VOOPOO Argus Klyc Kit User Manual

1. Product Overview

The VOOPOO Argus Klyc Kit is a compact and stylish pod system designed for both Mouth-to-Lung (MTL) and Restricted Direct-to-Lung (RDL) vaping. It features a built-in 1350mAh battery, offering up to 30W of adjustable power output. The device incorporates precise airflow adjustment and adaptive power for a customized vaping experience. Equipped with iCOSM CODE 2.0 flavor technology, it ensures a clean and consistent taste. A magnetic protective cap is included to maintain hygiene and prevent dust intrusion.

Image: The VOOPOO Argus Klyc Kit, showcasing its sleek design and magnetic protective cap.

Key Features:

• Magnetic Protective Cap: Ensures hygiene and prevents dust from entering the mouthpiece.
• Adjustable Airflow: Customize your draw from loose to tight for various vaping preferences.
• 1350mAh Built-in Battery: Provides long-lasting vaping sessions with approximately 40-minute Type-C fast charging.
• 5-30W Variable Output: Supports both MTL and RDL vaping styles, compatible with all Argus replaceable pods.
• iCOSM CODE 2.0 Flavor Technology: Delivers a clean and stable flavor experience over extended use.
• RGB Indicator Light: Clearly displays battery level (Red ≤20%, White >20%) and device status.

2. What's in the Box

Upon unboxing your VOOPOO Argus Klyc Kit, you will find the following components:

• 1 x ARGUS Klyc Device
• 1 x ARGUS Top Fill Cartridge V2 0.7Ω (3mL capacity)
• 1 x Type-C USB Cable
• 1 x User Manual
• 1 x ARGUS Pod Family Compatibility Guide

Image: All items included in the VOOPOO Argus Klyc Kit package.

3. Setup

3.1. Install the Pod

1. Remove the magnetic protective cap from the device.
2. Insert the ARGUS Top Fill Cartridge V2 into the device. It will securely attach magnetically.

Image: The Argus Klyc device with the pod cartridge securely installed.

3.2. Fill with E-liquid

1. Locate the top-fill port on the ARGUS Top Fill Cartridge V2.
2. Open the silicone plug.
3. Carefully fill the pod with your desired e-liquid through the filling port. Avoid overfilling.
4. Close the silicone plug firmly to prevent leaks.
5. After filling, wait at least 5-10 minutes before first use to allow the coil to saturate with e-liquid. This prevents dry hits and extends coil life.

3.3. Charging the Device

1. Connect the provided Type-C USB cable to the charging port on the device.
2. Connect the other end of the cable to a suitable USB power source (e.g., wall adapter, computer USB port).
3. The RGB indicator light will show the charging status. A full charge typically takes approximately 40 minutes.

4. Operating Instructions

4.1. Power On/Off

The Argus Klyc Kit is an auto-draw device, meaning it activates automatically when you inhale. There is no manual power button for turning the device on or off.

4.2. Vaping

Simply inhale from the mouthpiece to activate the device and begin vaping. The device will automatically adjust the power output based on the pod's resistance and your draw strength.

4.3. Airflow Adjustment

The device features a side-mounted airflow adjustment slider. Move the slider to increase or decrease the airflow to achieve your preferred draw tightness.

4.4. Indicator Light Meanings

The RGB indicator light provides visual feedback on the device's status:

• White Light: Battery level is above 20%.
• Red Light: Battery level is 20% or below, indicating a need for charging.
• Charging: The light will indicate charging status and turn off when fully charged.
• Pod Insertion: Light may briefly illuminate upon successful pod insertion.
• Vaping: The light will illuminate during a puff, with color variations indicating power output levels (Low, Mid, High).

Image: The Argus Klyc device showing the indicator light during operation.

5. Maintenance

5.1. Cleaning the Device

• Regularly wipe the device with a soft, dry cloth to remove dust and fingerprints.
• Clean the pod connection area on the device and the bottom of the pod with a cotton swab to ensure good contact.
• Use the magnetic protective cap when not in use to keep the mouthpiece clean.

5.2. Replacing the Pod

The ARGUS Top Fill Cartridge V2 has a built-in coil. When the e-liquid flavor diminishes or a burnt taste occurs, it indicates that the coil needs replacement. Replace the entire pod cartridge with a new one.

1. Remove the old pod from the device.
2. Dispose of the old pod responsibly.
3. Insert a new, filled ARGUS Top Fill Cartridge V2 into the device.

6. Troubleshooting

• No Vapor Production:
  • Check if the battery is charged.
  • Ensure the pod is correctly inserted and making contact.
  • Verify the pod contains e-liquid.
  • Replace the pod if the coil is burnt or old.
• Leaking:
  • Ensure the silicone plug on the top-fill port is securely closed.
  • Avoid overfilling the pod.
  • Check for condensation in the pod connection area and clean if necessary.
  • If leaking persists, replace the pod.
• Device Not Charging:
  • Ensure the Type-C cable is properly connected to both the device and the power source.
  • Try a different charging cable or power adapter.
  • Clean the charging port on the device.

7. Specifications

Image: Visual representation of the Argus Klyc Kit's dimensions and pod specifications.

8. Warranty and Support

For warranty information and customer support, please refer to the official VOOPOO website or contact your retailer. Keep your purchase receipt as proof of purchase for any warranty claims.