SMUG Drafting Chair User Manual

Product Overview

The SMUG Drafting Chair is designed for comfort and versatility in various workspaces, including standing desks, drafting tables, and bar-height surfaces. It features a height-adjustable design, flip-up armrests, an upgraded seat cushion, an ergonomic mesh backrest, and a sturdy foot-ring.

Figure 1: Front view of the SMUG Drafting Chair, showcasing its black mesh back, padded seat, and foot ring.

Figure 2: Another front view of the SMUG Drafting Chair, highlighting its overall design and proportions.

Figure 3: Side view of the SMUG Drafting Chair, showing the ergonomic curve of the backrest and the adjustable foot ring.

Figure 4: Back view of the SMUG Drafting Chair, illustrating the mesh back design and the sturdy frame.

Safety Information

Always use the chair as intended. Do not exceed the maximum weight capacity. Be cautious when adjusting the height and using the flip-up arms to avoid injury.

Ensure all components are securely fastened before use. Regularly inspect the chair for any signs of wear or damage. Do not stand on the chair or use it as a ladder.

Setup and Assembly

The SMUG Drafting Chair is designed for straightforward assembly. It is recommended to assemble the chair on a soft, clean surface to prevent scratches.

Package Contents:

• Seat Cushion
• Backrest
• Armrests (2)
• Gas Lift Cylinder
• Foot Ring
• Five-star Base
• Casters (5)
• Assembly Hardware (screws, washers, Allen wrench)

Figure 5: All components of the SMUG Drafting Chair laid out, including the seat, backrest, base, and hardware, ready for assembly.

Assembly Steps:

1. Attach Casters to Base: Insert the five casters into the holes at the end of each leg of the five-star base until they click securely into place.
2. Insert Gas Lift: Place the gas lift cylinder into the center hole of the five-star base.
3. Attach Foot Ring: Slide the foot ring over the gas lift cylinder and secure it at your desired height using the knob.
4. Attach Armrests to Seat: Align the armrests with the pre-drilled holes on the underside of the seat cushion. Secure them using the provided screws and Allen wrench. Ensure the flip-up mechanism is facing the correct direction.
5. Attach Backrest to Seat: Connect the backrest to the seat cushion using the designated screws. Ensure a firm connection for stability.
6. Connect Seat Assembly to Gas Lift: Carefully place the assembled seat and backrest onto the gas lift cylinder, ensuring it is centered and stable.

Figure 6: An illustration demonstrating the ease of assembly for the SMUG Drafting Chair, highlighting key connection points.

Operating Instructions

Height Adjustment:

To adjust the seat height, locate the lever under the right side of the seat cushion. While seated, pull the lever up to lower the chair. To raise the chair, stand up slightly and pull the lever up. Release the lever at the desired height. The seat height adjusts from 18.5 inches to 22.2 inches from the floor.

Figure 7: Close-up view of the air lift mechanism for seat height adjustment, showing the lever and gas cylinder.

Foot Ring Adjustment:

The 17.7-inch diameter metal foot ring can be adjusted to your most comfortable height. Loosen the knob on the side of the foot ring, slide the ring up or down along the gas lift, and then tighten the knob firmly to secure it in place.

Figure 8: Illustration of the height-adjustable foot ring, showing the knob used for securing its position.

Flip-up Armrests:

The armrests can be flipped up to allow the chair to be pushed closer to a desk or for activities requiring more arm movement, such as playing guitar or drawing. Simply lift the armrests upwards until they lock into the vertical position. To lower them, gently pull them down.

Figure 9: Diagram illustrating the flip-up armrests, seat air lift, and adjustable foot-ring features for enhanced adjustability.

360° Swivel and Rolling Wheels:

The chair features a 360-degree swivel function for easy rotation and smooth-rolling casters for mobility. These wheels are designed to be hardwood safe, preventing squeaking or scratching on various floor types.

Figure 10: Close-up of the 360-degree swivel wheels, designed for smooth movement and floor protection.

Figure 11: The chair's wheels on a hardwood floor, demonstrating their non-marking and quiet operation.

Maintenance

Cleaning:

To clean the chair, simply wipe it with a clean, damp cloth. For stubborn stains, a mild soap solution can be used, followed by wiping with a clean, dry cloth. Avoid using harsh chemicals or abrasive cleaners, as these can damage the mesh fabric or other components.

General Care:

• Periodically check all screws and bolts to ensure they are tight. Retighten if necessary.
• Keep the chair away from direct sunlight and extreme temperatures to prevent material degradation.
• Avoid placing heavy or sharp objects on the chair that could cause damage.

Troubleshooting

Specifications

• Brand: SMUG
• Model Name: SMUG Drafting Chair with Flip-up Arms
• Item Model Number: DC5A-FR3718
• Color: Black
• Product Dimensions: 18.5"D x 20.8"W x 48.82"H
• Seat Height Range: 18.5'' - 22.2'' (from floor)
• Armrest Height Range: 26.6'' - 30.3'' (from floor)
• Foot Ring Diameter: 17.7''
• Seat Cushion Thickness: Up to 3.5''
• Back Style: Mesh Back
• Special Features: Adjustable Height, Arm Rest, Ergonomic, Flip-up Arms, Foot Ring
• Fill Material: Foam
• Item Weight: 25.9 pounds
• Assembly Required: Yes
• Product Care Instructions: Wipe Clean

Warranty and Support

For warranty information and customer support, please refer to the documentation included with your purchase or visit the official SMUG website. SMUG is committed to providing quality products and customer satisfaction.

Protection plans are available for extended coverage. Please check with your retailer for details on available protection plans.

For further assistance, you may contact SMUG customer service through their official channels.