YETI Rambler Stackable Cup Instruction Manual

1. Product Overview

The YETI Rambler 10 oz. Stackable Cup is designed for durability and thermal performance. It features top-to-bottom insulation to maintain beverage temperature. The interior is coated with DuraSip Ceramic Lining for easy cleaning and resistance to staining. Its design allows for efficient storage by nesting multiple cups.

Key Features:

• DuraSip Ceramic Lining: A nonstick, easy-to-clean interior that resists staining from acidic beverages.
• 18/8 Stainless Steel: Constructed from kitchen-grade stainless steel for puncture and rust resistance.
• Double-Wall Vacuum Insulation: Engineered to keep cold drinks cold and hot drinks hot for extended periods.
• 360-Degree Welded Handle: Provides a secure grip and enhanced durability.
• Cupholder Compatible: Designed to fit in most standard cupholders.
• MagSlider Lid: A splash-resistant lid for on-the-go use. Note: The MagSlider Lid is not leakproof.
• Stackable Design: Mugs nest together for convenient storage.

This diagram highlights the key features of the YETI Rambler Stackable Cup, including its DuraSip ceramic lining, easy-grip handle, and stackable design. It also notes the double-wall vacuum insulation, rust and puncture resistance, and dishwasher-safe properties.

2. First Use and Setup

Before initial use, wash all components of your YETI Rambler Stackable Cup, including the cup and MagSlider Lid, with warm, soapy water. Rinse thoroughly and allow to air dry. This ensures cleanliness and removes any manufacturing residues.

The YETI Rambler Stackable Cup with its MagSlider Lid, ready for use after initial cleaning.

3. Operating Instructions

Filling the Cup:

Remove the MagSlider Lid by gently pulling it upwards. Pour your desired hot or cold beverage into the cup. Do not overfill; leave sufficient space for the lid to be securely placed without spillage.

Using the MagSlider Lid:

• To open the drinking spout, slide the magnetic slider component to expose the opening.
• To close the drinking spout, slide the magnetic slider component back to cover the opening.
• The MagSlider Lid is designed to be splash-resistant, reducing splashes and spills. It is not leakproof and will not prevent spills if the cup is inverted.

Stacking Cups:

For convenient storage, multiple YETI Rambler Stackable Cups are designed to nest perfectly one inside another. Ensure lids are removed before stacking.

The stackable design of the YETI Rambler cups allows for efficient storage.

4. Maintenance and Care

Cleaning the Cup:

The YETI Rambler Stackable Cup is dishwasher safe. For best results, place the cup on the top rack of your dishwasher. Alternatively, wash by hand with warm, soapy water and a non-abrasive sponge or brush.

Cleaning the DuraSip Ceramic Lining:

The DuraSip Ceramic Lining is designed for easy cleaning. For stubborn stains, a mixture of baking soda and water can be used as a gentle abrasive. Rinse thoroughly after cleaning.

A detailed view of the DuraSip ceramic lining, which is easy to clean and resists staining.

Cleaning the MagSlider Lid:

The MagSlider component can be easily removed from the lid for thorough cleaning. Simply push the slider up and off the lid. Wash both the lid and the slider with warm, soapy water. Reattach the slider by aligning it with the grooves and sliding it back into place.

General Care:

• Do not use bleach or cleaners containing chlorine.
• Avoid using abrasive scrubbers on the exterior finish to prevent scratching.
• Ensure all parts are completely dry before storing to prevent odor or mildew.

5. Troubleshooting

Lid Not Sealing Properly:

Ensure the MagSlider Lid is correctly aligned and pressed firmly onto the cup. Check for any debris or residue on the lid's gasket or the cup's rim that might prevent a proper seal. Clean if necessary.

Beverage Not Staying Hot/Cold:

Verify that the MagSlider Lid is fully closed and securely seated on the cup. The double-wall vacuum insulation relies on a sealed environment to maintain temperature. Extreme external temperatures can also affect performance.

6. Product Specifications

Visual representation of the YETI Rambler cup's dimensions.

7. Warranty and Customer Support

For information regarding product warranty, returns, or customer support, please visit the official YETI website or contact YETI customer service directly. Keep your purchase receipt for warranty claims.

YETI Official Website: www.yeti.com