1. Introduction
The ACEBEAM L35 is a high-performance tactical flashlight designed for various applications including long-range search, emergency situations, and tactical use. It features a powerful CREE XHP70.3 LED, delivering up to 5000 lumens and a beam distance of 650 meters. Its dual-switch design provides intuitive control, and its robust construction ensures reliability in demanding environments.
2. Product Overview
2.1 Package Contents
- L35 2.0 Tactical Flashlight (Battery Included) x 1
- Lanyard x 1
- Holster x 1
- O-rings x 2
- Spare rubber button cap x 1
- USB Cable x 1
- User Manual x 1
2.2 Key Features
- High Performance: Max output of 5000 lumens and 650 meters beam distance.
- Dual-Switches: Tactical tail switch for quick activation and a side switch for mode selection.
- Extended Runtime: Up to 12 days of continuous operation on lower settings.
- Durable Construction: IPX8-rated aluminum alloy body, resistant to 1.5-meter drops and submersible up to 5 meters.
- Rechargeable: Includes a rechargeable lithium-ion battery and USB charging cable.
2.3 Product Diagram
The following images illustrate the key components of the ACEBEAM L35 flashlight.
Figure 1: Front view of the ACEBEAM L35 Tactical Flashlight, showcasing the large reflector and side switch.
Figure 2: Side view of the ACEBEAM L35, highlighting the textured body, side switch, and tactical tail switch.
Figure 3: Top-down view of the ACEBEAM L35, showing the overall length and design.
3. Setup
3.1 Battery Installation
- Unscrew the tail cap of the flashlight counter-clockwise.
- Insert the included rechargeable lithium-ion battery with the positive (+) terminal facing towards the head of the flashlight.
- Screw the tail cap back on clockwise until it is securely tightened. Ensure the O-ring is properly seated to maintain water resistance.
3.2 Initial Charging
Before first use, fully charge the battery. The L35 uses a rechargeable lithium-ion battery that can be charged via the included USB cable.
- Remove the battery from the flashlight.
- Connect the USB charging cable to the battery and a suitable USB power source (e.g., computer, wall adapter).
- The battery's indicator light will show charging status (e.g., red for charging, green for fully charged).
- Once fully charged, disconnect the cable and reinsert the battery into the flashlight.
4. Operating Instructions
4.1 Power On/Off
- Side Switch: Press and hold the side switch for approximately 0.5 seconds to turn the flashlight ON or OFF.
- Tactical Tail Switch: Press the tactical tail switch for momentary ON (Turbo mode). Fully click for constant ON (Turbo mode). Click again to turn OFF.
4.2 Brightness Level Selection
When the flashlight is ON using the side switch:
- Press the side switch to cycle through brightness levels: Ultra-Low → Low → Mid → High.
- Double-click the side switch to activate Turbo mode.
- Triple-click the side switch to activate Strobe mode.
4.3 Lockout Function
To prevent accidental activation, the L35 features a lockout function:
- Activate Lockout: When the flashlight is OFF, press and hold the side switch for 3 seconds. The light will flash briefly to indicate lockout mode is engaged.
- Deactivate Lockout: Press and hold the side switch for 3 seconds. The light will flash briefly, and then turn on at the last used brightness level, indicating lockout mode is disengaged.
4.4 Power Indicator
The power indicator on the side switch displays the remaining battery power:
- Green Light: Battery power is sufficient.
- Red Light: Battery power is low, recharge soon.
- Flashing Red Light: Battery power is critically low, recharge immediately.
5. Maintenance
5.1 Cleaning
- Clean the flashlight body with a soft, damp cloth.
- Keep the threads and O-rings clean. Apply silicone grease periodically to the O-rings to maintain water resistance.
- Clean the lens with a lens cleaning cloth to ensure optimal light output.
5.2 Battery Care
- Recharge the battery regularly, especially if the flashlight is not used for extended periods.
- Store the flashlight and battery in a cool, dry place.
- If storing for a long time, remove the battery from the flashlight to prevent potential leakage.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Flashlight does not turn on | Low battery; Battery incorrectly installed; Tail cap loose; Lockout mode engaged | Charge battery; Reinstall battery with correct polarity; Tighten tail cap; Deactivate lockout mode |
| Light output is dim | Low battery; Dirty lens | Charge battery; Clean lens |
| Flashlight gets hot quickly | Operating in Turbo/High mode for extended periods | This is normal for high-lumen flashlights. Reduce brightness level or allow to cool. |
| Water ingress | Damaged O-rings; Tail cap not fully tightened | Replace O-rings; Ensure tail cap is securely tightened |
7. Specifications
| Feature | Detail |
|---|---|
| Model | ACEBEAM L35 |
| LED | CREE XHP70.3 LED |
| Maximum Output | 5000 Lumens |
| Maximum Beam Distance | 650 Meters |
| Power Source | Rechargeable Lithium-Ion Battery (Included) |
| Material | Aluminum Alloy |
| Water Resistance | IPX8 (5 meters submersible) |
| Impact Resistance | 1.5 Meters |
| Dimensions | 1"D x 2.13"W x 5.98"H |
| Weight | 0.83 Pounds (approximately 13.28 ounces) |
| Color Temperature | 6500 Kelvin |
8. Warranty and Support
ACEBEAM offers a 10-year warranty on the L35 Tactical Flashlight, covering manufacturing defects and workmanship. For warranty claims, technical support, or any inquiries, please contact ACEBEAM customer service.
You can find more information and support on the official ACEBEAM store: ACEBEAM Official Store
9. Safety Information
- Eye Safety: Do not shine the flashlight directly into eyes or at other people/animals. The high lumen output can cause temporary vision impairment or permanent eye damage.
- Heat: The flashlight may become hot during prolonged use, especially in Turbo or High modes. Handle with care to avoid burns.
- Battery Handling: Use only the recommended battery type. Do not mix old and new batteries or different types of batteries. Do not dispose of batteries in fire.
- Children: Keep out of reach of children.
- Disassembly: Do not attempt to disassemble the flashlight head or tail cap beyond what is necessary for battery installation/removal. This may damage the flashlight and void the warranty.
