FEELSO FS-LSGLDGNJSQ-1P04 Bidet Attachment with Filter Instruction Manual

Introduction

Thank you for choosing the FEELSO Bidet Attachment. This non-electric bidet is designed to enhance your personal hygiene with its advanced multi-stage water filtration system, dual self-cleaning nozzles, and adjustable water pressure. This manual provides detailed instructions for installation, operation, and maintenance to ensure optimal performance and a comfortable experience.

Important Safety Information

• Always turn off the main water supply valve to the toilet and empty the toilet tank before beginning installation or performing any maintenance.
• Ensure all connections are tightened securely to prevent leaks. Do not overtighten.
• Use only the provided components or approved replacement parts.
• If you encounter any difficulties or are unsure about any step, consult a qualified plumber.
• This product is designed for use with standard two-piece toilets. It may not be compatible with most one-piece toilets. Refer to the compatibility diagram in the installation section.

Package Contents

Please ensure all items are present before beginning installation:

• Bidet Body x 1
• T-Adapter x 1
• Teflon Tape x 1
• Circular Attachment Plates with Non-slip Mat x 2
• Cold Water Connection Braided Hose x 1
• Installation and User Guide x 1

Image: All components included in the FEELSO Bidet Attachment package.

Specifications

Setup and Installation

Follow these steps for a quick and easy installation. No plumber is needed.

1. Preparation: Turn off the toilet water supply valve and flush the toilet to empty the tank.
2. Remove Toilet Seat: Unscrew and remove your existing toilet seat.
3. Position Bidet Attachment: Place the FEELSO bidet attachment on the toilet bowl, aligning the adjustment plates with the toilet seat holes. Adjust the angle as needed.
4. Reinstall Toilet Seat: Place your toilet seat back over the bidet attachment and secure it with the original hardware. Ensure a snug fit.
5. Connect T-Adapter: Unscrew the water supply hose from the toilet tank. Screw the T-adapter onto the toilet tank's water supply interface. Ensure the pre-installed washer lies flat to prevent leaks.
6. Connect Hoses: Attach one end of the cold water connection braided hose to the T-adapter and the other end to the water inlet of the bidet attachment. Ensure all connections are hand-tightened, then use a wrench for a final snug turn.
7. Restore Water Supply: Slowly turn the main water supply valve back on. Check for any leaks.

Image: Simplified installation steps for the FEELSO Bidet Attachment.

Image: The FEELSO Bidet Attachment connected to the toilet's water supply.

Compatibility Check

This bidet attachment is compatible with most standard two-piece toilets. It is generally not compatible with one-piece toilets. Please measure your toilet according to the diagram below to ensure compatibility.

Image: Toilet compatibility guide with measurements for installation.

Installation Video Guide

Operating Instructions

The FEELSO Bidet Attachment offers multiple wash modes and adjustable water pressure for a personalized cleaning experience.

• Dual Spray Nozzles: The bidet features two targeted spray modes:
• Rear Wash: For posterior cleansing.
• Feminine Wash: A softer spray for frontal cleansing.
• Adjustable Water Pressure: Turn the knob on the control panel to adjust the water pressure to your preferred setting. Rotate clockwise for increased pressure and counter-clockwise for decreased pressure.
• Self-Cleaning Nozzle System: For enhanced hygiene, the bidet includes a self-cleaning function. After each use, the nozzles automatically retract behind a protective guard. To activate the self-cleaning mode, turn the knob to the designated self-cleaning icon.

Image: Overview of the bidet's three wash modes and adjustable water pressure control.

Image: Triple hygiene protection features of the bidet, including retractable nozzles and a protective guard.

Operation Video Guide

Maintenance

Regular maintenance ensures the longevity and optimal performance of your FEELSO Bidet Attachment.

• Filter Replacement: The bidet features an advanced multi-stage filtration system. Replace the filter every 4-6 months, depending on water conditions, to maintain effective filtration and prevent limescale accumulation. Correct replacement filters can be found in our store using ASIN: B0FT6XB7WZ.
• Nozzle Cleaning: Utilize the self-cleaning nozzle system regularly. For deeper cleaning, gently wipe the nozzles with a soft cloth and mild soap.
• General Cleaning: Clean the exterior of the bidet attachment with a soft, damp cloth and mild, non-abrasive cleaner. Avoid harsh chemicals that may damage the finish.

Image: Detailed view of the multi-stage water filtration system within the bidet.

Image: Step-by-step visual guide for replacing the bidet filter.

Filter Replacement Video Guide

Troubleshooting

If you encounter any issues with your FEELSO Bidet Attachment, please refer to the following common solutions:

• No Water Flow:
• Ensure the toilet water supply valve is fully open.
• Check if the T-adapter or hose connections are blocked or kinked.
• Verify that the filter is not clogged. Replace if necessary.
• Leaks:
• Tighten all connections, ensuring washers are properly seated.
• Apply additional Teflon tape to threaded connections if leaks persist.
• Check for cracks or damage in hoses or connectors.
• Weak Water Pressure:
• Ensure the water pressure knob is turned to a higher setting.
• Check if the filter is clogged and needs replacement.
• Verify that the main water supply to the toilet is fully open.
• Nozzle Malfunction:
• Activate the self-cleaning mode to clear any debris.
• Manually inspect nozzles for blockages and gently clean if necessary.

If these steps do not resolve the issue, please contact customer support.

Warranty and Support

FEELSO is committed to providing high-quality products and excellent customer service.

• Lifetime Technical Support: All customers who purchase this bidet receive a lifetime warranty for professional technical support.
• Contact Us: If you have any questions or require assistance with your product, please contact us through Amazon. We are dedicated to providing the best customer service.

Image: Customer support options for FEELSO products.