as per the instructions on the cleaner bottle. Do not exceed the MAX fill line.
5. Replace Tanks: Securely place the clean water tank and the empty dirty water tank (950 ml capacity) back into their respective positions on the main unit.
6. Power Connection: Plug the power cord into a grounded electrical outlet. The cord is 5 meters long for extended reach.

This image shows the Olvy PRO cleaner with its water tanks properly installed and the flexible hose connected, indicating it is ready for operation. The clean water tank is visible on the left, and the dirty water tank on the right.

6. Operating Instructions

6.1 Basic Operation

1. Power On: Press the power button on the control panel. The device will begin heating up for steam generation. This typically takes about 10 seconds.
2. Select Mode: The control panel allows selection of different cleaning modes (e.g., Hot, Cold, Steam, Sterilization). Choose the mode appropriate for your cleaning task.
3. Apply Solution/Steam: Hold the nozzle over the area to be cleaned. Press the trigger on the handle to spray cleaning solution or release steam.
4. Vacuum: Move the nozzle slowly over the wet area to vacuum up the dirty solution. Overlap strokes for best results.
5. Repeat: Continue cleaning in sections until the area is clean.

This image shows the Olvy PRO cleaner's nozzle being guided across a carpet, illustrating the process of applying the cleaning solution and simultaneously vacuuming up dirt and moisture. The transparent nozzle allows visibility of the cleaning action.

6.2 Using Steam Function

The steam function is ideal for deep cleaning, sanitizing, and tackling stubborn stains. Ensure the "Steam" mode is selected on the control panel.

• Allow the device to fully heat up until the steam indicator is ready.
• Direct the nozzle onto the stained area. Press the steam trigger.
• Move the nozzle slowly to allow the hot steam (up to 100°C) to penetrate and loosen dirt.
• Follow with suction to remove the loosened dirt and moisture.

This image demonstrates the Olvy PRO cleaner's steam function in action on a carpet. Visible steam emanates from the nozzle, indicating the high-temperature cleaning process designed to effectively remove stains and sanitize surfaces.

6.3 Specific Cleaning Applications

• Carpets and Rugs: Use the wide cleaning brush. For heavily soiled areas, pre-treat with the cleaning solution.
• Upholstery and Sofas: Use the wide cleaning brush or the transparent nozzle. Test on an inconspicuous area first.
• Mattresses: The steam function is particularly effective for sanitizing mattresses and removing dust mites.
• Car Interiors: The compact design and flexible hose make it suitable for cleaning car seats and carpets.
• Windows and Hard Floors: Attach the transparent window/floor nozzle for streak-free cleaning.
• Shoes: Use the dedicated shoe brush attachment for cleaning footwear.

This visual guide illustrates the application of different nozzles for specific cleaning tasks: cleaning car seats, windows, stairs, and general carpet cleaning. It highlights the adaptability of the Olvy PRO for diverse surfaces.

7. Maintenance and Cleaning

Regular maintenance ensures the longevity and optimal performance of your Olvy PRO cleaner.

7.1 After Each Use

1. Empty Dirty Water Tank: Remove and empty the dirty water tank. Rinse it thoroughly with clean water.
2. Rinse Clean Water Tank: If any cleaning solution remains, empty and rinse the clean water tank.
3. Self-Cleaning Hose: Engage the self-cleaning function for the hose. This flushes out any residue.
4. Clean Nozzles/Brushes: Detach and rinse all used nozzles and brushes under running water. Allow them to air dry.
5. Wipe Down Unit: Wipe the exterior of the main unit with a damp cloth.

This image series illustrates the cleaning cycle: from the dirty water collected in the tank to the visibly clean carpet after use. It emphasizes the importance of emptying the dirty water tank for hygiene and proper maintenance.

7.2 Filter Maintenance

Check the filter regularly for debris. Rinse the filter under cold water and allow it to air dry completely before reinserting. Do not operate the cleaner without the filter in place.

7.3 Storage

Store the appliance in a dry, cool place. Wrap the power cord around the cord holder and store the hose and attachments using the provided holders.

8. Troubleshooting

9. Specifications

• Brand: Olvy
• Model: Tapijtreiniger PRO
• Power: 1650W
• Suction Power: 13,000 PA
• Steam Temperature: Up to 100°C
• Clean Water Tank Capacity: 1.6 Liters (1600 ml)
• Dirty Water Tank Capacity: 0.95 Liters (950 ml)
• Hose Length: 1.7 meters
• Power Cord Length: 5 meters
• Product Dimensions: 32 x 19 x 32 cm
• Weight: 5 kg
• First Available Date: June 16, 2025

10. Warranty and Support

For warranty information or technical support, please refer to the warranty card included with your product or visit the official Olvy website. Keep your purchase receipt as proof of purchase.

Contact Information: Please refer to the contact details provided on the product packaging or the official Olvy website for customer service.