1. Introduction
Thank you for choosing the UREVO CyberPad Smart Walking Pad. This manual provides essential information for the safe and efficient operation, setup, and maintenance of your new fitness equipment. Please read this manual thoroughly before using the product and retain it for future reference.
The UREVO CyberPad is designed to offer a convenient and effective way to incorporate walking and light jogging into your daily routine, especially in a home or office environment. Its innovative features include a 14% incline capability, an extended walking surface, LED remote control, speed-responsive lighting, and a quiet brushless motor.
2. Important Safety Information
WARNING: To reduce the risk of serious injury, read all instructions before using the UREVO CyberPad. Keep children and pets away from the equipment at all times.
- Place the walking pad on a flat, stable surface with adequate clearance around it (at least 2 feet behind and 1 foot on each side).
- Ensure the power cord is not pinched or damaged. Do not use extension cords.
- Always wear appropriate athletic footwear. Do not operate barefoot or in socks.
- Consult a physician before beginning any exercise program, especially if you have pre-existing health conditions.
- Do not allow more than one person on the walking pad at a time.
- Stop exercising immediately if you feel faint, dizzy, or experience pain.
- Unplug the walking pad from the power outlet when not in use or before cleaning/maintenance.
- Keep hands and feet clear of all moving parts.
3. Package Contents
Carefully unpack your UREVO CyberPad and verify that all components are present and undamaged. If any items are missing or damaged, please contact UREVO customer support immediately.
- UREVO CyberPad Smart Walking Pad (Main Unit)
- Power Cord
- Remote Control
- Safety Key
- User Manual (this document)
- Lubricant (for maintenance)
Note: Product images are not available in the provided data. Please refer to the packaging for visual representation of components.
4. Setup Guide
4.1 Unpacking and Placement
- Remove the walking pad from its packaging.
- Place the unit on a firm, level surface. Ensure there is at least 2 feet (60 cm) of clear space behind the unit and 1 foot (30 cm) on each side for safe operation and access.
- Avoid placing the unit on thick carpet, as this may interfere with ventilation.
4.2 Power Connection
- Locate the power input port on the walking pad.
- Connect the power cord to the walking pad and then plug the other end into a grounded 120V AC outlet.
- Ensure the power switch (if present) is in the OFF position before plugging in.
4.3 Remote Control Pairing (if applicable)
Refer to the specific instructions included with your remote control for initial pairing, if required. Typically, this involves holding down a button on the remote while powering on the walking pad.
4.4 UREVO SmartCoach App Installation
For personalized fitness guidance and tracking, download the UREVO SmartCoach App from your device's app store. Follow the in-app instructions to connect your CyberPad via Bluetooth.
5. Operating Instructions
5.1 Getting Started
- Ensure the safety key is properly inserted into its designated slot on the walking pad. The unit will not operate without the safety key.
- Stand on the side rails of the walking pad, not on the belt itself.
- Press the "Start" button on the remote control or the unit's console. The belt will begin to move at a low speed.
- Carefully step onto the moving belt and begin walking.
5.2 Adjusting Speed and Incline
- Speed: Use the "+" and "-" buttons on the remote control or console to increase or decrease the walking speed. Adjust gradually to a comfortable pace.
- Incline: The UREVO CyberPad features an auto incline function up to 14%. Use the incline buttons on the remote or console to adjust the incline level. The incline will change gradually.
5.3 Using Smart Features
- Speed-Responsive Lighting: The integrated 256 RGB ambient lighting will adjust based on your exercise rhythm. You can also select different lighting effects (flowing water, breathing, constant light) via the remote or app.
- UREVO SmartCoach App: Connect to the app for detailed workout data tracking, personalized workout plans, immersive running modes (City Run, Map Runs), and community challenges.
5.4 Stopping the Walking Pad
- Press the "Stop" button on the remote control or console. The belt will gradually slow down and come to a complete stop.
- Alternatively, pull the safety key to immediately stop the walking pad in an emergency.
- Once the belt has stopped, step off the unit.
Note: No official product videos were found in the provided data. Please refer to the UREVO official website for any available video tutorials.
6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your UREVO CyberPad.
6.1 Cleaning
- Always unplug the walking pad before cleaning.
- Wipe down the unit with a soft, damp cloth after each use to remove sweat and dust.
- Do not use abrasive cleaners or solvents.
6.2 Belt Lubrication
The walking belt requires periodic lubrication to reduce friction and extend its lifespan. The frequency depends on usage:
- Light Use (less than 3 hours/week): Every 5-6 months
- Moderate Use (3-5 hours/week): Every 3-4 months
- Heavy Use (more than 5 hours/week): Every 1-2 months
Procedure:
- Unplug the walking pad.
- Carefully lift one side of the walking belt.
- Apply a thin line of the provided silicone lubricant (or 100% silicone treadmill lubricant) along the center of the deck, underneath the belt.
- Repeat on the other side.
- Plug in the walking pad and run it at a slow speed (e.g., 1-2 mph) for 5 minutes to distribute the lubricant.
6.3 Belt Adjustment
If the walking belt starts to slip or drift to one side, it may need adjustment. Refer to the specific instructions in your full product manual or contact customer support for guidance on belt tensioning and centering.
7. Troubleshooting
This section addresses common issues you might encounter. If the problem persists, please contact UREVO customer support.
| Problem | Possible Cause | Solution |
|---|---|---|
| Walking pad does not power on. | Not plugged in; Power switch off; Safety key not inserted; Circuit breaker tripped. | Ensure power cord is securely plugged in; Turn power switch ON; Insert safety key fully; Check household circuit breaker. |
| Belt slips or hesitates. | Belt needs lubrication; Belt tension is too loose. | Lubricate the walking belt (see Section 6.2); Adjust belt tension (refer to full manual or support). |
| Unusual noise from the unit. | Loose components; Belt rubbing; Motor issue. | Inspect for loose screws; Check belt alignment; If noise persists, contact customer support. |
| Remote control not responding. | Dead batteries; Not paired; Interference. | Replace remote batteries; Re-pair remote control (see Section 4.3); Reduce interference sources. |
8. Product Specifications
The following are key specifications for the UREVO CyberPad Smart Walking Pad (Model: URTM038):
- Model Name: URTM038
- Brand: UREVO
- Motor: UREVO MegaPower Brushless Motor
- Incline Range: Up to 14% (Auto Incline)
- Running Area: Extended Full-track design (30% larger than traditional compact walking pads)
- Lighting: 256 RGB ambient lighting colors with flowing water, breathing, and constant light effects.
- Shock Absorption: Dual Shock Absorbent System with 8 built-in shock absorbers.
- Connectivity: UREVO SmartCoach App (Bluetooth)
- Suggested Users: Exercise & Fitness
- ASIN: B0FFGL21QT
- First Available: June 25, 2025
9. Warranty and Customer Support
UREVO stands behind the quality of its products. Your UREVO CyberPad Smart Walking Pad is covered by a limited warranty from the date of purchase. Please refer to the warranty card included with your product or visit the official UREVO website for detailed warranty terms and conditions.
For technical assistance, troubleshooting, parts replacement, or any other inquiries, please contact UREVO Customer Support:
- Website: www.urevo.com (Example URL, please verify official UREVO support page)
- Email: support@urevo.com (Example Email, please verify official UREVO support email)
- Phone: (Customer service number, if available)
Please have your model number (URTM038) and purchase date ready when contacting support.
