Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your ACCOHOHO 22" Modern Nightstand with Charging Station. Please read all instructions carefully before assembly and use to ensure safe and proper functionality. Keep this manual for future reference.
Safety Information
WARNING: Failure to follow these safety instructions may result in injury or damage to the product.
- Assembly requires care to avoid injury. It is recommended that two people assemble this product.
- Do not exceed the maximum weight limit of 80 pounds (36.3 kg) on the tabletop.
- Secure the nightstand to a wall using appropriate anti-tip hardware (not included) to prevent tipping, especially in households with children or pets.
- Ensure all electrical connections for the charging station are properly made and that the power cord is not pinched or damaged.
- Keep liquids away from the charging station to prevent electrical hazards.
- Do not attempt to modify the product or its components. Use only original parts for replacement if necessary.
Package Contents
Before beginning assembly, verify that all parts listed below are present and undamaged. If any parts are missing or damaged, please contact ACCOHOHO customer support.
- Nightstand Frame Components (Engineered Wood)
- 3 Drawer Units
- Charging Station Unit (Pre-installed or separate)
- Assembly Hardware (Screws, dowels, cam locks, etc.)
- Assembly Tools (Basic tools may be included, but a screwdriver and hammer are often required and not always included.)
- Instruction Manual
Specifications
| Feature | Detail |
|---|---|
| Brand | ACCOHOHO |
| Model Number | LM089-223DBK |
| Product Dimensions (D x W x H) | 16" x 22" x 24" (40.6 cm x 55.9 cm x 61 cm) |
| Item Weight | 48.5 lbs (22 kg) |
| Maximum Weight Recommendation (Tabletop) | 80 lbs (36.3 kg) |
| Frame Material | Engineered Wood (FSC-certified) |
| Finish | Scratch- and Water-resistant |
| Number of Drawers | 3 |
| Drawer Dimensions (W x D x H) | 18.7" x 11.8" x 6.5" (top two) & 18.7" x 11.8" x 7.3" (bottom) |
| Charging Station | 2 AC Outlets (125V/12A), 2 USB Ports (5V/2.1A), 1 Type-C Port |
| Power Cord Length | 4.9 feet (1.5 meters) |
| Base Type | Pedestal (3.3" thick) |
| Assembly Required | Yes (Recommended 2 people) |
| Room Type | Bedroom, Living Room |
Image: Detailed dimensions and material information for the nightstand.
Setup and Assembly
Assembly is required for this nightstand. Please follow the steps carefully. It is recommended to have two people for assembly.
- Unpack and Identify Parts: Carefully remove all components from the packaging. Lay them out on a clean, soft surface to prevent scratches. Refer to the included parts list to identify each piece and ensure nothing is missing.
- Assemble the Main Frame: Follow the diagrams in your separate assembly guide to connect the side panels, back panel, and base. Ensure all cam locks and screws are tightened securely.
- Install Drawer Slides: Attach the drawer slides to the interior of the nightstand frame and to the sides of the drawer boxes as indicated in the assembly instructions. Ensure they are level and aligned for smooth operation.
- Assemble Drawers: Construct the three drawer boxes. Insert the bottom panels and secure the front and back panels.
- Install Push-to-Open Mechanisms: Mount the push-to-open mechanisms inside the cabinet, ensuring they align with the drawer fronts. These mechanisms allow for handleless drawer operation.
- Insert Drawers: Carefully slide the assembled drawers into the frame, ensuring they engage with the drawer slides and the push-to-open mechanisms.
- Connect Charging Station: If the charging station is not pre-installed, carefully place it into the designated cutout on the tabletop and secure it. Route the power cord out the back of the unit.
- Final Placement and Stability Check: Position the nightstand in its desired location. Ensure it is stable and level. Consider securing it to a wall with anti-tip hardware for added safety.
Image: Details of the drawer interior, smooth sliding track, and the internal push-to-open mechanism.
Image: The nightstand in various room settings, highlighting its modern design.
Operating Instructions
Using the Charging Station
The integrated charging station provides convenient power access for your electronic devices.
- Plug In: Connect the nightstand's main power cord into a standard wall outlet.
- Connect Devices:
- For AC-powered devices (e.g., lamps, laptops), use the 2 AC outlets.
- For USB-powered devices (e.g., smartphones, tablets), use the 2 USB-A ports or the 1 Type-C port.
- Charging Indication: Devices will begin charging automatically once connected. There are no separate power switches for the charging ports.
Image: The recessed 5-in-1 charging station in use, powering various devices.
Operating Push-to-Open Drawers
The nightstand features handleless drawers with a push-to-open mechanism for a clean aesthetic.
- To Open: Gently press the center of the drawer front. The drawer will spring open slightly, allowing you to pull it out fully.
- To Close: Push the drawer firmly until it clicks into place and is flush with the nightstand frame.
- Adjustment: If a drawer does not open or close smoothly, the internal push-to-open latch may need adjustment. Refer to the troubleshooting section or the assembly guide for details on adjusting the latch by rotating it.
Image: The handle-free drawers in an open position, showcasing the storage capacity.
Video: Official product video demonstrating the features and operation of the ACCOHOHO 22" Modern Nightstand with Charging Station.
Maintenance
Proper care will help maintain the appearance and longevity of your nightstand.
- Cleaning: Wipe the surface with a soft, damp cloth. For tougher spots, use a mild, non-abrasive cleaner. Immediately wipe dry with a clean, dry cloth to prevent water damage, especially around the charging station.
- Avoid Harsh Chemicals: Do not use abrasive cleaners, strong solvents, or polishes that may damage the finish.
- Spills: Clean up spills immediately to prevent staining or damage to the engineered wood.
- Heat and Moisture: Avoid placing hot items directly on the surface. Use coasters for drinks. Keep the nightstand away from direct sunlight and excessive moisture.
- Regular Checks: Periodically check all screws and connections to ensure they remain tight. Retighten if necessary.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Drawer does not open when pressed. | Push-to-open mechanism misaligned or stuck. | Ensure you are pressing the center of the drawer. Check if the push-to-open latch is obstructed. The latch can be adjusted by rotating it to the left or right to change its extension. |
| Drawer does not close flush. | Drawer slides are misaligned or push-to-open latch is not retracting fully. | Check drawer slide alignment. Ensure no items are obstructing the drawer. Adjust the push-to-open latch if it's extended too far. |
| Devices are not charging via the charging station. | Nightstand not plugged in, power outage, or faulty device/cable. | Verify the nightstand's power cord is securely plugged into a working wall outlet. Test with a different device or charging cable. Check if the wall outlet is functional. |
| Nightstand feels wobbly. | Loose assembly hardware or uneven floor. | Retighten all assembly screws and cam locks. Place the nightstand on a level surface. Use shims if necessary to stabilize. |
Warranty and Support
This ACCOHOHO product comes with a limited manufacturer's warranty. For specific details regarding the warranty period and coverage, please refer to the warranty information provided at the time of purchase or contact ACCOHOHO customer service.
For assistance with assembly, missing parts, or any other product-related inquiries, please contact ACCOHOHO customer support directly. You can typically find contact information on the packaging or the seller's website.
Manufacturer: ACCOHOHO
Seller: ACCOHOHO (via Amazon)