Faber Hood Trendy 60cm BLDC Autoclean Slant Shape Chimney User Manual

1. Introduction

This manual provides essential information for the safe and efficient operation, installation, and maintenance of your new Faber Hood Trendy 60cm BLDC Autoclean Slant Shape Chimney. Please read this manual thoroughly before using the appliance and retain it for future reference.

The Faber Hood Trendy chimney is designed to enhance your kitchen environment by effectively removing smoke, grease, and odors, ensuring a fresh and clean cooking space. It features advanced BLDC motor technology, auto-clean functionality, and intuitive touch and gesture controls.

2. Safety Information

Always adhere to the following safety precautions to prevent injury or damage to the appliance.

• Ensure the chimney is installed by a qualified technician in accordance with local regulations and this manual.
• Do not operate the chimney without the oil collector properly installed.
• Regularly clean the oil collector and the chimney to prevent grease buildup, which can be a fire hazard.
• Do not flambé under the chimney.
• Keep children away from the appliance during operation and cleaning.
• Disconnect the power supply before performing any maintenance or cleaning.
• Ensure adequate ventilation in the room when the chimney is operating simultaneously with other gas or fuel-burning appliances.

3. Product Overview and Features

The Faber Hood Trendy 60cm BLDC Autoclean Slant Shape Chimney incorporates several features for optimal performance and user convenience.

Key Features:

• Type: Vertical/Slant Shape, Wall Mounted
• Size: 60 cm (suitable for 2-4 burner stoves)
• Filter Type: Filterless design for reduced maintenance
• Suction Power: 1500 m³/hr for efficient smoke and odor removal
• Control Type: Intuitive Touch Control, Gesture Control, and Motion Sensor
• Number of Speeds: 9 adjustable speed settings
• Noise Level: Low noise operation at 58dB
• Ventilation: Ducted, designed for standard duct pipe connection
• Special Features: BLDC Motor for energy efficiency and quiet operation, Noise Reduction, Autoclean function, Built-In Oil Collector, 1 LED Lamp for illumination

Figure 3.1: Front view of the Faber Hood Trendy 60cm Chimney.

Figure 3.2: Illustration of the BLDC Motor and smart suction capability.

Figure 3.3: The chimney provides powerful yet quiet operation.

4. Setup and Installation

Installation should be performed by a certified technician. The following provides a general overview.

4.1 Wall Mounting

• Determine the optimal mounting height above your cooking surface, typically 65-75 cm for electric hobs and 70-80 cm for gas hobs.
• Mark drilling points on the wall according to the provided template (if applicable) and secure the mounting bracket.
• Carefully lift and attach the chimney unit to the wall bracket.

4.2 Ducting Connection

• Connect a standard size duct pipe from the chimney's exhaust outlet to an external vent.
• Ensure the ducting is as straight and short as possible with minimal bends to maximize airflow efficiency.
• Seal all duct connections to prevent air leakage.

4.3 Electrical Connection

• Connect the chimney to a grounded electrical outlet (230 Volts).
• Ensure the power supply matches the appliance's requirements.

5. Operating Instructions

Your Faber Hood Trendy chimney offers multiple control options for ease of use.

Figure 5.1: The chimney features both gesture and touch controls.

5.1 Touch Control Panel

The touch control panel is located on the front of the chimney. Gently press the icons to activate functions:

• Power Button: Turns the chimney On/Off.
• Speed Adjustment: Use '+' and '-' buttons to cycle through 9 suction speeds.
• Light Button: Controls the LED lamp.
• Autoclean Button: Initiates the automatic cleaning cycle.

5.2 Gesture Control

The chimney can be operated using hand gestures for convenience.

• Wave Left to Right: Turns the chimney On or increases suction speed.
• Wave Right to Left: Decreases suction speed or turns the chimney Off.

5.3 Motion Sensor

The motion sensor allows for hands-free operation. Specific gestures or proximity can activate/deactivate the chimney or adjust speeds.

6. Maintenance

Regular maintenance ensures optimal performance and longevity of your chimney.

6.1 Autoclean Function

The Autoclean feature helps maintain the internal components by melting and collecting grease. It is recommended to run the Autoclean cycle regularly, depending on your cooking frequency.

• Press the 'Autoclean' button on the control panel to start the cycle.
• The chimney will heat its internal components, causing accumulated grease to melt and drip into the oil collector.
• Once the cycle is complete, the chimney will automatically turn off.

Figure 6.1: Auto-Clean function icon.

6.2 Oil Collector Cleaning

The built-in oil collector gathers the grease removed during operation and the Autoclean cycle. It must be emptied and cleaned regularly.

• Ensure the chimney is turned off and disconnected from power.
• Carefully remove the oil collector, usually located at the bottom of the chimney.
• Empty the collected oil and wash the collector with warm, soapy water. Rinse thoroughly and dry before reinserting.

6.3 General Cleaning

• Wipe the exterior surfaces of the chimney with a soft, damp cloth and mild detergent.
• Avoid abrasive cleaners or harsh chemicals that could damage the finish.
• Clean the LED lamp cover gently if necessary.

7. Troubleshooting

Refer to the table below for common issues and their potential solutions.

If the problem persists after attempting these solutions, please contact Faber customer support.

8. Specifications

Detailed technical specifications for the Faber Hood Trendy 60cm Chimney.

9. Warranty and Support

9.1 Warranty Information

Your Faber Hood Trendy Chimney comes with a comprehensive warranty:

• Product Warranty: 2 Years Comprehensive Warranty
• Motor Warranty: 12 Years Warranty on Motor

Please retain your purchase receipt for warranty claims. The warranty covers manufacturing defects under normal use conditions.

9.2 Customer Support

For any service requests, technical assistance, or warranty claims, please contact Faber customer support:

• Manufacturer: Franke Faber India Pvt. Ltd.
• Contact Number: +91-801-000-2400
• Email: service@manufacturer.com
• Importer/Packer: Franke Faber India Pvt Ltd, 1086/1/2, SANASWADI, TAL - SHIRUR, PUNE - 412208, MAHARASHTRA, INDIA, contact no. 1800-209-3484