1. Introduction
The Aiper Pilot X1 is a cordless handheld pool vacuum designed for efficient cleaning of both inground and above-ground pools, as well as spas and hot tubs. It features powerful suction, dual cleaning modes for varying water depths, and an extended reach telescoping pole for comprehensive cleaning. This manual provides essential information for the setup, operation, and maintenance of your Pilot X1 pool vacuum.
2. What's in the Box

Image: All components included in the Aiper Pilot X1 packaging.
- 1x Pool Vacuum Unit
- 1x Extension Pole (Telescoping)
- 1x Charger
- 1x Wall-Mounted Holder
- 2x Filter Sleeves (Consumables)
- 1x User Manual
3. Setup
- Assembly: Attach the vacuum head to the main unit. Connect the telescoping pole to the main unit. Ensure all connections are secure.
- Initial Charge: Before first use, fully charge the Aiper Pilot X1. The charging time is approximately 2.5 hours. Ensure the charging port is dry before connecting the charger.
- Filter Installation: Insert the appropriate filter sleeve into the filter basket. The manual includes two filter options: a 360um filter screen for larger debris and a 100um filter sleeve for fine particles.
4. Operating Instructions
4.1 Power and Suction
The Aiper Pilot X1 features a powerful 1260 GPH (21 GPM) suction for effective debris removal. It operates on a cordless, battery-powered design, allowing unrestricted movement.

Image: Visual representation of the powerful suction capability of the Pilot X1.
4.2 Dual Cleaning Modes
The vacuum offers dual cleaning modes to adapt to different pool areas:
- Deep Mode (>20 inches): Suitable for spas, inground/above-ground pools, and corners.
- Shallow Mode (≥0.6 feet): Ideal for pool steps, lounging areas, and hot tubs.

Image: The Pilot X1 demonstrating its ability to clean shallow water areas, including pool corners, walls, steps, and elevated platforms.
4.3 Telescoping Pole
The included telescoping pole extends up to 2.5m (8.3 ft), providing easy access to pool floors, walls, and hard-to-reach areas without excessive bending.

Image: A person using the telescoping pole to clean a pool with the Aiper Pilot X1, illustrating its extended reach.
4.4 One-Click Activation & LED Indicator
The device features one-click activation. A 3-color LED indicator provides status updates:
- Blue: Deep Water Mode
- Green: Shallow Water Mode
- Red: Low Battery
5. Maintenance
5.1 Filter Cleaning
To maintain optimal performance and prevent clogging, empty the debris from the filter basket and rinse it with water after each use. The manual includes two filter options for different pool conditions: a 360um filter screen for larger debris (small twigs, coarse sand, leaves, debris) and a 100um filter sleeve for small/less noticeable debris (fine sand, dust, fine particles).

Image: Illustration of the two filter types and their recommended use based on debris size.

Image: A hand rinsing the filter basket under running water, demonstrating easy maintenance.
5.2 Storage
After cleaning, store the unit in a dry, shaded area. The included wall-mounted holder provides convenient storage. Ensure the charging port is completely dry before charging or storing.

Image: The Aiper Pilot X1 being stored on its wall-mounted holder, indicating convenient storage and charging.
6. Troubleshooting
If you encounter any issues with your Aiper Pilot X1, please refer to the following general troubleshooting tips:
- No Power: Ensure the unit is fully charged. Check the charger connection and power outlet.
- Weak Suction: Clean the filter basket and filter sleeves thoroughly. Check for any blockages in the vacuum head or suction path.
- Unit Not Moving: Ensure the unit is properly assembled and submerged in water. Check for any debris obstructing the movement mechanism.
- Short Battery Life: Ensure the unit is fully charged before each use. Battery performance may decrease over time with prolonged use.
For persistent issues or further assistance, please contact Aiper customer support.
7. Specifications
| Feature | Specification |
|---|---|
| Brand | AIPER |
| Model Name | Pilot X1 |
| Item Model Number | HAH3 |
| Power Source | Battery Powered |
| Suction Power | 21 GPM (1260 GPH) |
| Charging Time | 2.5 Hours |
| Battery Type | 1 Lithium Ion battery (included) |
| Battery Weight | 215 Grams |
| Lithium Battery Energy Content | 28.08 Watt Hours |
| Telescoping Pole Length | Up to 8.3 ft (2.5m) |
| Item Weight | 7 Pounds |
| Product Dimensions | 8.6"L x 8.6"W x 59"H |
| Material | ABS Plastic |
| Color | Dark Grey |
| Control Method | Touch |
| Assembly Required | Yes |
| Warranty Type | Limited |
8. Warranty and Support
The Aiper Pilot X1 comes with a Limited Warranty. For detailed warranty information, claims, or technical support, please refer to the official Aiper website or contact AiperDirect, the seller, directly. Keep your purchase receipt for warranty validation.
Aiper Brand Store: Visit the AIPER Store on Amazon







