AdHoc Moro Manual Ceramic Coffee Grinder Instruction Manual

About Your AdHoc Moro Coffee Grinder

The AdHoc Moro Coffee Grinder is designed for enthusiasts of freshly brewed coffee. It features a durable CeraCutXL ceramic grinder mechanism, engineered to preserve the rich aroma of coffee beans while delivering a consistent grind. This manual grinder is an essential accessory for home brewing, suitable for various coffee preparations including espresso and French press.

Key Features:

• Durable CeraCutXL Ceramic Grinder: Ensures efficient and aroma-friendly grinding.
• Adjustable Grinding Mechanism: Allows for continuous adjustment from espresso-fine to coarse for French press.
• Odorless and Tasteless Ceramic: Maintains the natural essence and flavor of your coffee beans.
• Compact Design: Easy to store and handle for daily use.

Setup Instructions

1. Unpack Components: Carefully remove all parts from the packaging. You should have the main grinder body, the handle, and the ground coffee container.
2. Assemble the Handle: Place the handle onto the top shaft of the grinder body. Ensure it is securely fitted.
3. Adjust Grind Coarseness: The grind adjustment mechanism is located at the bottom of the grinder, inside the ground coffee container. Turn the dial clockwise for a finer grind and counter-clockwise for a coarser grind. Experiment to find your preferred setting for your brewing method.

Image: The AdHoc Moro Coffee Grinder with its handle attached, demonstrating its assembled state.

Operating Your Coffee Grinder

1. Add Coffee Beans: Remove the top cover and pour your desired amount of whole coffee beans into the bean hopper. Replace the top cover securely.
2. Begin Grinding: Hold the grinder body firmly with one hand and turn the handle clockwise with the other. Continue turning until all beans have been ground.
3. Collect Ground Coffee: Unscrew the bottom container to access your freshly ground coffee.

Image: The AdHoc Moro Coffee Grinder positioned beside whole coffee beans, illustrating the input for grinding.

Image: The AdHoc Moro Coffee Grinder displaying ground coffee collected in its transparent bottom container.

Care and Maintenance

• Hand Wash Only: The grinder should be hand washed. Do not immerse the grinding mechanism in water.
• Cleaning the Ceramic Burrs: To clean the ceramic grinding mechanism, it is recommended to grind a small amount of uncooked rice. This helps to dislodge any residual coffee oils and particles.
• Drying: Ensure all parts are completely dry before reassembling and storing.

Troubleshooting

• Grinder is difficult to turn: Check if the grind setting is too fine for the beans being used, or if there is a blockage. Adjust to a coarser setting or clear any obstructions.
• Inconsistent grind: Ensure the adjustment dial is securely set and has not shifted during grinding. Verify that the ceramic burrs are clean and free from residue.

Product Specifications

Warranty and Support

For warranty information or technical support, please refer to the product packaging or contact AdHoc customer service directly. Contact details can typically be found on the manufacturer's official website or included documentation.