COLAMY Wingback Upholstered Dining Chairs (Set of 6, Beige) Instruction Manual

Introduction

Thank you for choosing COLAMY Wingback Upholstered Dining Chairs. This manual provides essential information for the safe assembly, use, and maintenance of your new chairs. Please read it thoroughly before assembly and retain it for future reference.

Safety Information

Please observe the following safety precautions:

• Exercise caution when handling sharp edges during assembly.
• Always follow the assembly instructions precisely to ensure safe and stable use of the chairs.
• Do not exceed the maximum weight recommendation of 300 pounds per chair.
• Ensure all screws and fasteners are tightened securely before use and periodically check for looseness.

Package Contents

Verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact customer support.

• 6 x Upholstered Chair Seats (Part A)
• 12 x Front Legs (Part B)
• 12 x Rear Legs (Part C)
• 48 x M8*55mm Screws (Part D)
• 48 x Flat Washers (Part E)
• 48 x Lock Washers (Part F)
• 6 x Allen Wrenches (Part G)

Figure 1: Exploded view of chair components and hardware. This image shows one upholstered seat, two front legs, two rear legs, eight M8*55mm screws, eight flat washers, eight lock washers, and one Allen wrench, representing the components for a single chair.

Important Note: If you purchased a 3-piece set, your items may ship separately and arrive on different days. Please allow up to 7 business days for all packages to be delivered.

Setup and Assembly

Minor assembly is required. Follow these steps to assemble each chair:

1. Step 1: Unpack Components. Carefully remove all parts from the packaging. Locate the zippered compartment underneath the chair seat. Unzip it and remove the legs and hardware stored inside.
2. Step 2: Attach Legs. Align the front legs (Part B) and rear legs (Part C) with the corresponding pre-drilled holes on the underside of the chair seat (Part A).
3. Step 3: Secure Legs. Insert the M8*55mm screws (Part D) through the flat washers (Part E) and lock washers (Part F), then into the pre-drilled holes. Use the Allen wrench (Part G) to tighten all screws securely. Do not overtighten.
4. Step 4: Place Seat Cushion. Once all legs are securely attached, flip the chair upright. Place the seat cushion onto the chair.
5. Step 5: Final Check. Ensure all legs are stable and the chair does not wobble. Repeat for all chairs.

Operating Instructions

These chairs are designed for comfortable seating in various indoor environments.

• Placement: Suitable for dining rooms, kitchens, and living rooms.
• Comfort: The tufted back and thick foam cushion provide ergonomic support and comfort for extended periods.
• Mobility (if applicable): Some variants may include casters for easy movement. If your chairs have casters, they can be easily rolled. If not, they are designed as stationary chairs.

Figure 2: COLAMY Wingback Upholstered Dining Chairs in a dining room setting, showcasing their aesthetic and functional placement.

Maintenance

Proper care will extend the life and appearance of your chairs.

• Cleaning: Spot clean the fabric upholstery as needed. Use a mild detergent and a damp cloth. Avoid harsh chemicals.
• Frame Care: Wipe the wooden legs with a soft, dry cloth. Avoid abrasive cleaners.
• Regular Checks: Periodically check all screws and connections to ensure they remain tight. Tighten if necessary.
• Sunlight Exposure: Avoid prolonged exposure to direct sunlight to prevent fading of the fabric.

Troubleshooting

If you encounter any issues, refer to the following common solutions:

• Wobbling Chair: Ensure all leg screws are tightened evenly and securely. If the floor is uneven, consider using furniture pads or shims.
• Loose Legs: Re-tighten all screws connecting the legs to the chair seat.
• Stains on Fabric: For minor stains, spot clean immediately with a mild fabric cleaner and a clean cloth. Blot, do not rub.

Specifications

Figure 3: Detailed dimensions of the chair, including overall height (39.17"), seat width (22.44"), seat depth (17.52"), and seat height (20.08").

Figure 4: Key features of the chair, highlighting ergonomic support, solid wood legs, a 6.1" thickened seat cushion, and skin-friendly fabric.

Warranty and Support

COLAMY is committed to providing high-quality products. For any questions, concerns, or warranty inquiries, please contact COLAMY customer support through the retailer where the product was purchased. Please retain your proof of purchase for warranty claims.