Introduction
Thank you for choosing the HOMCOM Bathroom Vanity Cabinet. This manual provides essential information for the safe assembly, operation, and maintenance of your new cabinet. Please read these instructions thoroughly before beginning assembly and retain them for future reference.

Image: The HOMCOM Bathroom Vanity Cabinet, a white unit with fluted doors, installed under a modern sink in a bathroom setting.
Safety Information
Important: This bathroom cabinet requires assembly. Follow the provided assembly instructions carefully to prevent injury or damage. Additionally, this cabinet includes anti-tip kits for enhanced safety, especially in households with children or pets. Ensure the anti-tip kits are installed correctly to prevent the cabinet from tipping over and causing injury.
- Always assemble the product on a clean, flat, and soft surface to avoid scratches.
- Ensure all parts are present and undamaged before assembly.
- Do not overtighten screws, as this may damage the engineered wood.
- Keep small parts and packaging materials away from children.
- Regularly check all connections and fasteners to ensure they remain secure.
Setup and Assembly
Pre-Assembly Check
Before starting, verify that all components listed in the packaging are present and undamaged. Refer to the separate assembly guide included in your package for detailed, step-by-step instructions and diagrams.
Key Assembly Features
- Sink Compatibility: The cabinet features a U-shaped cut-out (20x20 cm) designed to accommodate most pedestal-less sinks. Measure your sink carefully to ensure a proper fit.
- Soft-Close Hinges: The doors are equipped with soft-close hinges to prevent slamming and protect fingers. Install these according to the assembly guide for smooth and quiet operation.
- Anti-Tip Devices: Secure the cabinet to the wall using the provided anti-tip devices to prevent accidental tipping.

Image: A diagram illustrating the overall dimensions of the cabinet (60x33x63 cm) and internal shelf measurements, along with the U-shaped cut-out for the sink.

Image: Visual guide demonstrating that the cabinet is compatible with pedestal-less sinks (indicated by a green checkmark) and not suitable for sinks with pedestals (indicated by a red cross).

Image: A close-up view of the soft-close hinge mechanism, highlighting its function for smooth and silent door closure.
Operating Instructions
The HOMCOM Bathroom Vanity Cabinet is designed to provide organized storage for your bathroom essentials.
- Storage Compartments: Utilize the open compartment for frequently used items and the enclosed cabinet for other toiletries or cleaning supplies.
- Adjustable Shelf: The interior shelf can be adjusted to three different height levels, allowing you to customize the storage space to fit items of various sizes.
- Weight Capacity: The total maximum load capacity for the cabinet is 30 kg. The countertop can hold up to 10 kg, and each shelf can hold up to 10 kg. Do not exceed these limits.

Image: An interior view of the cabinet with its doors open, showcasing the adjustable shelf and various bathroom items neatly stored within the compartments.
Video: A short demonstration of the HOMCOM Bathroom Vanity Cabinet, highlighting its storage capacity, adjustable shelves, and soft-close doors in a bathroom setting.
Maintenance
To ensure the longevity and appearance of your HOMCOM Bathroom Vanity Cabinet, follow these maintenance guidelines:
- Cleaning: Wipe surfaces with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the melamine finish.
- Moisture Resistance: While the cabinet is designed to be moisture-resistant, promptly wipe away any standing water to prevent damage.
- Scratch Resistance: The engineered wood construction offers scratch resistance. However, use coasters or protective pads under heavy or sharp objects to prevent surface marks.
- Hardware Check: Periodically check and tighten all screws and fasteners to maintain structural integrity.
Troubleshooting
If you encounter any issues with your cabinet, consider the following common solutions:
- Wobbly Cabinet: Ensure all screws are securely tightened. Check that the cabinet is placed on a level surface. Adjust the anti-tip kit if necessary.
- Doors Not Aligning: The soft-close hinges are often adjustable. Refer to the assembly manual for instructions on how to adjust the hinges to align the doors properly.
- Difficulty Closing Doors: Check for any obstructions inside the cabinet or around the hinges. Ensure the hinges are clean and functioning correctly.
- Missing Parts: If any parts were missing upon delivery, contact HOMCOM customer service or your retailer for assistance.
Specifications
| Feature | Detail |
|---|---|
| Brand | HOMCOM |
| Model Number | 834-841V00WT |
| Color | White |
| Material | Engineered Wood |
| Finish | Melamine |
| Product Dimensions (D x W x H) | 33 cm x 60 cm x 63 cm |
| Item Weight | 15.6 Kilograms |
| Maximum Weight Capacity (Total) | 30 kg |
| Maximum Weight Capacity (Countertop) | 10 kg |
| Maximum Weight Capacity (Shelf) | 10 kg |
| Number of Doors | 2 |
| Door Style | Fluted Doors |
| Number of Shelves | 3 (including adjustable shelf) |
| Adjustable Shelf Levels | 3 |
| Special Features | Anti-tip, Soft-close, Adjustable Shelf, Moisture Resistant, Scratch Resistant |
| Assembly Required | Yes |
| Installation Type | Freestanding |
| Recommended Uses | Bathroom |
Warranty Information
For detailed warranty information regarding your HOMCOM Bathroom Vanity Cabinet, please refer to the warranty card included with your purchase or contact the retailer where the product was purchased. The availability of spare parts in the EU is typically 3 years from the date of purchase.
Customer Support
Should you require further assistance, have questions about assembly, or need to report a missing or damaged part, please contact HOMCOM customer support or your authorized retailer. Please have your model number (834-841V00WT) and purchase information ready when contacting support.





