1. Safety Instructions
Please read and understand all instructions before assembly and use of this product. Failure to follow these instructions may result in injury or damage to the product.
- Keep all small parts and packaging materials away from children and pets.
- Assemble the bed on a soft, clean surface to prevent scratches.
- Ensure all connections are securely tightened before use. Periodically check and re-tighten as necessary.
- Do not exceed the maximum weight capacity of 1000 lbs.
- Use only the recommended mattress heights (6", 8", 10", 12") for optimal support and fit.
- Do not stand or jump on the bed frame.
- If any parts are missing or damaged, do not proceed with assembly. Contact customer support immediately.
2. Package Contents
Your Polibi King Size Luxury Upholstered Platform Bed is shipped in two manageable boxes. Please verify that all components are present before beginning assembly.
Components:
- Upholstered Headboard
- Upholstered Side Rails (2)
- Upholstered Footboard
- Center Support Beam
- Solid Wood Slats (20 pieces, 10cm wide)
- Support Legs (various, including adjustable height options)
- Hardware Pack (bolts, washers, nuts, L-wrench, hammer)
- Assembly Instructions
A power drill (not included) is recommended for quicker assembly.
3. Setup and Assembly
Follow these steps carefully to assemble your Polibi King Size Luxury Upholstered Platform Bed.
- Unpack and Identify Parts: Carefully remove all components from the packaging. Lay them out on a clean, soft surface. Refer to the parts list to ensure all pieces are present.
- Attach Side Rails to Headboard: Connect the upholstered side rails to the headboard using the provided hardware. Ensure the connections are firm but do not fully tighten yet.
- Attach Footboard: Connect the upholstered footboard to the other end of the side rails. Once all four sides are connected, gently tighten all bolts.
- Install Center Support Beam: Place the center support beam along the length of the bed frame. Secure it to the headboard and footboard brackets using the designated hardware.
- Attach Support Legs: Screw the support legs into the designated points on the frame and center support beam. Ensure they are stable and level.
- Install Slats: Lay the solid wood slats across the bed frame, fitting them into the designated slots or attaching them with screws if required. Ensure even spacing. The slats are 10cm wide for enhanced support.
- Adjust Mattress Height (Optional): The bed frame is designed to accommodate mattresses of 6", 8", 10", or 12" heights. Adjust the bed frame installation method as per the separate instructions provided in the package to achieve the desired mattress height. This typically involves adjusting the height of the support brackets for the slats.
4. Operation and Usage
Once assembled, your Polibi King Size Luxury Upholstered Platform Bed is ready for use.
- Mattress Placement: Carefully place your mattress onto the installed slats. The embedded design helps keep the mattress securely in place.
- Weight Capacity: The bed frame is designed to support up to 1000 lbs, including the mattress and occupants.
- Silent Sleep: Each support point is covered with sponge stickers to prevent noise, contributing to a quiet sleep environment.
5. Maintenance
Proper care will extend the life and appearance of your upholstered platform bed.
- Fabric Care: The bed is upholstered with premium, waterproof polyester fabric. For general cleaning, gently wipe with a damp cloth. For spills, blot immediately with a clean, dry cloth. Avoid harsh chemicals or abrasive cleaners.
- Dusting: Regularly dust the headboard and frame with a soft, dry cloth or a vacuum cleaner with a brush attachment.
- Hardware Check: Periodically check all bolts and connections to ensure they remain tight. Re-tighten as needed to maintain stability.
- Avoid Direct Sunlight: Prolonged exposure to direct sunlight may cause fabric fading.
6. Troubleshooting
Refer to this section for solutions to common issues.
- Squeaking Noises:
- Ensure all bolts and screws are securely tightened.
- Check that the slats are properly seated and not rubbing against the frame. The sponge stickers on support points are designed to prevent noise.
- Verify that the mattress is correctly positioned and not causing friction.
- Bed Feels Unstable:
- Re-check all connections, especially where the side rails meet the headboard and footboard, and the center support beam.
- Ensure all support legs are firmly attached and making even contact with the floor.
- Mattress Sliding:
- The embedded design should prevent mattress sliding. Ensure the mattress is fully seated within the frame.
- Verify that the correct mattress height setting was chosen during assembly.
7. Specifications
| Brand | Polibi |
| Model | King Size Luxury Upholstered Platform Bed |
| Size | King |
| Color | Beige (as per current product variant) |
| Product Dimensions | 96.5"L x 86.22"W x 43.3"H |
| Weight Capacity | 1000 lbs |
| Frame Material | Solid Pine Wood |
| Upholstery Material | Premium Waterproof Polyester Fabric |
| Headboard Features | Oversized, Padded with High-Density Cotton & Sponge |
| Slat Width | 10 cm |
| Compatible Mattress Heights | 6", 8", 10", 12" (adjustable) |
8. Warranty and Support
For specific warranty information and customer support, please refer to the documentation included with your purchase or contact Polibi customer service directly. Keep your purchase receipt for warranty claims.
If you encounter any issues not covered in this manual or require further assistance, please reach out to our support team.
Contact Information: Please refer to the contact details provided on the product packaging or the official Polibi website.
