1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Acegeek Tide Mid-Tower Gaming PC Case, model AG-TIDE-WH. Please read this manual thoroughly before beginning assembly to ensure proper setup and to maximize the lifespan of your components.
2. Product Overview
The Acegeek Tide is a compact Mid-Tower PC case designed for gaming and general computing builds. It features a tempered glass side panel for showcasing internal components and mesh elements for improved airflow. The case supports Micro-ATX and ITX motherboards and offers various expansion options.
Key Features:
- Material: SPCC (metal), ABS, and Tempered Glass
- Motherboard Support: Micro-ATX, ITX
- Drive Bays: 1 x HDD, 2 x SSD
- Expansion Slots: 5
- Front I/O: 3 x USB 2.0, Audio
- Cooling Support: Multiple fan and radiator mounting options
Figure 2.1: Front-side view of the Acegeek Tide PC Case, showcasing the tempered glass panel and internal fan mounts.
Figure 2.2: Top-front view of the Acegeek Tide PC Case, highlighting the top mesh panel and front I/O ports.
Figure 2.3: Dimensions diagram of the Acegeek Tide PC Case, showing its compact size (42cm H x 28cm D x 42.5cm W).
3. Setup and Installation
Follow these steps for proper component installation within the Acegeek Tide PC Case.
3.1 Preparing the Case
- Carefully remove the tempered glass side panel by unscrewing the retaining thumbscrews. Place the panel on a soft, flat surface to prevent scratches.
- Remove any other panels or covers as needed to access internal mounting points.
3.2 Motherboard Installation
- Install the I/O shield (if applicable) into the rear opening of the case.
- Align your Micro-ATX or ITX motherboard with the standoffs inside the case.
- Secure the motherboard using the provided screws.
3.3 Storage Drive Installation
The case supports 1 x HDD and 2 x SSDs.
- Locate the designated mounting points for 2.5" SSDs and 3.5" HDDs.
- Secure your SSDs and HDD using the appropriate screws.
3.4 Power Supply Installation
The case supports power supplies up to 190 mm in length.
- Slide the power supply into its designated compartment.
- Secure it with screws from the rear of the case.
3.5 Expansion Card Installation
The case has 5 expansion slots and supports VGA cards up to 290 mm in length.
- Remove the necessary expansion slot covers from the rear of the case.
- Insert your expansion card (e.g., graphics card) into the motherboard's PCIe slot.
- Secure the card with a screw.
3.6 Cooling System Installation (Fans/Water Cooler)
The case supports various fan and water cooler configurations:
- Top: 2 x 120mm fans or 240mm water cooler
- Rear: 1 x 120mm fan
- Side: 2 x 120mm fans
- Bottom: 2 x 120mm fans
Install fans and radiators into their respective mounting points using the provided screws. Ensure proper airflow direction for optimal cooling.
Figure 3.1: Interior view showing mounting points for front-side fans.
Figure 3.2: Top view with the top panel removed, revealing fan mounting locations.
Figure 3.3: Interior view showing mounting points for bottom fans.
3.7 Cable Management
The case provides 20 mm of space for cable management behind the motherboard tray. Route cables neatly to improve airflow and aesthetics. Use zip ties or Velcro straps to secure cables.
Figure 3.4: Rear view of the case, illustrating the cable management area behind the motherboard tray.
4. Operating Considerations
Once all components are installed and connected, ensure all cables are properly routed and secured. Close the side panels. Connect your peripherals and power cable, then power on your system.
4.1 Airflow Optimization
The Acegeek Tide case is designed with airflow in mind, featuring mesh panels. For optimal cooling performance, consider installing fans in all supported locations, ensuring a balanced intake and exhaust configuration. For example, front/side fans as intake and top/rear fans as exhaust.
4.2 Front Panel Connectivity
The front panel provides convenient access to 3 x USB 2.0 ports and audio jacks for headphones and microphones. Ensure these are connected to your motherboard's corresponding headers during setup.
5. Maintenance
Regular maintenance helps ensure optimal performance and longevity of your PC components.
5.1 Dust Filter Cleaning
The case includes dust filters to prevent dust buildup inside. Periodically remove and clean these filters using compressed air or by washing them with water and allowing them to dry completely before reinstallation.
5.2 General Cleaning
Wipe down the exterior of the case with a soft, damp cloth. For the tempered glass panel, use a glass cleaner and a microfiber cloth to avoid streaks. Avoid abrasive cleaners or solvents.
6. Troubleshooting
If you encounter issues during or after assembly, consider the following common troubleshooting steps:
- No Power: Check all power connections, including the power supply to the wall, the 24-pin ATX connector, and the 8-pin CPU power connector on the motherboard. Ensure the power supply switch is in the 'ON' position.
- No Display: Verify that your monitor is connected to the graphics card (not the motherboard's integrated graphics ports, unless you are using integrated graphics). Reseat the graphics card and RAM modules.
- Component Fit Issues: Due to the compact nature of this Mid-Tower case, ensure all components (especially large graphics cards, CPU coolers, and power supplies) adhere to the maximum dimensions specified in this manual.
- Overheating: Confirm that all fans are spinning and oriented correctly for optimal airflow. Ensure CPU cooler is properly seated and making good contact with the CPU.
7. Specifications
| Feature | Specification |
|---|---|
| Brand | Acegeek |
| Model Name | AG-TIDE-WH |
| Case Type | Mid Tower |
| Material | SPCC (metal), ABS, Tempered Glass |
| Motherboard Compatibility | Micro-ATX, ITX |
| Drive Bays | 1 x HDD, 2 x SSD |
| Expansion Slots | 5 |
| Front I/O Ports | 3 x USB 2.0, Audio |
| CPU Cooler Height (Max) | 150 mm |
| VGA Length (Max) | 290 mm |
| PSU Length (Max) | 190 mm |
| Cable Management Space | 20 mm |
| Cooling Method | Air |
| Fan Support - Top | 2 x 120mm |
| Fan Support - Rear | 1 x 120mm |
| Fan Support - Side | 2 x 120mm |
| Fan Support - Bottom | 2 x 120mm |
| Water Cooler Support - Top | 240 mm |
| Dimensions (P x L x A) | 28P x 42.5L x 42A cm |
Note: Fans are not included with the case and must be purchased separately.
8. Warranty and Support
8.1 Warranty Information
The Acegeek Tide Mid-Tower Gaming PC Case (AG-TIDE-WH) comes with a 12-month warranty from the date of purchase. This warranty covers manufacturing defects and material faults under normal use. It does not cover damage caused by improper installation, misuse, accidents, modifications, or unauthorized repairs.
8.2 Technical Support
For technical assistance, troubleshooting, or warranty claims, please contact Acegeek customer support through their official website or the retailer where the product was purchased. Please have your proof of purchase and product model number (AG-TIDE-WH) ready when contacting support.