Epilady Epilaser 808

Epilady Epilaser 808 At-Home Laser Hair Removal Device User Manual

For Light Skin Tones

1. Product Overview

The Epilady Epilaser 808 is an advanced at-home laser hair removal device designed for safe, intelligent, and permanent hair reduction on light skin tones. Utilizing patented SPOT™ (Smart Precise Optical Targeting) technology, it targets hair follicles with precision, offering a gentle and effective treatment experience.

Epilady Epilaser 808 device, packaging, and carrying case
Image 1.1: The Epilady Epilaser 808 device, its retail packaging, and a protective carrying case.

Key Features

  • SPOT™ Technology: Patented Smart Precise Optical Targeting identifies and eliminates hair follicles without targeting melanin in the skin.
  • Painless Treatment: Intelligent camera system targets only the follicle, avoiding moles, freckles, and sunspots.
  • Permanent Results: Four guided lasers deactivate hair follicles, inhibiting regrowth. Visible results in as few as three months with consistent use.
  • No Sun Restrictions: Gentle lasers do not affect skin, allowing for normal sun exposure after treatment.
  • Cordless & Convenient: Designed for ease of use in the comfort of your home.
Diagram illustrating Epilaser's SPOT technology components
Image 1.2: An exploded view diagram showcasing the internal components and patented SPOT™ Technology of the Epilaser device, including Dual-Wavelength Smart Image Processing, Advanced Algorithmic Treatment Determination, Motorized Multi-Directional Laser Guidance System, and Treatment-Specific Pulse Generator.

2. Safety Information and Important Warnings

Please read all safety instructions carefully before using the Epilady Epilaser 808 device. Failure to follow these instructions may result in injury or device malfunction.

  • Do not use on or around eyes, eyebrows, or eyelashes.
  • Do not use on wounded, broken, burned, or irritated skin.
  • Do not use on areas that are darker than your natural skin tone, including tattoos.
  • Keep out of reach of children.
  • Consult a physician before use if you have any underlying medical conditions or are taking medications that may affect skin sensitivity.
  • The device is FDA cleared for home use and dermatologist approved.
Woman using Epilaser device on her leg, with text 'No Sun Restrictions. No Goggles Required. No Burns.'
Image 2.1: A woman comfortably using the Epilaser device on her leg, highlighting the benefits of no sun restrictions, no goggles required, and no burns during treatment.

3. Skin and Hair Tone Compatibility

The Epilady Epilaser 808 is specifically engineered for light to medium skin tones and brown or black hair. It is designed for skin types 1 through 4 on the Fitzpatrick Scale. For optimal safety and effectiveness, ensure your skin and hair color fall within the compatible range.

Compatibility chart for Epilaser 808 showing suitable skin and hair colors
Image 3.1: A detailed chart indicating the compatibility of Epilaser 808 with various skin tones (Fitzpatrick Types 1-4: Pale, Ivory, Porcelain; Fair, Beige, Cream; Olive, Light Brown; Caramel, Medium Brown) and hair colors (Black, Dark Brown, Brown, Light Brown). Incompatible skin types (Bronze, Mahogany) and hair colors (Red, Light Blonde, White, Grey) are also clearly marked.

The Epilaser 808's SPOT™ technology ensures precise targeting of hair follicles, minimizing impact on surrounding skin. This precision allows for a gentle treatment experience compared to other methods.

Comparison table of Epilaser versus other laser and IPL treatments
Image 3.2: A comparison table outlining the differences between Epilaser, other lasers & IPLs, and salon treatments across various criteria such as treatment gentleness, targeting mechanism, permanence, flash limits, sun restrictions, and goggle requirements.

4. What's Included

Your Epilady Epilaser 808 package includes the following components:

  • Epilaser 808 Device
  • Power Adapter
  • USB Charging Cable
  • Protective Carrying Case
  • User Manual (this document)
Contents of the Epilaser 808 package: device, case, power adapter, and manual
Image 4.1: An overhead view of the Epilaser 808 package contents, including the device, its carrying case, power adapter, and instruction manual.

5. Setup and First Use

5.1 Charging the Device

  1. Connect the USB charging cable to the Epilaser 808 device.
  2. Plug the power adapter into a standard electrical outlet.
  3. Allow the device to fully charge before first use. The indicator light will change to show a full charge.

5.2 Powering On/Off

  • To power on, press and hold the power button until the indicator lights illuminate.
  • To power off, press and hold the power button again until the lights turn off.

6. Operating Instructions

6.1 Preparation for Treatment

  1. Ensure the treatment area is clean, dry, and free of lotions, oils, or deodorants.
  2. Shave the hair in the treatment area to approximately 2mm in length. This allows the laser energy to effectively reach the hair follicle.
  3. Perform a patch test on a small, inconspicuous area of skin 24 hours before full treatment to check for any adverse reactions.

6.2 Performing a Treatment

  1. Power on the Epilaser 808 device.
  2. Select the desired power level. The device offers 3 power levels for customizable treatments. Start with the lowest setting and gradually increase if comfortable.
  3. Place the treatment window firmly against your skin in the desired area. Ensure full contact for proper operation.
  4. The device's SPOT™ technology will automatically detect and target hair follicles. A flash will be emitted.
  5. Move the device to the next adjacent area, ensuring slight overlap to cover all hair.
  6. Continue this process until the entire desired area has been treated.
Diagram showing laser targeting hair follicles beneath the skin
Image 6.1: An illustration depicting the Epilaser's precise lasers targeting hair follicles beneath the skin surface, demonstrating the permanent and precise action of the device.

6.3 Treatment Frequency

For optimal results, use the Epilaser 808 two to three times per week. Consistent use is key to achieving permanent hair reduction within approximately three months.

Woman using Epilaser device on her leg
Image 6.2: A woman demonstrating the use of the Epilaser device on her leg, illustrating the ease of at-home treatment.

6.4 Applicable Body Areas

The Epilaser 808 can be used on various body areas, including:

  • Face (cheeks, upper lip, chin)
  • Underarms
  • Torso
  • Bikini Line
  • Back
  • Thighs
  • Calves
  • Buttocks

7. Maintenance and Care

7.1 Cleaning the Device

After each use, ensure the device is powered off and unplugged. Gently wipe the treatment window and the device's exterior with a soft, dry cloth. Do not use abrasive cleaners or immerse the device in water.

7.2 Storage

Store the Epilaser 808 in its protective carrying case in a cool, dry place, away from direct sunlight and extreme temperatures. Keep it out of reach of children.

8. Troubleshooting

If you encounter any issues with your Epilaser 808, please refer to the following common troubleshooting steps:

ProblemPossible CauseSolution
Device does not power onLow battery; Device not chargedEnsure the device is fully charged. Connect to power adapter and allow sufficient charging time.
No flash emittedTreatment window not in full contact with skin; Device not detecting hair follicle; Incorrect skin toneEnsure the treatment window is pressed firmly and completely against the skin. Verify your skin and hair tone are compatible with the device (refer to Section 3).
Device feels warmNormal operation; Prolonged useIt is normal for the device to warm up during use. If it becomes uncomfortably hot, turn it off and allow it to cool down before resuming.
Skin irritation after useHigh power setting; Sensitive skin; Improper preparationEnsure you performed a patch test. Reduce the power setting. Ensure skin is clean and dry before treatment. If irritation persists, discontinue use and consult a dermatologist.

If the problem persists after attempting these solutions, please contact customer support.

9. Specifications

  • Model: Epilaser 808
  • Brand: Epilady
  • ASIN: B0FF6HH8QH
  • UPC: 643620041536
  • GTIN: 643620041536
  • Package Dimensions: 8.93 x 4.84 x 4.8 inches
  • Weight: 13.76 ounces
  • Technology: Patented SPOT™ (Smart Precise Optical Targeting)
  • Skin Tone Compatibility: Fitzpatrick Skin Types 1-4 (Light to Medium Skin)
  • Hair Color Compatibility: Brown or Black Hair
  • Power Levels: 3 adjustable levels

10. Warranty and Support

10.1 Warranty Information

The Epilady Epilaser 808 device comes with a manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms, conditions, and duration. Retain your proof of purchase for warranty claims.

10.2 Customer Support

For technical assistance, troubleshooting not covered in this manual, or warranty inquiries, please contact Epilady customer support. Contact information can typically be found on the Epilady official website or on the product packaging.

Online Resources: Visit the official Epilady website for FAQs, product registration, and additional support materials.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.