VEVOR PY-2501SS

VEVOR PY-2501SS Jewelry Cabinet Armoire Instruction Manual

Model: PY-2501SS | Brand: VEVOR

Introduction

Thank you for choosing the VEVOR PY-2501SS Jewelry Cabinet Armoire. This standing wood jewelry storage chest is designed to provide organized and elegant storage for your valuable jewelry. It features a multi-layered design with drawers, a flip-top mirror, and side doors with necklace hooks to keep your items neatly stored and easily accessible.

Please read this manual thoroughly before assembly and use to ensure proper function and longevity of your jewelry armoire.

Key Features

  • Multi-Layered Design: Features a multi-compartment side-opening and drawer design for rings, necklaces, and earrings.
  • Large Capacity Drawers: Includes 3 spacious drawers for organizing various jewelry items.
  • Top Flip Mirror: A flip-open mirror with 4-compartment tray and ring slots for instant visibility and easy access.
  • Tangle-Free Necklace Hooks: 3 hooks on each side door, ideally sized for long necklaces to prevent tangling.
  • Durable Construction: Made with high-quality metal handles, sturdy MDF construction, and durable wooden legs.

Package Contents

Ensure all items are present and in good condition before proceeding with assembly.

  • 1 x Jewelry Box Body
  • 4 x Supporting Legs
  • 8 x Nickel Plated Flat Head Hex Screw (M6 x 30 mm)
  • 1 x Allen Wrench
  • 1 x User Manual (this document)

Setup and Assembly

The VEVOR Jewelry Cabinet Armoire comes mostly pre-assembled. Only the supporting legs require attachment.

  1. Carefully unbox the jewelry armoire and place the main body upside down on a soft, clean surface to prevent scratches.
  2. Identify the four supporting legs and the pre-drilled holes on the bottom of the armoire body.
  3. Align each supporting leg with the corresponding holes. Insert two M6 x 30 mm hex screws into each leg.
  4. Using the provided Allen wrench, tighten all 8 screws until the legs are securely fastened. Do not overtighten.
  5. Carefully turn the assembled armoire upright and place it in your desired location.
Diagram showing the dimensions of the VEVOR Jewelry Cabinet Armoire and its components.

Image: Dimensions and included components for assembly.

Video: Step-by-step guide on how to install the supporting legs of the jewelry armoire.

Operating Instructions

Top Flip Mirror and Compartments

Gently lift the top lid of the armoire to reveal a built-in mirror and a tray with 4 organized compartments. These compartments are ideal for storing rings, stud earrings, and other small accessories. The mirror allows for convenient jewelry pairing and appearance checks.

Close-up view of the VEVOR Jewelry Cabinet Armoire with its top lid open, revealing a mirror and organized compartments for rings and small jewelry.

Image: Top flip mirror and organized compartments.

Drawers

The armoire features 3 spacious drawers. Each drawer is lined with soft material to protect your jewelry from scratches. Use these drawers to store larger items like bracelets, watches, or other accessories.

Front view of the VEVOR Jewelry Cabinet Armoire, highlighting the three drawers and their dimensions.

Image: The three spacious drawers for various jewelry storage.

Side Doors with Necklace Hooks

Open the two side doors to access 3 hooks on each side, totaling 6 hooks. These hooks are designed to hang necklaces and prevent them from tangling, keeping them organized and ready to wear.

The VEVOR Jewelry Cabinet Armoire with its side doors open, revealing necklace hooks on both sides.

Image: Side doors with necklace hooks for tangle-free storage.

Video: A product overview demonstrating the features and compartments of the standing jewelry armoire.

Maintenance

  • Cleaning: Wipe the exterior surfaces with a soft, dry cloth. For stubborn marks, use a slightly damp cloth and mild wood cleaner, then dry immediately.
  • Interior Care: The velvet-lined interior can be gently vacuumed with a brush attachment or wiped with a lint-free cloth to remove dust.
  • Avoid Moisture: Keep the armoire away from excessive moisture and direct sunlight to prevent warping or fading of the wood.
  • Hardware: Periodically check that all screws and hinges are secure. Tighten if necessary.

Troubleshooting

  • Drawers sticking: Ensure the drawers are aligned properly. If they are stiff, a small amount of furniture wax on the runners may help.
  • Lid or doors not closing properly: Check for any obstructions. Ensure the armoire is on a level surface.
  • Wobbling: Verify that all supporting legs are securely tightened. Adjust the armoire's position on an even surface.

Specifications

AttributeDetail
BrandVEVOR
Model NumberPY-2501SS
StyleModern
Special FeatureMirror
Product Dimensions10"D x 13"W x 33.7"H (255 x 330 x 855 mm)
ShapeRectangular
Number of Drawers3
Item Weight19.84 Pounds (9 kg)
MaterialMDF + Wood Grain Paper
UPC197988336679

Warranty and Support

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official VEVOR website. Keep your purchase receipt as proof of purchase for any warranty claims.

Related Documents - PY-2501SS

Preview VEVOR MLS-SS1004 Jewelry Cabinet Assembly and User Manual
Comprehensive guide for the VEVOR MLS-SS1004 Jewelry Cabinet, featuring safety warnings, assembly instructions, parts list, and maintenance tips for optimal use and longevity.
Preview VEVOR Jewelry Cabinet MLS-SS1003: Assembly and Maintenance Manual
Official instruction manual for the VEVOR Jewelry Cabinet, model MLS-SS1003. Includes safety warnings, model parameters, parts list, step-by-step installation guide, and maintenance tips.
Preview VEVOR MLS-SS1005 Jewelry Cabinet Assembly and Maintenance Guide
Official assembly and maintenance manual for the VEVOR MLS-SS1005 Jewelry Cabinet. Includes safety guidelines, parts list, installation steps, and care recommendations.
Preview VEVOR Coat Locker Organizer IVY-VVR-014 Assembly Instructions
Assembly instructions and user guide for the VEVOR Coat Locker Organizer, model IVY-VVR-014. Includes safety precautions, parts list, and step-by-step assembly diagrams.
Preview VEVOR Pie Cut Lazy Susan Cabinet Blind Corner Organizer Assembly Guide
Assembly instructions, product parameters, and precautions for the VEVOR Pie Cut Lazy Susan Cabinet Blind Corner Organizer (Models PD1030D, PD1030C). Learn how to install and safely use this kitchen cabinet storage solution.
Preview VEVOR KL-FC01 Literature Organizer User Manual
User manual for the VEVOR KL-FC01 Literature Organizer. Provides assembly instructions, safety precautions, and technical specifications for this office storage solution. Ensure proper setup and usage for optimal organization.