Introduction
This manual provides essential instructions for the safe assembly, operation, and maintenance of your MERITLINE Twin Loft Bed with Stairs and Storage. Please read all instructions carefully before assembly and use to ensure proper function and safety.

Image: Overall view of the MERITLINE Twin Loft Bed, featuring a house-shaped frame, integrated stairs with storage drawers, and a slide. The bed is white and designed for a twin-sized mattress.
Safety Information
WARNING: Failure to follow these safety instructions could result in serious injury.
- Exercise caution around sharp edges during assembly and use.
- Do not exceed the maximum weight capacity of 175 lbs for the upper bed.
- Follow all assembly instructions precisely to prevent instability and ensure structural integrity.
- This loft bed is recommended for users over 6 years old.
- Ensure the mattress thickness for the upper bed is between 4-6 inches to maintain adequate guardrail height.
- Regularly check all bolts and connections to ensure they remain tight.
- Guardrails are provided for safety; ensure they are properly installed and maintained.
Setup and Assembly
The MERITLINE Twin Loft Bed requires assembly. An installation instruction manual is shipped with the product. Clear and logical illustrations are included to guide you through the assembly procedure.
- Unpacking: The product comes in 3 separate packages. Carefully unpack all components and verify against the parts list in the assembly manual.
- Assembly Options: The storage stairs can be installed on either the left or right side of the bed. The slide and the ladder are interchangeable, allowing you to customize the setup according to your preferences or room layout.
- Tools: Ensure you have the necessary tools as specified in the assembly manual.
- Step-by-Step Assembly: Follow the provided assembly instructions step-by-step. Do not overtighten bolts until instructed.
- Final Check: Once assembled, ensure all connections are secure and the bed is stable before use.

Image: Detailed diagram illustrating the dimensions of the MERITLINE Twin Loft Bed, including overall length, width, height, and specific measurements for the slide, stairs, and bed frame components.

Image: Front view of the MERITLINE Twin Loft Bed, showcasing the integrated slide on the left and the staircase with storage drawers on the right. The bed frame features a house-like structure.
Operating the Loft Bed
This loft bed is designed to provide a raised sleeping area with integrated features for convenience and space utilization.
- Sleeping Area: The upper bed accommodates a standard twin-size mattress. Ensure the mattress meets the recommended thickness of 4-6 inches.
- Stairs with Storage: The attached staircase provides access to the upper bed and includes two integrated drawers for storing clothing, bedding, or other items.
- Slide: The slide offers an alternative descent from the upper bed. Ensure the area around the slide exit is clear of obstructions.
- Under-Bed Space: The area beneath the loft bed can be utilized for various purposes, such as a play area, reading nook, or additional storage.

Image: Close-up view of the integrated staircase of the MERITLINE Twin Loft Bed, highlighting the two functional storage drawers built into the steps.

Image: Detailed view of the bed platform, showing the wooden slats that support the mattress and the protective guardrail surrounding the upper bed.
Maintenance
Proper maintenance will extend the life and ensure the safety of your MERITLINE Twin Loft Bed.
- Cleaning: Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners that may damage the wood finish.
- Hardware Check: Periodically inspect all bolts, screws, and connections. Re-tighten any loose hardware to maintain stability and prevent squeaking.
- Environmental Conditions: Avoid placing the bed in direct sunlight or near heat sources, which can cause wood to dry out or warp. Maintain a stable room temperature and humidity.
- Weight Distribution: Ensure weight is distributed evenly on the bed and storage drawers.
Troubleshooting
This section addresses common issues you might encounter with your loft bed.
- Instability or Wobbling: If the bed feels unstable, re-check all assembly connections. Ensure all bolts are securely tightened according to the assembly instructions.
- Squeaking Noises: Squeaking often indicates loose hardware. Locate the source of the noise and tighten the corresponding bolts. Applying a small amount of lubricant to metal-on-metal connections (if applicable) can also help.
- Drawers Sticking: Ensure the drawer slides are clean and free of debris. Check that the drawers are properly aligned within their tracks.
- Missing Parts: If you discover missing parts during assembly, refer to the contact information in the Warranty and Support section.
Specifications
| Feature | Detail |
|---|---|
| Product Type | Loft Bed |
| Size | Twin |
| Color | White |
| Overall Product Dimension | 94.2"L x 93.3"W x 84.4"H |
| Weight Capacity (Upper Bed) | 175 lbs |
| Overall Product Weight | 164 lbs |
| Number of Slats | 14 |
| Recommended Mattress Thickness (Upper Bed) | 4-6 inches |
| Recommended Age | > 6 years old |
| Product Material | Plywood + MDF + Pinewood |
| Box Spring Required | No |
| Assembly Required | Yes |
| Included Components | Drawer, Guardrails, Slats, Slide |
| Item Model Number | LT000130AA |
| UPC | 197793126397 |
| Country of Origin | Vietnam |
Warranty and Support
MERITLINE provides a ONE YEAR QUALITY GUARANTEE for this product. If you have any questions, concerns, or require assistance with assembly or parts, please contact customer support. We are committed to providing satisfactory service within 24 hours.
For support, please refer to the contact information provided with your purchase documentation or visit the official MERITLINE website.