STF Allure

STF Allure 8-inch Wireless Speaker Instruction Manual

Model: Allure (ST-S12094)

1. Introduction

Thank you for purchasing the STF Allure 8-inch Wireless Speaker. This portable speaker is designed to deliver powerful audio with versatile connectivity options and dynamic RGB LED lighting. Please read this manual carefully to ensure proper use and to maximize your listening experience.

STF Allure 8-inch Wireless Speaker, front view with colorful RGB lights active.

Image: Front view of the STF Allure 8-inch Wireless Speaker, showcasing its integrated RGB LED lights.

2. Safety Information

  • Do not expose the speaker to water, moisture, or extreme temperatures.
  • Avoid dropping or subjecting the speaker to strong impacts.
  • Do not attempt to disassemble or repair the speaker yourself. Contact qualified service personnel.
  • Keep the speaker away from heat sources and direct sunlight.
  • Use only the provided charging cable and adapter.
  • Do not operate the speaker at excessively high volumes for prolonged periods to prevent hearing damage.

3. Package Contents

Ensure all items are present in the package:

  • STF Allure 8-inch Wireless Speaker
  • USB Type-C Charging Cable
  • User Manual
STF Allure 8-inch Wireless Speaker packaging box.

Image: The STF Allure 8-inch Wireless Speaker in its retail packaging.

4. Setup

4.1 Charging the Speaker

  1. Connect the USB Type-C charging cable to the speaker's charging port.
  2. Connect the other end of the cable to a compatible USB power adapter (not included) or a computer's USB port.
  3. The charging indicator light will illuminate. A full charge takes approximately 4 hours.
  4. Once fully charged, the indicator light may change or turn off. Disconnect the charging cable.

A full charge provides up to 3 hours of continuous playback.

4.2 Powering On/Off

  • To power on: Press and hold the Power button until the speaker activates.
  • To power off: Press and hold the Power button until the speaker deactivates.

4.3 Bluetooth Pairing

  1. Ensure the speaker is powered on and in Bluetooth mode (indicated by a specific light or voice prompt). If not, press the Mode button to switch to Bluetooth.
  2. Enable Bluetooth on your mobile device (smartphone, tablet, etc.).
  3. Search for available Bluetooth devices. Select "STF Allure" from the list.
  4. Once paired, the speaker will indicate a successful connection (e.g., a sound or light change).
  5. The speaker has a Bluetooth range of up to 10 meters (33 feet).

4.4 Connecting via USB / Micro SD / Auxiliary

Side view of STF Allure speaker showing control panel and input ports.

Image: Side view of the STF Allure speaker, highlighting the control panel and various input ports.

  • USB: Insert a USB flash drive (up to 64GB) into the USB port. The speaker will automatically switch to USB mode and begin playback.
  • Micro SD: Insert a Micro SD card (up to 64GB) into the Micro SD slot. The speaker will automatically switch to Micro SD mode and begin playback.
  • Auxiliary (3.5mm): Connect an external audio device using a 3.5mm audio cable (not included) to the AUX IN port. Press the Mode button to switch to AUX mode.
  • Microphone (6.3mm): Connect a microphone to one of the two 6.3mm microphone input jacks for karaoke or public address.

4.5 True Wireless Stereo (TWS) Pairing

The TWS function allows you to connect two STF Allure speakers for a stereo sound experience.

  1. Ensure both STF Allure speakers are powered on and in Bluetooth mode.
  2. On one of the speakers (this will be the primary speaker), press and hold the TWS button (if available, or a specific pairing button as per product design).
  3. The primary speaker will search for the secondary speaker. Once connected, both speakers will emit a confirmation sound.
  4. Now, connect your mobile device to the primary speaker via Bluetooth as described in section 4.3.
  5. Audio will now play in stereo through both speakers.

5. Operating Instructions

5.1 Basic Controls

  • Power Button: Press and hold to turn on/off.
  • Mode Button: Press to switch between Bluetooth, USB, Micro SD, AUX, and FM radio modes.
  • Play/Pause Button: Press to play or pause audio.
  • Volume Up/Next Track: Press briefly to increase volume. Press and hold to skip to the next track.
  • Volume Down/Previous Track: Press briefly to decrease volume. Press and hold to go to the previous track.
  • EQ Button: Press to cycle through equalizer presets (if available).

5.2 FM Radio Operation

  1. Switch the speaker to FM radio mode using the Mode button.
  2. Press the Play/Pause button to automatically scan and save available FM stations.
  3. Use the Next Track and Previous Track buttons to navigate between saved stations.

5.3 RGB LED Lights

The speaker features integrated RGB LED lights that enhance the audio experience. The lights typically synchronize with the music or can be set to various patterns. Refer to the specific controls on your speaker for light mode adjustments (e.g., a dedicated light button or a function within the Mode button cycle).

6. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the speaker's exterior. Do not use abrasive cleaners or solvents.
  • Storage: Store the speaker in a cool, dry place away from direct sunlight and extreme temperatures when not in use for extended periods.
  • Battery Care: To prolong battery life, fully charge the speaker before first use and recharge it at least once every three months if not used regularly.

7. Troubleshooting

ProblemPossible CauseSolution
No powerBattery is depleted.Charge the speaker for at least 4 hours.
No soundVolume is too low; incorrect mode selected; device not paired.Increase volume; press Mode button to select correct input; re-pair Bluetooth device.
Bluetooth connection unstableDevice is out of range; interference.Move device closer to the speaker (within 10m); avoid obstacles.
Microphone not workingMicrophone not properly connected; volume too low.Ensure microphone is fully plugged into the 6.3mm jack; adjust microphone volume.

8. Specifications

  • Model: Allure (ST-S12094)
  • Brand: STF
  • Speaker Size: 8 inches
  • Output Wattage: 40 Watts
  • Sound Pressure Level (SPL): 85 dB
  • Bluetooth Version: 5.3
  • Bluetooth Range: Up to 10 meters
  • Battery Capacity: 3000 mAh
  • Playback Time: Up to 3 hours
  • Charging Time: Approximately 4 hours
  • Charging Port: USB Type-C
  • Connectivity: Bluetooth, USB, Micro SD, AUX IN (3.5mm), Microphone Input (2x 6.3mm), FM Radio
  • Memory Card Support: Up to 64 GB (Micro SD)
  • Special Features: RGB LED Lights, True Wireless Stereo (TWS) Function
Back view of STF Allure speaker showing the product label and bass port.

Image: Rear view of the STF Allure speaker, displaying the product label and bass reflex port.

9. Warranty and Support

The STF Allure 8-inch Wireless Speaker comes with a manufacturer's warranty. Please refer to the warranty card included in your package or visit the official STF website for detailed warranty terms and conditions. For technical support, troubleshooting assistance, or service inquiries, please contact STF customer support through their official channels.

STF Official Website: Visit STF Store on Amazon

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.