ZEBRONICS ZEB-WHP 12

Zebronics Thunder Neo Wireless Headphone User Manual

Model: ZEB-WHP 12

Introduction

Thank you for choosing the Zebronics Thunder Neo Wireless Headphone. This manual provides essential information for setting up, operating, and maintaining your new headphones. Please read it carefully to ensure optimal performance and longevity of your device.

What's in the Box

Headphone - 1 Unit
Aux Cable - 1 Unit
Charging Cable (Type-C) - 1 Unit
QR Code Guide - 1 Unit

Product Overview & Key Features

The Zebronics Thunder Neo Wireless Headphone in blue.

The Zebronics Thunder Neo headphones are designed for an immersive audio experience with advanced features for both music and gaming.

Audio Performance

Zebronics Thunder Neo headphones highlighting 40mm drivers

40mm Dynamic Drivers: Experience rich, immersive sound with deep bass and clear audio, powered by high-performance 40mm drivers.

Zebronics Thunder Neo headphones showing 3 EQ modes

3 EQ Modes: Customize your audio experience with three distinct equalizer modes: Sound Monster for enhanced bass, Vocal Enhancer for clearer vocals, and Equalizer for a balanced audio profile.

Connectivity & Performance

Zebronics Thunder Neo headphones in gaming mode

Gaming Mode: Enjoy a smooth, low-latency gaming experience, ensuring minimal delay and accurate sound synchronization for competitive play.

Zebronics Thunder Neo headphones with Bluetooth and AUX support

Versatile Connectivity: Features Bluetooth v5.4 for seamless wireless connection and an AUX port for wired playback, offering flexible usage options.

Zebronics Thunder Neo headphones demonstrating dual pairing

Dual Pairing: Connect your headphones to two devices simultaneously and switch between them effortlessly for a hassle-free listening experience.

Battery & Charging

Zebronics Thunder Neo headphones showing 50 hours playback

Extended Playtime: Enjoy up to 60 hours of continuous playback at 50% volume on a single charge, powered by a built-in rechargeable battery.

Zebronics Thunder Neo headphones with rapid charging feature

Rapid Charge: Get up to 7 hours of listening time with just 10 minutes of charging via the Type-C port.

Comfort & Control

Zebronics Thunder Neo headphones with soft ear cushions

Soft Ear Cushions: Designed for maximum comfort, these lightweight, ergonomic headphones feature soft ear cushions for extended wear.

Zebronics Thunder Neo headphones with adjustable headband

Adjustable Headband: Achieve a comfortable and secure fit with the easily adjustable headband.

Zebronics Thunder Neo headphones with media controls

Media Controls: Convenient onboard buttons allow for easy control of music playback, calls, and volume.

Zebronics Thunder Neo headphones with voice assistant support

Voice Assistant Support: Access your device's voice assistant (e.g., Google Assistant, Siri) for hands-free control of music, calls, and alarms.

Zebronics Thunder Neo headphones with Environmental Noise Cancellation (ENC)

Environmental Noise Cancellation (ENC): Enjoy clear calls with reduced background noise, ensuring your voice is heard clearly in various environments.

Setup

Charging the Headphones

Before first use, fully charge your Zebronics Thunder Neo headphones. Use the provided Type-C charging cable to connect the headphones to a USB power source (e.g., computer, wall adapter). The LED indicator will show charging status. A full charge takes approximately 1.5-2 hours. For rapid charging, a 10-minute charge provides up to 7 hours of playback.

Bluetooth Pairing

Ensure the headphones are fully charged.
Press and hold the Power button until the LED indicator flashes blue and red, indicating pairing mode.
On your device (smartphone, tablet, laptop), enable Bluetooth and search for available devices.
Select "ZEB-THUNDER NEO" from the list of devices.
Once connected, the LED indicator will show a steady blue light or flash slowly.

Dual Pairing: To connect to a second device, first disconnect from the current device or put the headphones back into pairing mode. Connect to the second device. The headphones will remember both devices and can switch between them when both are in range and Bluetooth is active.

Wired Connection (AUX)

To use the headphones with a wired connection, plug one end of the provided 3.5mm AUX cable into the headphone's AUX port and the other end into your audio device's 3.5mm audio jack. The headphones will automatically switch to AUX mode.

Operating Instructions

Basic Controls

Power On/Off: Press and hold the Power button.
Play/Pause: Short press the Multi-function button (usually the center button).
Volume Up/Down: Short press the Volume + / Volume - buttons.
Next Track/Previous Track: Long press the Volume + / Volume - buttons.
Answer/End Call: Short press the Multi-function button.
Reject Call: Long press the Multi-function button.
Activate Voice Assistant: Double-press the Multi-function button.

EQ Modes

To switch between the 3 EQ modes (Sound Monster, Vocal Enhancer, Equalizer), locate the dedicated EQ button on the headphones and press it to cycle through the available modes.

Gaming Mode

Activate Gaming Mode for reduced audio latency during gameplay. Refer to the QR code guide for specific button presses to enable/disable this mode.

Maintenance

Clean the headphones regularly with a soft, dry cloth.
Avoid using harsh chemicals or abrasive materials.
Store the headphones in a cool, dry place away from direct sunlight and extreme temperatures.
Do not expose the headphones to water or excessive moisture.
Handle the cables gently to prevent damage.

Troubleshooting

Problem	Solution
Headphones not turning on	Ensure the battery is charged. Connect to a power source and try again.
Cannot pair via Bluetooth	Ensure headphones are in pairing mode (flashing blue/red LED). Make sure Bluetooth is enabled on your device. Move headphones closer to your device. Forget "ZEB-THUNDER NEO" from your device's Bluetooth list and try pairing again.
No sound	Check volume levels on both headphones and connected device. Ensure headphones are properly paired or AUX cable is securely connected. Try playing audio from a different source.
Poor call quality (ENC)	Ensure the microphone is not obstructed. Move to a quieter environment if possible. Check your device's call settings.

Specifications

Brand: ZEBRONICS
Model Name: ZEB-THUNDER NEO
Model Number: ZEB-WHP 12
Colour: Blue (Current variant)
Ear Placement: Over Ear
Form Factor: On Ear
Noise Control: Environmental Noise Cancellation (ENC)
Audio Driver Type: Dynamic Driver
Driver Size: 40mm
Frequency Range: 20Hz - 20,000Hz
Bluetooth Version: 5.4
Wireless Technology Type: Bluetooth
Headphone Jack: 3.5 mm Jack
Control Method: Push Button, Voice
Battery Average Life: Up to 60 Hours (at 50% volume)
Rapid Charge: 10 Minutes charge for 7 Hours use
Compatible Devices: Tablets, Desktops, Cellphones, Laptops, Smart Speaker, Television
Product Features: Environmental Noise Cancellation, 3 EQ Modes, Gaming Mode, Dual Pairing, Voice Assistant
Material: Plastic with soft cushioning
Item Weight: 160 Grams
Country of Origin: India

Warranty & Support

Your Zebronics Thunder Neo Wireless Headphone comes with a 1-year carry-in service center warranty from the date of purchase. Please retain your purchase receipt for warranty claims.

For technical support, service, or further inquiries, please refer to the contact information provided in the QR code guide included in your package or visit the official ZEBRONICS website.

Product Video Overview

Official product video showcasing the Zebronics Thunder Neo Wireless Headphone features, including 40mm drivers, Environmental Noise Cancellation, up to 60 hours battery life, and available color options.