1. Introduction
This manual provides detailed instructions for the installation, setup, and operation of your Hornbill M8 WiFi Smart Lock. Please read this manual thoroughly before installation and retain it for future reference.
Video: Overview of the Hornbill M8 Wi-Fi Smart Lock, highlighting its features and design.
2. What's in the Box
The Hornbill M8 WiFi Smart Lock package includes the following components:
- Deadbolt
- Smart Front Panel (Exterior Lock)
- Mounting Plate
- Back Panel (Interior Lock)
- Screws & Keys & Keyfobs
- User Manual
- Door Template
Image: All components of the Hornbill M8 WiFi Smart Lock, including the exterior keypad, interior unit, keys, and a smartphone displaying the control app.
3. Measurements and Preparations
Before installation, ensure your door meets the following specifications:
- Door Thickness: 1-3/8" to 2-1/8" (35mm to 55mm)
- Backset: 2-3/8" or 2-3/4" (60mm or 70mm)
- Hole Diameter: 1-1/2" or 2-1/8" (38mm or 54mm)
- Minimum Distance between holes: 5" (127mm)
The lock is compatible with most standard US & CA deadbolts. No extra drilling is required if your door is already prepared for a standard deadbolt. Ensure your door has a latch hole and uses a single cylinder lock. It is not compatible with mortise or integrated lock types.
Image: Detailed diagram illustrating door thickness, backset, hole diameter, and minimum distance requirements for installation.
4. Installation
Follow these steps to install your Hornbill M8 WiFi Smart Lock:
4.1 Adjust and Install the Deadbolt
- Ensure the
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.