Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your Jocoevol 47"-63" Extendable Round Dining Table. Please read all instructions carefully before beginning assembly and retain this manual for future reference. Proper assembly and care will ensure the longevity and optimal performance of your dining table.
Safety Information
- Always assemble the table on a soft, clean surface to prevent scratches.
- Ensure all screws and fasteners are securely tightened before use. Periodically check and re-tighten as necessary.
- Do not stand or sit on the table.
- Keep small parts away from children during assembly to avoid choking hazards.
- Use caution when extending or retracting the table to prevent pinching fingers.
- Do not place excessively hot items directly on the table surface without protection.
Package Contents
Verify that all components and hardware are present before beginning assembly. If any parts are missing or damaged, please contact customer support.
Image: The Jocoevol Extendable Dining Table with its central storage compartment open, showcasing its design and functionality.
Components List
Refer to the assembly diagram for visual identification of parts.
Image: Detailed assembly diagram illustrating all numbered components and hardware required for the Jocoevol dining table.
Setup: Assembly Instructions
Follow these steps carefully for proper assembly. It is recommended to have two people for certain steps.
- Step 1: Assemble the Base Frame. Begin by connecting the base frame components as shown in the diagram. Ensure all dowels and screws are aligned and secured.
- Step 2: Attach the Base Plate. Secure the bottom circular base plate to the assembled base frame using the designated screws.
- Step 3: Construct the Central Storage Unit. Assemble the inner shelves and side panels of the central storage unit.
- Step 4: Install Storage Doors. Attach the sliding doors to the central storage unit, ensuring they glide smoothly.
- Step 5: Prepare the Tabletop Mechanism. Attach the sliding rails to the underside of the main tabletop sections. Ensure they are securely fastened and aligned for smooth extension.
- Step 6: Connect Tabletop to Base. Carefully place the assembled tabletop onto the central base, aligning the pre-drilled holes and securing it with the provided fasteners.
- Step 7: Insert Extension Leaves. Place the extension leaves into the central opening of the tabletop. These leaves are designed to fold and store within the table's mechanism when not in use.
Operating Instructions
Extending the Table
- Unlock any securing clips or latches on the underside of the tabletop.
- Gently pull the two halves of the tabletop apart. The sliding mechanism will extend.
- Retrieve the extension leaves from the central storage compartment.
- Place the extension leaves into the gap created by pulling the table halves apart. Ensure they sit flush and are properly aligned.
- Push the tabletop halves back together until they meet the extension leaves and lock into place. Secure any clips or latches.
Image: Visual representation of the table's extension mechanism, illustrating how it expands from 47 inches to 63 inches.
Retracting the Table
- Unlock any securing clips or latches.
- Gently pull the tabletop halves apart to create a gap.
- Remove the extension leaves and store them in the central compartment.
- Push the tabletop halves back together until they meet, ensuring a tight seam. Secure any clips or latches.
Using the 2-Tier Storage Shelf
The central pedestal features a discreet 2-tier storage shelf. Simply slide open the curved doors to access the compartments. The shelf can be adjusted to different heights to accommodate various items.
Image: A detailed view of the table's central pedestal, showing the two-tier storage shelf with its doors open, suitable for storing various items.
Maintenance
- Cleaning: Wipe the table surface with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners. Dry immediately with a clean cloth.
- Spills: Clean spills immediately to prevent staining, especially on the wood finish.
- Heat Protection: Always use coasters or placemats for hot dishes to protect the tabletop from heat damage.
- Sunlight Exposure: Avoid prolonged direct sunlight exposure to prevent fading or warping of the wood finish.
- Humidity: Maintain a stable humidity level in the room to prevent wood expansion or contraction.
Troubleshooting
| Issue | Possible Cause | Solution |
|---|---|---|
| Table is wobbly | Loose fasteners; uneven floor. | Check and tighten all screws. Use furniture glides or shims to level the table on uneven surfaces. |
| Tabletop difficult to extend/retract | Rails are dirty or misaligned; securing clips engaged. | Ensure all securing clips are disengaged. Clean the sliding rails and apply a silicone-based lubricant if necessary. Check for obstructions. |
| Storage doors do not slide smoothly | Debris in tracks; misaligned doors. | Clean the tracks of any dust or debris. Ensure the doors are properly seated in their tracks. |
Specifications
| Feature | Detail |
|---|---|
| Brand | Jocoevol |
| Model Number | B0FDG9MVV7 |
| Dimensions (Unextended) | 47"W x 30"H (Round) |
| Dimensions (Extended) | 63"D x 47"W x 30"H (Oval) |
| Seating Capacity (Unextended) | 4-6 people |
| Seating Capacity (Extended) | 6-8 people |
| Material | Engineered Wood (MDF) |
| Color | Brown |
| Weight | 80 Pounds |
| Storage | 2-Tier Central Shelf |
Warranty & Support
For warranty information or technical support, please contact Jocoevol customer service. Refer to your purchase documentation for specific warranty terms and contact details. If you encounter any issues during assembly or use, please reach out to us directly for assistance.
Contact: Please email us with any questions, and we'll respond within 24 hours.
