Important Safety Information
Please read all instructions carefully before assembly and use of the Polibi Full Size Upholstered House Daybed. Keep this manual for future reference.
- Ensure all parts are present and undamaged before beginning assembly. Do not use if any parts are missing or broken.
- Assemble the daybed on a soft, clean surface to prevent scratches.
- Tighten all bolts and screws firmly, but do not overtighten. Periodically check and re-tighten all fasteners to ensure stability.
- Do not allow children to climb on the daybed frame or roof structure.
- Maximum weight capacity for this daybed is 400 lbs. Do not exceed this limit.
- Keep small parts away from children during assembly to prevent choking hazards.
- Only use the recommended mattress thickness of 6 inches.
Setup and Assembly
The Polibi Full Size Upholstered House Daybed is designed for straightforward assembly. All necessary hardware and tools are included in the packaging. Please refer to the detailed step-by-step assembly instructions provided in the box with your product.
The daybed arrives in two boxes. Ensure you have both boxes before starting assembly.
Figure 1: Product Dimensions. This diagram illustrates the overall dimensions of the daybed, including length, width, height, and internal bed dimensions. Overall dimensions are 80"L x 57"W x 78.5"H. The recommended mattress thickness is 6 inches.
Figure 2: Key structural components. This image highlights the house-shaped roof frame, the texture of the corduroy fabric upholstery, and the wooden slat support system for the mattress.
Pre-Assembly Checklist:
- Verify all components listed in the packing list are present.
- Ensure you have adequate space for assembly.
- Have a Phillips head screwdriver and possibly a rubber mallet ready, though basic tools are provided.
Follow the numerical sequence in the provided assembly guide for optimal results.
Operating Instructions: Touch LED Light Strips
The Polibi House Daybed features integrated touch-sensor LED light strips on the roof structure, offering two distinct lighting options.
Functionality:
- Power On/Off: Gently touch the designated sensor area on the LED strip to turn the lights on or off.
- Color Selection: With the lights on, touch the sensor again to switch between the two available light colors:
- Bright White Light: Ideal for reading or general illumination.
- Soothing Warm White Light: Creates a cozy and relaxed atmosphere.
Figure 3: LED Light Options. This image demonstrates the daybed illuminated with both bright white light (left) and soothing warm white light (right), showcasing the two available color temperatures.
Maintenance
Proper care will ensure the longevity and appearance of your Polibi House Daybed.
- Upholstery Cleaning: For general cleaning, gently vacuum the corduroy fabric to remove dust and debris. For spills, blot immediately with a clean, dry cloth. For stubborn stains, use a mild fabric cleaner specifically designed for upholstery, testing on an inconspicuous area first. Do not saturate the fabric.
- Frame Care: Wipe the wooden and MDF frame components with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners.
- LED Lights: The LED light strips are designed for durability. If dust accumulates, gently wipe with a dry, soft cloth. Do not attempt to disassemble the LED strips.
- Fastener Check: Periodically (e.g., every 3-6 months) check all bolts and screws and re-tighten if necessary to maintain structural integrity.
Troubleshooting
If you encounter any issues with your Polibi House Daybed, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Daybed feels wobbly or unstable. | Loose fasteners. | Check and re-tighten all bolts and screws. Ensure the daybed is on a level surface. |
| LED lights are not turning on. | Power connection issue; sensor not activated. | Ensure the power adapter for the LED lights is securely plugged into a working outlet and into the daybed's connection point. Gently touch the sensor area to activate. |
| LED lights are not changing color. | Sensor not properly touched. | With the lights on, gently touch the sensor area again to cycle through the white and warm light options. |
| Missing parts during assembly. | Packaging error. | Do not proceed with assembly. Contact Polibi customer support immediately with your purchase details. |
Specifications
| Feature | Detail |
|---|---|
| Model | B0FDW8MJRH |
| Brand | Polibi |
| Size | Full |
| Color | Pink |
| Product Dimensions | 80"L x 57"W x 78.5"H |
| Frame Material | Pine Wood + MDF |
| Upholstery Material | Corduroy Fabric |
| Special Feature | House-shaped roof, Touch LED Light Strips (2 colors) |
| Weight Capacity | 400 lbs |
| Recommended Mattress Thickness | 6 inches (mattress sold separately) |
| Assembly Required | Yes (tools included) |
Warranty and Support
For warranty information and customer support, please contact Polibi directly. Details regarding your product's warranty period and terms are typically included with your purchase documentation or can be found on the official Polibi website.
When contacting support, please have your model number (B0FDW8MJRH) and proof of purchase readily available.
You can visit the Polibi store on Amazon for more information: Polibi Store
