Introduction
The SAVIOR HEAT S66B Heated Gloves are designed to provide warmth and comfort during cold-weather activities. Featuring rechargeable batteries and adjustable heat settings, these gloves are suitable for various outdoor pursuits.
Figure 1: SAVIOR HEAT S66B Heated Gloves, front and back view.
Package Contents
- 1x Pair Heated Gloves
- 2x 7.4V 2200mAh Rechargeable Li-ion Batteries
- 1x Dual Charger
- 1x User Manual
- 1x Carry Bag
Setup
1. Charging the Batteries
Before first use, fully charge both 7.4V 2200mAh Li-ion batteries. Use the provided dual charger. The charging process typically takes 2-4 hours.
Figure 2: Connect batteries to the dual charger and plug into a power source. Ensure batteries are fully charged before initial use.
2. Inserting Batteries
Locate the zippered pocket on the cuff of each glove. Insert a fully charged battery into each pocket and connect it to the plug inside the pocket.
Figure 3: Battery insertion and connection process.
After connecting, close the zipper to secure the battery.
Video 1: Unboxing, fitting, and waterproof test of the SAVIOR HEAT Heated Gloves. This video demonstrates the initial setup and key features.
Operating Instructions
1. Power On/Off and Heat Adjustment
The gloves feature a control button on the back of the hand for easy operation.
- To Power On: Press and hold the ON/OFF button for 3 seconds. The indicator lights will illuminate, typically starting at the highest heat setting.
- To Adjust Heat Level: Short press the ON/OFF button to cycle through the three heat settings: High, Medium, and Low.
- To Power Off: Press and hold the ON/OFF button for 3 seconds until the indicator lights turn off.
Figure 4: Control button and heat level indicators on the glove.
2. Heating Temperature and Working Times
| Setting | Temperature | Approximate Duration |
|---|---|---|
| High (3 lights) | 60℃ / 140℉ | 2 hours |
| Medium (2 lights) | 50℃ / 122℉ | 4 hours |
| Low (1 light) | 40℃ / 104℉ | 6 hours |
Note: Actual battery duration may vary based on external temperature and usage.
3. Touchscreen Functionality
The index finger of each glove is equipped with touchscreen-compatible material, allowing you to operate smartphones or other touch devices without removing your gloves.
Figure 5: Touchscreen-compatible fingertip for device interaction.
4. Waterproof Feature
The gloves are designed with water-resistant and windproof materials to protect your hands from the elements.
Video 2: Demonstrating the SAVIOR HEAT Heated Gloves in use during winter activities.
Maintenance
1. Washing Instructions
It is recommended to hand wash the SAVIOR HEAT Heated Gloves. Remove batteries before washing. If the surface is dirty, wipe it clean and air dry. Do not machine wash or tumble dry, as this may damage the heating elements.
Figure 6: Hand washing is recommended for glove maintenance.
2. Battery Maintenance
To prolong battery life, charge the batteries every 2-3 months when not in use. Always fully charge batteries before storing them for extended periods.
Figure 7: Regular charging helps maintain battery health.
Troubleshooting
If your gloves are not heating or functioning correctly, please check the following:
- Ensure batteries are fully charged and properly connected inside the glove pockets.
- Verify that the ON/OFF button has been pressed and held for 3 seconds to activate the heating system.
- Check for any visible damage to the battery or charging cables.
- If issues persist, refer to the warranty and support section for further assistance.
Specifications
| Feature | Detail |
|---|---|
| Brand | SAVIOR HEAT |
| Model Name | S66B |
| Battery Type | 7.4V 2200mAh Li-ion (2 included) |
| Material | Polyester, Water Resistant, Windproof |
| Heating Elements | Covers fingers to fingertips and back of hand, enhanced in thumb and index finger |
| Heat Settings | 3 Levels (High, Medium, Low) |
| Special Features | Touchscreen compatible, Lightweight |
| Care Instructions | Hand Wash Only |
| Item Weight | 400 Grams |
Figure 8: Illustration of the 7-layer material construction for warmth and durability.
Warranty and Support
SAVIOR HEAT provides a 12-month warranty for these heated gloves. For any product problems or questions, please contact SAVIOR HEAT customer service. You can typically find contact information on the product packaging or the official SAVIOR HEAT website.
Please retain your proof of purchase for warranty claims.