Xuevcn M17

Xuevcn M17 Portable Bluetooth Speaker User Manual

Model: M17 | Brand: Xuevcn

Introduction

Welcome to the user manual for your new Xuevcn M17 Portable Bluetooth Speaker. This guide provides essential information for setting up, operating, and maintaining your device. Please read it carefully to ensure optimal performance and longevity of your speaker.

Product Overview

Package Contents

  • Xuevcn M17 Portable Bluetooth Speaker
  • Quick Start Guide

Key Features

  • True Wireless Stereo (TWS) Functionality
  • Colorful Flashing LED Lights
  • Built-in Microphone for Hands-Free Calls
  • Waterproof Design
  • Dual Bass Speakers for Enhanced Audio
  • Bluetooth Connectivity

Speaker Components

Xuevcn M17 Portable Bluetooth Speaker, black cylindrical design with speaker grille and control buttons.
Front view of the Xuevcn M17 Portable Bluetooth Speaker, showing the main speaker grille, control buttons on top, and passive radiators on the sides.

The Xuevcn M17 speaker features a cylindrical design with a durable fabric grille. Control buttons are typically located on the top panel, and passive radiators are present on both ends for enhanced bass. A charging port and auxiliary input are usually located under a protective flap to maintain its waterproof rating.

Setup

Charging the Speaker

Before first use, fully charge the speaker to ensure optimal battery performance.

  1. Connect the charging cable to the speaker's charging port.
  2. Connect the other end of the cable to a USB power adapter (not included) or a computer's USB port.
  3. The LED indicator will show charging status (e.g., red for charging, off when fully charged).

Powering On/Off

Press and hold the Power button (usually marked with a power symbol) for approximately 3 seconds to turn the speaker ON or OFF. A sound prompt will indicate the status.

Operating Instructions

Bluetooth Pairing

  1. Ensure the speaker is powered on and in Bluetooth pairing mode. The LED indicator will flash (e.g., blue) to show it's discoverable.
  2. On your device (smartphone, tablet, computer), enable Bluetooth and search for available devices.
  3. Select "Xuevcn M17" from the list of available devices.
  4. Once paired, the speaker will emit a confirmation sound, and the LED indicator will stop flashing and remain solid.
  5. If pairing fails, turn off the speaker and your device's Bluetooth, then repeat the steps.

True Wireless Stereo (TWS) Function

To achieve a stereo sound experience, you can pair two Xuevcn M17 speakers together.

  1. Ensure both speakers are powered on and not connected to any Bluetooth device.
  2. On one speaker, press and hold the TWS button (refer to your Quick Start Guide for specific button) for 2-3 seconds. It will search for another speaker.
  3. The two speakers will automatically pair with each other. A confirmation sound will indicate successful TWS pairing.
  4. Once TWS paired, connect your device to one of the speakers via Bluetooth as described in the "Bluetooth Pairing" section.

LED Light Functions

The speaker features colorful flashing lights to enhance your listening experience.

Press the Light button (refer to your Quick Start Guide for specific button) to cycle through different light modes or to turn the lights off.

Hands-Free Calling

When connected to a smartphone via Bluetooth, the built-in microphone allows for hands-free calls.

  • To answer an incoming call: Press the Play/Pause button once.
  • To end a call: Press the Play/Pause button once.
  • To reject an incoming call: Press and hold the Play/Pause button for 2 seconds.

Music Playback Controls

  • Play/Pause: Press the Play/Pause button once.
  • Next Track: Press and hold the Volume Up (+) button.
  • Previous Track: Press and hold the Volume Down (-) button.
  • Volume Up: Short press the Volume Up (+) button.
  • Volume Down: Short press the Volume Down (-) button.

Maintenance

  • Keep the speaker away from extreme temperatures, direct sunlight, and corrosive liquids.
  • Clean the speaker with a soft, dry cloth. Do not use abrasive cleaners.
  • Ensure the charging port cover is securely closed when not charging to maintain its waterproof rating.
  • If not used for extended periods, charge the speaker at least once every three months to preserve battery life.

Troubleshooting

ProblemSolution
Speaker does not power on.Ensure the battery is charged. Connect to a power source and try again.
Cannot pair via Bluetooth.Ensure the speaker is in pairing mode. Turn off and on Bluetooth on your device. Move speaker closer to your device.
No sound or low volume.Check volume levels on both the speaker and your connected device. Ensure the speaker is properly paired.
TWS pairing fails.Ensure both speakers are fully charged and not connected to any other Bluetooth device. Try resetting both speakers.
LED lights are not working.Press the light control button to cycle through modes or turn them on.

Specifications

FeatureDetail
Model NameM17
BrandXuevcn
Speaker TypeSoundbar
Connectivity TechnologyBluetooth
Speaker Maximum Output Power5 Watts
Product Dimensions2"D x 2"W x 2"H
Item Weight1.52 pounds
Batteries2 A batteries required (included)
Included ComponentsQuick Start Guide

Warranty and Support

For warranty information and customer support, please refer to the Quick Start Guide included with your product or visit the official Xuevcn website. Keep your purchase receipt for warranty claims.

© 2025 Xuevcn. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.