1. Introduction
Thank you for choosing the Polibi Full Size Upholstered House Daybed. This manual provides detailed instructions for the safe assembly, operation, and maintenance of your new daybed. Please read all instructions carefully before beginning assembly and retain this manual for future reference.
This daybed features a unique house-shaped design, upholstered corduroy fabric, and integrated touch-sensor LED light strips, offering both comfort and functionality. It is designed to accommodate a full-size mattress (not included) and has a weight capacity of 400 lbs.
Image 1.1: Polibi Full Size Upholstered House Daybed in Grey with LED lights illuminated.
2. Safety Information
Please observe the following safety precautions to prevent injury and damage to the product:
- Weight Capacity: Do not exceed the maximum weight capacity of 400 lbs (181 kg). Overloading can cause structural failure and injury.
- Assembly: Assemble the daybed strictly according to the instructions. Ensure all bolts and fasteners are securely tightened before use. Periodically check and re-tighten fasteners.
- Placement: Place the daybed on a flat, stable surface. Avoid placing it near heat sources or in direct sunlight to prevent material degradation.
- Children: Supervise children around the daybed. Do not allow climbing on the frame or roof structure.
- LED Lights: Do not attempt to modify or repair the LED light strips. If damaged, contact customer support for assistance. Keep liquids away from electrical components.
- Mattress: Use a mattress that fits the full-size dimensions of the daybed. A recommended mattress thickness is 6 inches.
3. Package Contents
Your Polibi House Daybed is shipped in two (2) boxes. Please ensure all components are present and undamaged before beginning assembly. If any parts are missing or damaged, do not proceed with assembly; contact customer support immediately.
Expected Components:
- Headboard and Footboard panels
- Side rails
- House-shaped roof frame components
- Wooden slats for mattress support
- Touch LED light strips
- Hardware pack (screws, bolts, washers, Allen wrench)
- Instruction Manual
All necessary assembly tools are included in the hardware pack.
4. Assembly Instructions
Follow these steps carefully to assemble your Polibi House Daybed. It is recommended to have two adults for assembly.
Step-by-Step Guide:
- Unpack and Identify Parts: Lay out all components on a clean, soft surface (e.g., a rug or blanket) to prevent scratching. Identify each part using the provided parts list in the separate assembly diagram.
- Assemble Side Panels: Attach the side rails to the headboard and footboard panels using the provided hardware. Ensure all connections are snug but do not fully tighten bolts yet.
- Install Mattress Support Slats: Place the wooden slats across the assembled frame. Secure them using the designated fasteners. Ensure even spacing for optimal mattress support.
- Construct House Frame: Assemble the house-shaped roof components according to the diagrams. Attach the roof frame to the main bed frame.
- Install LED Light Strips: Carefully attach the touch LED light strips to the designated area on the roof frame. Ensure the touch sensor is accessible.
- Final Tightening: Once all components are in place, go back and securely tighten all bolts and fasteners. Do not overtighten.
- Placement: Position the assembled daybed in its desired location.
Image 4.1: View of the Polibi House Daybed frame, illustrating the structure before mattress placement.
Image 4.2: Detailed view showing the house-shaped roof, corduroy fabric upholstery, and wooden mattress slats.
5. Operating Instructions (LED Light Strips)
The Polibi House Daybed includes integrated touch-sensor LED light strips with two color options.
Functionality:
- Power On/Off: Gently touch the designated sensor area on the LED strip to turn the lights on or off.
- Change Color: With the lights on, touch the sensor again to switch between the two available colors: bright white light and soothing warm white light.
Image 5.1: Illustration of the two LED light color options: bright white and warm white, demonstrating their effect on the daybed's ambiance.
6. Maintenance
Proper care will extend the life and appearance of your daybed.
Cleaning:
- Upholstery: For general cleaning, gently vacuum the corduroy fabric with a soft brush attachment. For spills, blot immediately with a clean, dry cloth. For stubborn stains, use a mild fabric cleaner specifically designed for upholstery, testing on an inconspicuous area first.
- Frame: Wipe the wooden and MDF frame components with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners.
- LED Strips: Keep the LED strips clean and free of dust. Use a dry, soft cloth for cleaning.
General Care:
- Periodically check all bolts and fasteners to ensure they remain tight. Re-tighten as necessary.
- Avoid dragging the daybed when moving it; always lift to prevent damage to the frame and floor.
7. Troubleshooting
If you encounter any issues with your daybed, refer to the following troubleshooting guide:
| Problem | Possible Cause | Solution |
|---|---|---|
| Daybed feels wobbly or unstable. | Loose fasteners. Uneven floor. | Ensure all bolts and screws are securely tightened. Move the daybed to a level surface or use shims if necessary. |
| LED lights are not turning on. | Power connection issue. Damaged sensor/strip. | Check if the power adapter is properly connected. Ensure the touch sensor area is clean. If the issue persists, contact customer support. |
| Lights are stuck on one color. | Sensor malfunction. | Try touching the sensor multiple times. If it does not respond, contact customer support. |
| Missing parts during assembly. | Packaging error. | Do not proceed with assembly. Contact customer support with your purchase details and a list of missing parts. |
8. Specifications
Detailed specifications for the Polibi Full Size Upholstered House Daybed:
- Model: B0FDW63RK4
- Size: Full
- Color: Grey
- Product Dimensions (Overall): 80"L x 57"W x 78.5"H
- Recommended Mattress Thickness: 6 inches (mattress not included)
- Frame Material: Pine Wood + MDF
- Upholstery Material: Corduroy Fabric
- Weight Capacity: 400 lbs
- Special Feature: House-shaped roof, Touch LED Light Strips (White and Warm Light)
Image 8.1: Detailed diagram illustrating the dimensions of the Polibi Full Size House Daybed.
9. Customer Support
For any questions, concerns, or assistance with your Polibi Full Size Upholstered House Daybed, please contact the seller or manufacturer directly through your purchase platform. Please have your order number and product model (B0FDW63RK4) available for faster service.
While this product does not include a direct manufacturer's warranty statement in this manual, standard consumer rights and return policies apply. For information regarding optional protection plans, please refer to your purchase documentation.
