Orixforce MC-109BK

Orixforce Mini Food Chopper 1.5 Cup Instruction Manual

Model: MC-109BK

Important Safety Instructions

When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons, including the following:

  • Read all instructions before operating the appliance.
  • To protect against electrical shock, do not immerse the motor base, cord, or plug in water or other liquids.
  • Close supervision is necessary when any appliance is used by or near children.
  • Unplug from outlet when not in use, before assembling or disassembling parts, and before cleaning.
  • Avoid contact with moving parts. Blades are sharp. Handle with care.
  • Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been dropped or damaged in any manner. Contact customer service for examination, repair, or adjustment.
  • The use of attachments not recommended or sold by the manufacturer may cause fire, electric shock, or injury.
  • Do not use outdoors.
  • Do not let cord hang over edge of table or counter, or touch hot surfaces.
  • Do not place on or near a hot gas or electric burner, or in a heated oven.
  • Do not use appliance for other than intended household use.
  • Do not attempt to defeat the lid interlock mechanism.
  • Ensure the lid is securely locked in place before operating the appliance.

Product Overview

The Orixforce Mini Food Chopper is designed for quick and efficient chopping of vegetables, herbs, and spices. It features a compact design and simple one-touch operation.

Components:

  1. Motor Base
  2. Chopping Bowl (1.5 Cup Capacity)
  3. Stainless Steel Blade Assembly
  4. Lid
Disassembled Orixforce Mini Food Chopper components

Image Description: This image displays all the disassembled components of the Orixforce Mini Food Chopper. From left to right, it shows the clear plastic chopping bowl, the stainless steel blade assembly with its central shaft, the clear plastic lid, and the black motor base with its power cord. This view helps users identify each part of the appliance.

Assembled Orixforce Mini Food Chopper

Image Description: This image shows the Orixforce Mini Food Chopper fully assembled. The black motor base is at the bottom, topped with the clear chopping bowl, and secured by the clear lid. The overall design is compact and ready for use.

Setup

Before first use, wash all parts except the motor base in warm, soapy water. Rinse thoroughly and dry. The motor base can be wiped clean with a damp cloth.

Assembly Steps:

  1. Place the motor base on a clean, dry, and stable surface.
  2. Carefully place the stainless steel blade assembly onto the center post inside the chopping bowl. Ensure it sits securely. Caution: Blades are sharp. Handle with extreme care.
  3. Add your ingredients to the chopping bowl. Do not overfill; ensure the lid can close properly.
  4. Place the lid onto the chopping bowl, aligning the tabs on the lid with the slots on the bowl. Twist the lid clockwise until it locks securely into place. The appliance will not operate unless the lid is properly locked.
  5. Place the assembled chopping bowl and lid onto the motor base, ensuring it is seated correctly.
Orixforce Mini Food Chopper with lid removed, showing blade assembly

Image Description: This top-down view shows the Orixforce Mini Food Chopper with its lid removed, revealing the clear chopping bowl and the stainless steel blade assembly positioned on the central shaft. This illustrates how the blade is placed inside the bowl before adding ingredients and securing the lid.

Operating Instructions

The Orixforce Mini Food Chopper features simple one-touch operation.

  1. Ensure the chopper is properly assembled with ingredients inside the bowl and the lid securely locked.
  2. Plug the power cord into a standard electrical outlet.
  3. Press and hold the "On" button located on the top of the motor base to begin chopping. The blades will rotate.
  4. Chop ingredients to your desired consistency. For coarse chopping, use short pulses. For finer chopping, hold the button down longer.
  5. Release the "On" button to stop the chopping action.
  6. Unplug the appliance from the outlet before disassembling or removing food.
  7. Carefully remove the lid, then the blade assembly, and finally the chopped ingredients.

Tips for Best Results:

  • Cut larger ingredients into 1-inch pieces before placing them in the chopper.
  • Do not overload the bowl. Process in smaller batches if necessary.
  • For best results with hard ingredients like nuts, use short pulses.
  • Avoid processing very hard items like coffee beans or ice cubes, as this may damage the blades or motor.
Top view of Orixforce Mini Food Chopper showing On/Off switch

Image Description: This image provides a top-down view of the assembled Orixforce Mini Food Chopper, highlighting the "On" and "Off" markings on the motor base. The clear lid is securely in place, indicating the appliance is ready for operation. This helps users locate the control switch.

Orixforce Mini Food Chopper in a kitchen setting with chopped vegetables

Image Description: The Orixforce Mini Food Chopper is shown on a kitchen counter, with small bowls of freshly chopped red and yellow bell peppers next to it. This image demonstrates the appliance's function in preparing ingredients for meals.

Maintenance and Cleaning

Proper cleaning and maintenance will ensure the longevity and optimal performance of your Orixforce Mini Food Chopper.

Cleaning Steps:

  1. Always unplug the chopper from the power outlet before cleaning.
  2. Disassemble the chopper: remove the lid, then the blade assembly, and finally the chopping bowl from the motor base.
  3. The chopping bowl, lid, and blade assembly are dishwasher safe (top rack recommended) or can be washed by hand in warm, soapy water. Rinse thoroughly and dry immediately. Caution: Blades are extremely sharp. Handle with care during cleaning.
  4. Wipe the motor base with a damp cloth. Do not immerse the motor base in water or any other liquid.
  5. Ensure all parts are completely dry before reassembling or storing.

Storage:

Store the assembled chopper in a dry place. For safety, it is recommended to store the blade assembly inside the chopping bowl with the lid secured.

Troubleshooting

ProblemPossible CauseSolution
Appliance does not turn on.
  • Not plugged in.
  • Lid not securely locked.
  • Motor base not properly seated.
  • Ensure the power cord is firmly plugged into a working outlet.
  • Twist the lid clockwise until it clicks into place.
  • Ensure the chopping bowl and lid assembly are correctly placed on the motor base.
Motor runs, but blades do not turn.
  • Blade assembly not properly installed.
  • Bowl overloaded.
  • Unplug, disassemble, and re-install the blade assembly ensuring it sits correctly on the center post.
  • Reduce the amount of food in the bowl. Process in smaller batches.
Food is unevenly chopped.
  • Ingredients are too large.
  • Bowl overloaded.
  • Cut ingredients into smaller, more uniform pieces before chopping.
  • Reduce the amount of food in the bowl.

Specifications

  • Brand: Orixforce
  • Model Number: MC-109BK
  • Power: 100 Watts
  • Bowl Capacity: 1.5 Cups
  • Blade Material: Stainless Steel
  • Product Dimensions: 5.47"D x 6.02"W x 8.15"H
  • Item Weight: 1.7 pounds
  • Color: Black
  • Dishwasher Safe Parts: Chopping bowl, lid, and blade assembly (motor base is not dishwasher safe)
  • UPC: 763482216290

Warranty and Customer Support

For warranty information or assistance with your Orixforce Mini Food Chopper, please contact Orixforce customer support. Keep your purchase receipt for warranty claims.

Contact details can typically be found on the product packaging or the official Orixforce website.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.