1. Introduction
The Onerbl AC-DC adapter is designed to provide reliable power to your compatible portable speaker. This adapter converts standard AC wall power into the DC power required by your device, enabling both operation and battery charging.
It is manufactured with quality materials and tested to ensure compatibility and performance.
2. Compatibility
This adapter is compatible with the following portable speaker models:
- Tronsmart Mirtune C2
- Tronsmart Mirtune H1
- Tronsmart ASD6AY Nimo Portable Speaker
Always verify your device's power requirements before connecting any adapter.
3. Features
- Input Voltage: AC 100-240V, 50/61Hz (Automatic worldwide input)
- Safety Protections: Over Voltage Protection, Over Heat Protection, Short Circuit Protection
- Reliability: Tested units ensuring great working condition.
4. Setup and Connection
- Inspect the Adapter: Before use, visually inspect the adapter and its cable for any signs of damage. Do not use if damaged.
- Connect to Speaker: Insert the adapter's DC output connector firmly into the power input port of your Tronsmart portable speaker. Ensure a snug fit.
- Connect to Power Outlet: Plug the AC input plug of the adapter into a standard wall electrical outlet (AC 100-240V).
- Power On: Your speaker should now receive power or begin charging. Refer to your speaker's manual for specific charging indicators.
Figure 1: Onerbl AC-DC Adapter. This image shows the adapter unit with its power input plug and the DC output barrel connector.
5. Operating Guidelines
- Use the adapter only with compatible devices as listed in this manual.
- Do not expose the adapter to water, moisture, or extreme temperatures.
- Avoid placing the adapter in poorly ventilated areas during operation to prevent overheating.
- Unplug the adapter from the wall outlet when not in use for extended periods.
6. Maintenance
- Cleaning: Disconnect the adapter from all power sources before cleaning. Use a soft, dry cloth to wipe the surface. Do not use liquid cleaners or sprays.
- Storage: Store the adapter in a cool, dry place away from direct sunlight and extreme temperatures. Avoid tightly winding the cable to prevent damage.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Speaker not powering on/charging. | Adapter not properly connected. Wall outlet not active. Speaker issue. |
Ensure both ends of the adapter are securely plugged in. Test the wall outlet with another device. Consult your speaker's manual or manufacturer. |
| Adapter feels excessively hot. | Poor ventilation. Overload. Internal fault. |
Ensure the adapter is in a well-ventilated area. Verify compatibility with your device. Discontinue use and replace the adapter if overheating persists. |
| Visible damage to adapter or cable. | Physical stress or accident. | Discontinue use immediately. Replace the adapter. |
8. Specifications
| Brand | Onerbl |
| Model Number (ASIN) | B0FD9YKBWP |
| Input Voltage | AC 100-240V, 50/61Hz |
| Color | Black |
| Special Features | Over Voltage Protection, Over Heat Protection, Short Circuit Protection |
| Power Source | Corded Electric |
| Manufacturer | Shenzhen Waweis Technology Co., Ltd |
9. Warranty and Support
For warranty information or technical support, please refer to the documentation provided with your purchase or contact the seller directly. Keep your purchase receipt for warranty claims.