1. Important Safety Warnings
Before operating your Ausom DT2 Pro Electric Scooter, please read this manual thoroughly and understand all safety instructions. Failure to follow these instructions may result in serious injury or property damage.
- Always wear a helmet and appropriate safety gear (knee pads, elbow pads, gloves) when riding.
- Familiarize yourself with local laws and regulations regarding electric scooter use.
- Do not ride in wet conditions, heavy rain, or through puddles.
- Ensure all bolts and fasteners are tightened before each ride.
- Maintain a safe speed and always be aware of your surroundings.
- Do not exceed the maximum weight limit of 287 lbs (130 kg).
- Avoid sudden braking, especially at high speeds, to prevent loss of control.
2. Package Contents
Verify that all items are present in the package:
- Ausom DT2 Pro Electric Scooter (folded)
- Charger
- User Manual
- Allen Keys (various sizes)
- NFC Cards
- Gloves
- Reminder Card
3. Setup and Assembly
The Ausom DT2 Pro Electric Scooter comes partially assembled. Follow these steps to complete the setup:
3.1 Unfolding the Scooter
- Loosen the folding mechanism on the stem.
- Carefully unfold the stem until it locks into the upright position.
- Turn the folding mechanism clockwise to securely tighten it.
3.2 Attaching the Handlebar
- Loosen the four screws on the stem clamp using the provided Allen key.
- Open the clamp and place the handlebar onto the stem, ensuring it is centered.
- Tighten the four screws to secure the handlebar firmly.
3.3 Securing the LCD Display
- Place the LCD display onto the handlebar clamp.
- Secure the top of the display to the handlebar with four screws.
- Fasten the bottom of the display with two screws to further secure it to the handlebars.
Figure 3.1: Ausom DT2 Pro Electric Scooter, shown both folded for transport and fully unfolded for riding.
Video 3.1: Official unboxing and initial assembly guide for the DT2 Pro electric scooter, demonstrating the unfolding and handlebar attachment process.
4. Operating Instructions
Learn how to operate your Ausom DT2 Pro Electric Scooter safely and efficiently.
4.1 Powering On/Off and LCD Display
The smart LCD dashboard provides real-time information. Press the power button to turn the scooter on or off. The display shows speed, distance, remaining battery power, and current riding mode.
4.2 Riding Modes and Motor Control
The DT2 Pro features single and dual-motor drive options with 6 speed settings, including Eco, Sport, and Race modes. Use the DDM button (Single/Dual Motor Switching Button) to switch between motor configurations. The thumb throttle controls acceleration.
Figure 4.1: Illustration of the DT2 Pro's dual motor capability, highlighting its speed, uphill climbing ability, and triple speed modes (Eco/Sport/Race).
4.3 Braking System
The scooter is equipped with anti-lock braking (E-ABS) and dual hydraulic disc brakes for responsive and shorter stopping distances. Apply both brake levers evenly for optimal braking performance.
Figure 4.2: Detailed view of the scooter's dual hydraulic disc brakes and E-ABS system, designed for enhanced safety.
4.4 Lighting System
The all-round lighting system includes headlights, rear brake lights, ambient lights, and joystick-controlled turn signals to enhance visibility and safety, especially during night rides.
Figure 4.3: The comprehensive lighting system of the DT2 Pro, ensuring safer and more visible rides.
4.5 Security Features
The DT2 Pro includes an NFC Security Lock for convenient and secure starting, preventing unauthorized use. It also features a Passcode Lock for added security. A hidden AirTag slot allows for discreet tracking (AirTag not included).
Video 4.1: A riding demonstration video, showcasing the scooter's performance in various outdoor environments. While titled for L2 MAX, it provides a general riding experience overview relevant to Ausom scooters.
5. Maintenance
Regular maintenance ensures the longevity and safe operation of your scooter.
5.1 Tire Care
The DT2 Pro is equipped with 10-inch puncture-proof tubeless tires. Regularly check tire pressure to ensure it is within the recommended range (refer to the tire sidewall for specific PSI). Proper tire pressure is crucial for ride quality, range, and preventing flats.
Figure 5.1: The robust 10-inch off-road tubeless tires, designed for stability on various terrains.
5.2 Brake System Inspection
Periodically inspect the hydraulic disc brakes for wear and tear. Ensure the brake levers operate smoothly and provide adequate stopping power. If you notice any issues, consult a qualified technician.
5.3 Battery Care
Charge the 52V/23.4AH battery regularly, even when not in use, to maintain its health. Avoid completely draining the battery. Store the scooter in a cool, dry place away from direct sunlight and extreme temperatures.
5.4 General Cleaning and Inspection
Clean the scooter with a damp cloth. Avoid using high-pressure water jets. Regularly check all visible cables, connections, and moving parts for any signs of damage or looseness. Ensure the dual swingarm suspension operates smoothly.
6. Troubleshooting
This section addresses common issues you might encounter with your Ausom DT2 Pro Electric Scooter.
6.1 Tire Losing Air
- Cause: Puncture, valve stem issue, or improper seating of the tubeless tire.
- Solution: Check the tire for visible punctures. Ensure the valve stem is tight. If the tire continues to lose air, it may require professional repair or replacement. Regular inspection and maintaining correct tire pressure can help prevent this.
6.2 Scooter Not Reaching Max Speed or Single Motor Mode Not Working
- Cause: Incorrect riding mode selected, low battery, motor malfunction, or controller issue.
- Solution: Verify you are in the correct riding mode (e.g., Race mode for max speed). Ensure the battery is fully charged. Check the DDM button for proper function. If the issue persists, contact customer support.
6.3 Scooter Not Powering On
- Cause: Low battery, loose connections, or power button malfunction.
- Solution: Charge the scooter fully. Check all visible cable connections for looseness. If the scooter still does not power on, contact customer support.
7. Specifications
| Feature | Specification |
|---|---|
| Model Name | DT2 Pro |
| Motor Power | 1100W*2 Brushless Motors (2200W total) |
| Max Speed | 42 Mph |
| Max Range | 71 Miles |
| Battery | 52V/23.4AH (1216.8WH) |
| Tire Size | 10 Inches (Off-Road Tubeless) |
| Braking System | Anti-lock Braking (E-ABS) and Dual Hydraulic Disc Brakes |
| Suspension Type | Dual Swingarm Suspension |
| Max Load Capacity | 287 lbs (130 kg) |
| Frame Material | Aluminum |
| Item Dimensions (LxWxH) | 52 x 27 x 53.5 inches |
| Climbing Angle | 53% (26°) |
8. Warranty and Support
The Ausom DT2 Pro Electric Scooter comes with a limited warranty. For detailed information regarding warranty terms, coverage, and how to make a claim, please refer to the warranty card included in your package or visit the official Ausom website.
For technical support, troubleshooting assistance beyond this manual, or spare parts inquiries, please contact Ausom customer service through their official channels. Keep your purchase receipt and serial number handy for faster service.
