MOVE SPEED YSPBZ70 Pro Max Portable Power Station User Manual

1. Introduction

Thank you for choosing the MOVE SPEED YSPBZ70 Pro Max Portable Power Station. This device is a high-capacity, versatile power bank designed to provide reliable power for your electronic devices during outdoor activities, travel, and emergency situations. Please read this manual carefully to ensure safe and optimal use of your power station.

Image 1.1: The MOVE SPEED YSPBZ70 Pro Max Portable Power Station, showcasing its compact design and multiple ports, along with the included USB-C cables.

2. Product Overview

The MOVE SPEED YSPBZ70 Pro Max is equipped with advanced features to meet diverse power needs:

• Mega Capacity: 70,000mAh / 260Wh for extended power supply.
• Fast Charging: Up to 145W total output with 140W PD 3.1 for rapid device charging.
• Quick Recharge: Achieves 0-50% recharge in approximately 1.5 hours using 100W input.
• Multiple Ports: Features 4 output ports (2x USB-C, 2x USB-A) and 2 input ports (USB-C) for simultaneous charging.
• Emergency Light: Integrated 3-level adjustable brightness flashlight with SOS mode.
• Smart Digital Display: Provides real-time battery percentage, current, and voltage output.
• Pass-Through Charging: Allows charging of devices while the power station itself is recharging.
• Low-Current Mode: Safely charges sensitive devices like wireless earbuds and smartwatches.

Image 2.1: A close-up view of the power station's top panel, highlighting the USB-C and USB-A output ports, the USB-C input/output port, and the digital display.

3. Setup

3.1 Initial Charging of the Power Station

1. It is recommended to fully charge your power station before first use.
2. Connect a compatible USB-C charging cable to the IN/OUT TYPE-C1 port on the power station.
3. Connect the other end of the cable to a power adapter (not included) with at least 100W output for optimal charging speed.
4. The digital display will show the charging status and battery percentage.

3.2 Connecting Devices

The power station supports various devices through its multiple ports:

• USB-C Ports (IN/OUT TYPE-C1, OUT TYPE-C2): Use these for devices requiring USB-C, such as laptops, tablets, and smartphones. The TYPE-C1 port supports up to 140W output, while TYPE-C2 supports up to 100W output.
• USB-A Ports (OUT USB-A1, OUT USB-A2): Use these for devices requiring USB-A, such as older smartphones, headphones, and other accessories. Both USB-A ports support up to 22.5W output.

Image 3.1: The power station connected to and charging a laptop, smartphone, and drone, demonstrating its multi-device charging capability.

4. Operating Instructions

4.1 Power On/Off

Press the Power button once to turn on the power station. The digital display will illuminate, showing the current battery percentage and output information. Press and hold the Power button for a few seconds to turn off the device.

4.2 Digital Display

The digital screen provides real-time information:

• Battery Percentage: Indicates the remaining charge.
• Current/Voltage Output: Shows the power being delivered to connected devices.

4.3 Charging Devices

Once the power station is on, simply connect your devices to the appropriate USB-C or USB-A output ports using their respective charging cables. The power station will automatically detect and begin charging your devices.

4.4 Emergency Light & SOS Mode

1. Turn On/Off: Double-tap the Power button to activate the flashlight. Double-tap again to turn it off.
2. Adjust Brightness: While the light is on, single-tap the Power button to cycle through three brightness levels (High, Medium, Low).
3. SOS Mode: Long-press the Power button while the light is on to activate SOS flashing mode.

Image 4.1: The power station's integrated flashlight providing illumination in a low-light environment, demonstrating its utility as an emergency light source.

4.5 Low-Current Mode

For charging low-power devices such as wireless earbuds or smartwatches, activate Low-Current Mode to prevent overcharging:

• Long-press the Power button until the digital display shows circling numbers.
• Connect your sensitive device.
• To exit Low-Current Mode, long-press the Power button again.

4.6 Pass-Through Charging

The power station supports pass-through charging, allowing you to charge your devices simultaneously while the power station itself is being recharged. Connect the power station to a power source and then connect your devices to the power station's output ports.

5. Maintenance

• Storage: Store the power station in a cool, dry place away from direct sunlight and extreme temperatures.
• Cleaning: Use a soft, dry cloth to clean the exterior of the power station. Do not use liquid cleaners or solvents.
• Battery Care: To prolong battery life, avoid fully discharging the power station frequently. Recharge it regularly, even if not in use.
• Avoid Impact: Do not drop or subject the power station to heavy impact.
• Disassembly: Do not attempt to disassemble or modify the power station, as this will void the warranty and may cause damage or injury.

6. Troubleshooting

• Device Not Charging:
  • Ensure the power station is turned on.
  • Check if the charging cable is securely connected to both the power station and your device.
  • Verify that your device's charging cable is not damaged.
  • Confirm the power station has sufficient charge.
• Power Station Not Recharging:
  • Ensure the input USB-C cable is securely connected to the power station and the power adapter.
  • Verify the power adapter is functioning correctly and plugged into a live outlet.
• Flashlight Not Working:
  • Double-tap the Power button to ensure it is activated.
  • Check the power station's battery level.
• Physical Swelling/Bulging: If you observe any physical swelling or bulging of the power station casing, discontinue use immediately. This indicates a potential battery malfunction and a safety hazard. Contact customer support for assistance.

7. Specifications

8. Warranty and Support

For warranty information and customer support, please refer to the documentation included with your product or contact Shenzhen Speedmobile Technology Co.,Ltd directly. Keep your purchase receipt as proof of purchase for any warranty claims.