Garvee Bar Stools Instruction Manual

1. Safety Information

Please read all instructions carefully before assembly and use. Keep this manual for future reference.

• Always follow the assembly instructions carefully to ensure the chair is assembled correctly and safely.
• Do not exceed the maximum weight limit of 300 lbs (136 kg) to prevent injury or damage to the chair.
• Ensure all bolts and screws are securely tightened before use. Periodically check and re-tighten as necessary.
• Do not stand on the bar stool.
• Keep children away from the assembly area. Small parts may pose a choking hazard.

2. Product Overview

The Garvee Bar Stools are designed for comfort and durability, suitable for various settings such as kitchen islands, home bars, and dining areas. This set includes four counter height bar chairs featuring a modern black finish.

Figure 2.1: Garvee Modern Black Bar Stool

Key Features:

• Thick Cushioned Seat: High-density foam padding provides long-lasting comfort and support.
• Ergonomic Back & Footrest: Gently curved backrest and built-in footrest ensure comfortable leg positioning and natural seating posture.
• Sturdy Metal Frame: Reinforced metal construction offers stability and strength for both home and light commercial use.
• Easy-to-Clean PU Leather: Waterproof and stain-resistant PU leather allows for quick cleanup of spills and dust.

Figure 2.2: Detailed features of the Garvee Bar Stool

3. Package Contents

Before beginning assembly, ensure all parts are present and undamaged. If any parts are missing or damaged, please contact customer service.

Figure 3.1: Bar Stool Dimensions and Key Features

Each set typically includes:

• Bar Stool Frames (4 units)
• Upholstered Seats (4 units)
• Hardware Pack (screws, washers, Allen wrench)
• Assembly Instructions

4. Setup and Assembly Instructions

Assembly is straightforward and can be completed in a short time. Refer to the detailed step-by-step instructions included in your package for the most accurate guidance.

General Assembly Steps:

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches.
2. Attach Seat to Frame: Align the upholstered seat with the top of the chair frame. Secure it using the provided screws and Allen wrench. Do not fully tighten yet.
3. Assemble Footrest (if separate): If the footrest is a separate component, attach it to the chair legs using the designated hardware.
4. Tighten All Connections: Once all parts are loosely assembled, place the chair on a flat surface. Apply slight pressure to ensure it sits evenly, then fully tighten all screws and bolts.
5. Repeat for Remaining Stools: Follow the same steps for the other bar stools in the set.

Ensure all connections are firm and stable before using the bar stools.

5. Operating Instructions

These bar stools are designed for seating at counter height surfaces (typically 35-43 inches high). To ensure safe and proper use:

• Always sit centrally on the seat to maintain balance.
• Use the built-in footrest for comfortable leg positioning.
• Avoid sudden movements or leaning excessively, especially when getting on or off the stool.
• Do not use the stool as a step ladder or for purposes other than seating.

Figure 5.1: Bar Stools in a kitchen island setting

6. Maintenance and Care

Proper care will extend the life and appearance of your Garvee Bar Stools.

• Cleaning the PU Leather Seat: The waterproof PU leather can be easily cleaned with a damp cloth. For spills, wipe immediately with a soft, dry cloth. For stubborn stains, use a mild soap solution and then wipe clean with a damp cloth, followed by a dry cloth. Avoid harsh chemicals or abrasive cleaners.
• Cleaning the Metal Frame: Wipe the metal frame with a soft, damp cloth. Dry thoroughly to prevent rust. Avoid abrasive materials that could scratch the finish.
• Regular Inspection: Periodically check all screws and bolts to ensure they remain tight. Re-tighten as needed to maintain stability.
• Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause the PU leather to fade or crack over time.

7. Troubleshooting

If you encounter any issues with your bar stools, refer to the following common solutions:

• Wobbling Stool: Ensure all screws and bolts are fully tightened. Place the stool on a flat, even surface and re-tighten connections while applying slight downward pressure to ensure even leg contact.
• Loose Parts: If any parts feel loose, identify the corresponding screws or bolts and tighten them securely.
• Difficulty Assembling: Double-check the assembly instructions provided in the package. Ensure all parts are oriented correctly. Do not force parts together.

If problems persist, please contact Garvee customer service for assistance.

8. Specifications

9. Warranty and Customer Support

Garvee is committed to providing high-quality products and excellent customer service. If you have any questions, concerns, or require assistance with your bar stools, please do not hesitate to contact our customer service team.

• Our customer service team is ready to respond within 24 hours to assist you.
• Please have your model number (xf4g1rfhy733dt4EoS1BNgzo8BM54) and purchase information ready when contacting support.

For further assistance, please visit the Garvee Store on Amazon.