Important Safety Instructions
Before operating the FUNMILY Walking Pad, please read and understand all safety instructions. Retain this manual for future reference.
- Always place the walking pad on a flat, stable surface.
- Ensure adequate clear space around the walking pad during use.
- Keep children and pets away from the walking pad during operation.
- Do not use the walking pad if it is damaged or malfunctioning.
- Disconnect power before cleaning or performing maintenance.
- The maximum user weight capacity is 300 lbs (136 kg).
- Wear appropriate athletic footwear during use.
Product Overview
The FUNMILY Walking Pad is a compact and quiet under-desk treadmill designed for home and office use. It features a durable frame, a low-noise motor, and easy portability.
Image: A person walking on the FUNMILY Walking Pad positioned under a standing desk, demonstrating its intended use in a home or office environment. The pad is black with white accents.
Setup Instructions
- Unpacking: Carefully remove the walking pad from its packaging. The unit comes fully assembled.
- Placement: Place the walking pad on a firm, level surface. Ensure there is sufficient space around the unit for safe operation.
- Power Connection: Plug the power cord into a standard electrical outlet.
- Remote Control Setup: Open the battery compartment on the remote control and insert two AAA batteries (not included), observing polarity.
Image: The FUNMILY Walking Pad being easily transported using its built-in wheels. Insets show the transport wheel detail and the pad stored upright against a wall or under furniture, highlighting its space-saving design.
Operating Instructions
- Power On: Ensure the walking pad is plugged in. Locate the main power switch (usually at the front or rear of the unit) and turn it to the 'ON' position.
- Start Exercise: Stand on the walking pad. Press the 'Start' button on the remote control. The display will show a 3-second countdown before the belt begins to move at a low speed (e.g., 0.5 MPH).
- Adjust Speed: Use the 'Speed+' and 'Speed-' buttons on the remote control to increase or decrease the walking speed. The maximum speed is 4.0 MPH.
- Monitor Progress: The LED display on the walking pad will cycle through various metrics, including:
- TIME: Duration of your exercise session.
- SPEED: Current walking speed in miles per hour (MPH).
- DISTANCE: Total distance covered during the session.
- CALORIES: Estimated calories burned.
- Stop Exercise: Press the 'Stop' button on the remote control to safely bring the walking pad to a halt.
- Power Off: After use, turn off the main power switch and unplug the unit from the electrical outlet.
Image: A close-up view of the FUNMILY Walking Pad's LED display showing exercise metrics (Time, Speed, Distance, Calories) and a hand holding the remote control with clearly labeled Start, Stop, Speed+ and Speed- buttons.
Image: A collage illustrating various usage modes of the FUNMILY Walking Pad: working at a desk (0.5-1.5 MPH), general walking (1.5-2.5 MPH), and light running (2.5-4.0 MPH), showing the versatility of the device.
Maintenance
Regular maintenance ensures the longevity and optimal performance of your walking pad.
- Cleaning: Wipe down the walking pad with a damp cloth after each use. Avoid using abrasive cleaners or solvents.
- Lubrication: The walking belt requires periodic lubrication to reduce friction and extend its lifespan. Apply the included silicone oil (or a compatible treadmill lubricant) under the belt as instructed in the separate lubrication guide (if provided) or every 3-6 months depending on usage.
- Belt Adjustment: If the walking belt starts to slip or drift to one side, it may need adjustment. Refer to the specific instructions for belt tension and alignment in the full product manual or contact customer support.
Image: An exploded view illustrating the multi-layer construction of the FUNMILY Walking Pad's belt, highlighting features like knee protection, anti-slip surface, and shock absorption for user comfort and durability.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Walking pad does not power on. | Power cord not connected; main switch off; power outlet issue. | Ensure power cord is securely plugged in. Turn main power switch to 'ON'. Test outlet with another device. |
| Belt does not move after pressing 'Start'. | Safety key not in place (if applicable); remote control battery low; remote not paired. | Ensure any safety key is correctly inserted. Replace remote control batteries. Refer to pairing instructions if remote is unresponsive. |
| Belt slips or makes unusual noise. | Belt requires lubrication; belt tension too loose; belt off-center. | Lubricate the walking belt. Adjust belt tension or center the belt as per maintenance instructions. |
| Remote control is unresponsive. | Low or dead batteries; remote out of range; interference. | Replace batteries. Ensure remote is within operating range. Minimize potential interference. |
Specifications
- Brand: FUNMILY
- Model: B0FDQHBNK1
- Product Dimensions: 52"D x 23"W x 6"H (132cm D x 58cm W x 15cm H)
- Material: Alloy Steel
- Maximum Speed: 4 Miles per Hour (6.4 km/h)
- Motor Horsepower: 2.5 HP
- Weight Capacity: 300 lbs (136 kg)
- Noise Level: <45 dB
- Special Features: Compact design, Remote Control, LED Touch Screen, Transport Wheels
Image: An illustration highlighting the powerful and quiet 2.5 HP motor of the FUNMILY Walking Pad, along with key specifications such as a maximum speed of 4 MPH, low noise level (<45dB), and a 300 lbs weight capacity.
Image: A visual comparison demonstrating the wider track of the FUNMILY Walking Pad (16 inches wide) compared to other models, emphasizing the comfortable stride it provides for users.
Warranty and Support
For warranty information or technical assistance, please refer to the documentation included with your purchase or contact FUNMILY customer support. Keep your purchase receipt as proof of purchase.
Customer Support: Please visit the official FUNMILY website or contact your retailer for support options.