BEYOU 10.7 Cu. Ft. Commercial Upright Freezer (Model XB-XF-400)

1. Introduction

Thank you for choosing the BEYOU 10.7 Cu. Ft. Commercial Upright Freezer. This manual provides essential information for the safe and efficient operation, installation, and maintenance of your new appliance. Please read these instructions thoroughly before use and retain them for future reference.

This commercial upright freezer is designed for optimal frozen food storage, featuring a generous 10.7 cubic feet capacity, precise temperature control, and a durable design suitable for various commercial environments.

Figure 1: BEYOU Commercial Upright Freezer with key dimensions and suggested usage environments.

2. Safety Information

WARNING: To reduce the risk of fire, electric shock, or injury, follow these basic precautions:

• Read all instructions before using the freezer.
• Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
• Ensure the freezer is properly grounded.
• Unplug the freezer before cleaning or performing any maintenance.
• Keep ventilation openings clear of obstruction.
• Do not damage the refrigerant circuit.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.

3. Package Contents

Verify that all items are included in your package:

• BEYOU 10.7 Cu. Ft. Commercial Upright Freezer Unit
• Door Handle(s)
• Installation Hardware (screws, washers, etc.)
• Wire Shelves (7 fixed-position)
• Mesh Basket (1 customized large capacity)
• Keys for Door Lock
• Instruction Manual (this document)

4. Setup

4.1 Unpacking

Carefully remove all packaging materials, including foam and adhesive tape. Inspect the freezer for any damage during transit. Keep packaging materials out of reach of children.

4.2 Placement

• Place the freezer on a firm, level floor capable of supporting its weight when fully loaded.
• Ensure adequate ventilation around the unit. Allow at least 4 inches (10 cm) of space on the sides and back, and 12 inches (30 cm) on top for proper air circulation.
• Avoid direct sunlight or placing the freezer near heat sources such as stoves, heaters, or radiators.
• Do not install in areas where the temperature is likely to drop below 50°F (10°C) or rise above 90°F (32°C).

4.3 Handle Installation

The door handle needs to be installed by yourself. Follow these steps:

1. Locate the pre-drilled holes on the freezer door.
2. Align the handle brackets with the holes.
3. Secure the handle to the door using the provided screws and a screwdriver. Ensure it is firmly attached.
4. For models with a top hinge cover that needs to be removed and reattached, carefully detach it, connect any necessary wiring (if applicable, as shown in the video), and then re-secure the cover after the handle is installed.

Video 1: Detailed instructions for installing the freezer door handle, including wiring connections for the top hinge cover.

4.4 Leveling the Freezer

Your freezer is equipped with rear roller wheels for easy movement and adjustable leveling feet at the front. To level the freezer:

• Move the freezer to its final location.
• Turn the leveling feet clockwise to raise the freezer or counter-clockwise to lower it.
• Use a level to ensure the freezer is perfectly level from front to back and side to side. Proper leveling is crucial for efficient operation and to prevent the door from swinging open or closing improperly.

4.5 Initial Power-On

After placing and leveling the freezer, wait at least 2-4 hours before plugging it into a power outlet. This allows the refrigerant to settle, preventing potential damage to the cooling system.

5. Operating Instructions

5.1 Temperature Control

The freezer features a digital LED display for precise temperature control. The recommended temperature range for optimal frozen food storage is -13°F to -0.4°F (-25°C to -18°C).

• Use the control panel to set your desired temperature. Refer to the specific controls on your unit for adjustment buttons (e.g., SET, UP, DOWN).
• The digital display will show the current internal temperature.

Figure 2: Digital temperature control panel and interior features.

5.2 Food Storage

The freezer is equipped with 7 fixed-position wire shelves and 1 customized large capacity mesh basket to optimize storage space and allow for easy access to items.

• Arrange food items to allow for proper air circulation, which helps maintain consistent temperatures.
• Utilize the mesh basket for frequently accessed items or those that benefit from being easily removable.
• The quick-freezing function helps rapidly freeze fresh items, preserving their quality.

Figure 3: Interior organization with wire shelves and LED lighting.

5.3 Door Features

The freezer features a solid hinged door with a lock to secure contents. Always ensure the door is properly closed to maintain internal temperature and energy efficiency.

Figure 4: Key features including the solid door and stainless steel handle.

6. Maintenance

6.1 Manual Defrost

This freezer features manual defrost. Frost buildup can reduce cooling efficiency. Defrost the unit when frost on the interior walls reaches approximately 1/4 inch (6 mm) thick.

1. Unplug the freezer from the power outlet.
2. Remove all food items and store them in another freezer or cooler.
3. Leave the freezer door open to allow frost to melt naturally. You can place towels at the bottom to absorb water.
4. Once all frost has melted, clean and dry the interior thoroughly.
5. Plug the freezer back in and allow it to cool down before returning food items.

6.2 Cleaning

• Always unplug the freezer before cleaning.
• Clean the interior with a solution of mild soap and warm water. Rinse thoroughly and dry completely.
• Wipe the exterior with a soft cloth and mild detergent. Avoid abrasive cleaners or solvents.
• Periodically clean the condenser coils at the back of the unit with a soft brush or vacuum cleaner to ensure efficient operation.

7. Troubleshooting

Before contacting customer service, check the following common issues and solutions:

8. Specifications

9. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or contact the manufacturer directly. Keep your purchase receipt as proof of purchase for warranty claims.

Manufacturer: ZHEJIANG XINGXING REFRIGERATION CO.,LTD.