1. Introduction
Thank you for purchasing the Basike Ba-TY163 Portable Projector. This manual provides essential information for setting up, operating, and maintaining your projector. Please read it thoroughly before use to ensure proper functionality and to maximize your viewing experience. This projector features Full HD 1080P resolution, 6D automatic keystone correction, auto focus, and versatile connectivity options including Wi-Fi and Bluetooth.
2. Important Safety Information
- Power Supply: Use only the provided power adapter. Ensure the voltage matches your local power supply (AC 100-240V, 50/60Hz).
- Ventilation: Do not block the ventilation openings. Ensure adequate space around the projector for proper airflow to prevent overheating.
- Eye Protection: Do not look directly into the projector lens when the lamp is on. The bright light can cause eye damage.
- Placement: Place the projector on a stable, level surface. Avoid placing it in direct sunlight, near heat sources, or in environments with high humidity or dust.
- Cleaning: Disconnect the power before cleaning. Use a soft, dry cloth for the exterior. For the lens, use a specialized lens cleaning cloth.
- Repairs: Do not attempt to disassemble or repair the projector yourself. Refer all servicing to qualified personnel.
3. Package Contents
Please check that all items are present in your package:
- Basike Ba-TY163 Portable Projector
- Power Adapter
- Remote Control
- User Manual
4. Product Overview
4.1 Projector Components
Familiarize yourself with the various ports and controls on your projector.

Image: Rear panel of the Basike Ba-TY163 Projector, highlighting the various input and output ports. From left to right, these include the wired network port, HD (HDMI) interface, USB interface, S/PDIF (optical audio) interface, AV/headphone signal interface, and the power cable interface at the bottom right.
- Lens: Front-facing projection lens.
- Power Button: Located on the device (specific location may vary, refer to physical device).
- Wired Network Port: For Ethernet connection.
- HD (HDMI) Interface: Connects to HDMI-enabled devices.
- USB Interface: For USB drives and other compatible devices.
- S/PDIF (Optical Audio) Interface: For digital audio output.
- AV/Headphone Signal Interface: For traditional AV input or 3.5mm audio output.
- Power Cable Interface: Connects the power adapter.
5. Setup
5.1 Initial Placement
Place the projector on a stable surface at the desired distance from your projection screen or wall. The optimal projection distance ranges from 1.2 meters (for a 40-inch screen) to 4.5 meters (for a 150-inch screen).
5.2 Power Connection
- Connect the power adapter to the projector's power cable interface.
- Plug the power adapter into a suitable electrical outlet.
- The projector will typically enter standby mode or power on automatically.
6. Operating Instructions
6.1 Power On/Off
- Power On: Press the power button on the projector or the remote control.
- Power Off: Press the power button again. Confirm shutdown if prompted.
6.2 Automatic Image Adjustment
The Basike Ba-TY163 features advanced automatic image correction for a hassle-free setup.

Image: A visual representation of the projector's 6D automatic keystone correction, showing how it adjusts the image to be perfectly rectangular on a wall, even with obstacles present.
- 6D Automatic Keystone Correction: The projector automatically detects the projection surface, corrects distortion, avoids obstacles in the beam path, and frames the image perfectly.
- Auto Focus: The projector automatically adjusts the focus to ensure a sharp and clear image without manual intervention.

Image: A close-up view of the projector's auto-focus feature, indicated by an 'AUTO FOCUS' graphic over a sharp image of a flower, demonstrating clear edges and corners.
6.3 Connectivity
The projector offers multiple ways to connect your devices.
6.3.1 Wi-Fi Connection (2.4G/5G)
Connect to your home network for online streaming and screen mirroring.
- Navigate to the 'Settings' menu on the projector.
- Select 'Network' or 'Wi-Fi Settings'.
- Choose your Wi-Fi network from the list and enter the password.
- Once connected, you can use screen mirroring features (e.g., Miracast for Android, AirPlay for iOS) or access built-in streaming apps.

Image: A user mirroring content from a smartphone to the projector via dual-band Wi-Fi (2.4G+5G), showing a stable and high-speed transmission for a seamless viewing experience.
6.3.2 Bluetooth Connection (5.3)
Connect external Bluetooth speakers or headphones for enhanced audio.
- Go to 'Settings' and select 'Bluetooth'.
- Turn on Bluetooth and put your external audio device into pairing mode.
- Select your device from the list to pair.
6.3.3 HDMI Connection
Connect devices like TV boxes, gaming consoles (Xbox, PlayStation), laptops, or streaming sticks (Fire Stick, Chromecast).
- Connect an HDMI cable from your external device to the projector's 'HD' port.
- Select the HDMI input source from the projector's input menu.
6.3.4 USB Connection
Play media files directly from a USB flash drive.
- Insert your USB drive into the projector's 'USB' port.
- The projector should automatically detect the drive or prompt you to open the media player.
- Navigate through your files to select videos, photos, or music.
6.3.5 AV Connection
Connect older devices using an AV cable (typically 3.5mm to RCA). Refer to the 'AV/Headphone Signal Interface' on the projector.
6.4 Image Quality
The projector delivers Full HD 1920x1080P resolution with support for 4K content. It features 1200 ANSI Lumens brightness and a 10000:1 contrast ratio for vibrant and detailed images.

Image: A vibrant, high-definition image of a flower projected onto a screen, illustrating the projector's 1920x1080p resolution and 4K quality support.

Image: A bright, realistic image of a phoenix projected onto a wall in a room with ambient lighting, showcasing the projector's high lumen output and uniform image brightness.
7. Maintenance
7.1 Lens Cleaning
To maintain optimal image clarity, regularly clean the projector lens.
- Turn off and unplug the projector before cleaning.
- Use a soft, lint-free lens cleaning cloth. Gently wipe the lens in a circular motion.
- For stubborn smudges, use a small amount of lens cleaning solution applied to the cloth (never directly to the lens).
- Avoid using abrasive materials or harsh chemicals, as they can damage the lens coating.
7.2 Ventilation
Ensure the projector's ventilation openings are clear of dust and obstructions to prevent overheating. Periodically use compressed air to gently clear dust from the vents.
7.3 Storage
When not in use for extended periods, store the projector in a cool, dry, and dust-free environment. Consider using a protective cover to prevent dust accumulation.
7.4 LED Lamp Life
The projector uses an LED light source with an ultra-durable life of up to 30,000 hours, significantly reducing the need for lamp replacement.
8. Troubleshooting
If you encounter issues with your projector, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Power cable not connected; Power outlet faulty; Projector in standby. | Ensure power cable is securely connected. Test outlet with another device. Press power button to turn on. |
| No image | Incorrect input source; Cable not connected; Lens cap on (if applicable). | Select correct input source (HDMI, USB, etc.). Check cable connections. Ensure lens is uncovered. |
| Blurred image | Auto focus issue; Projector too close/far; Lens dirty. | Allow auto focus to complete. Adjust projector distance within 1.2m-4.5m range. Clean the lens. |
| No sound | Volume too low; Muted; External audio device not connected/paired. | Increase volume. Check mute settings. Ensure Bluetooth device is paired or external speakers are connected correctly. |
| Wi-Fi/Bluetooth connection issues | Incorrect password; Device out of range; Interference. | Re-enter password. Move projector closer to router/device. Reduce interference from other electronics. |
| Overheating | Blocked ventilation; Prolonged use in hot environment. | Ensure vents are clear. Operate in a well-ventilated area. Allow projector to cool down. |
9. Specifications
Technical specifications for the Basike Ba-TY163 Portable Projector:
| Feature | Detail |
|---|---|
| Model Name | Ba-TY163 |
| Display Technology | LCD 3.5" |
| Native Resolution | Full HD 1920x1080p |
| Maximum Display Resolution | 1920x1080 (Supports 4K input) |
| Brightness | 1200 ANSI Lumens |
| Contrast Ratio | 10000:1 |
| Colors | 16.7 Million |
| Aspect Ratio | 16:9, 4:3 |
| Keystone Correction | Automatic 6D + Auto Obstacle Avoidance + Auto Framing |
| Focus | Automatic |
| Projection Size | 40" - 150" |
| Projection Distance | 1.2m - 4.5m |
| Light Source | LED |
| Light Source Life | Up to 30,000 hours |
| Connectivity | HDMI, USB, AV, Audio Out |
| Wireless Connectivity | Wi-Fi 2.4G/5G (802.11 a/b/g/n/ac/ax), Bluetooth 5.3 |
| Audio | Integrated 5W speaker |
| Power Consumption | 92W |
| Power Supply | AC 100-240V, 50/60Hz |
| Dimensions (LxWxH) | 209 x 170 x 129 mm (8.2 x 6.7 x 5.1 inches) |
| Weight | 1.1 kg (2.4 lbs) |
| Supported Languages | 23 languages (including Portuguese, English, Spanish, French) |
| Certifications | ANATEL: 23252-23-14103 |
10. Warranty and Support
10.1 Product Warranty
The Basike Ba-TY163 Portable Projector comes with a 1-year warranty from the date of purchase. This warranty covers manufacturing defects under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper maintenance.
10.2 Customer Support
For technical assistance, warranty claims, or any questions regarding your Basike Ba-TY163 projector, please contact the seller or Basike customer support through the platform where you purchased the product. Please have your purchase receipt and product model number ready when contacting support.