DATOUBOSS Integrated Home Energy Storage System

Introduction

The DATOUBOSS all-in-one integrated home energy storage system combines a 48V 6200W hybrid inverter and a 48V 300Ah lithium iron phosphate battery. This integrated design eliminates the need to purchase an inverter and battery separately, simplifying complex wiring and communication setups. The unit is equipped with mobile casters for easy relocation after unpacking, making it an ideal choice for large portable power stations.

This product offers a complete and unique solution for electricity generation, storage, and consumption, providing excellent value for money. Store energy during the day and consume electricity at night to potentially achieve zero electricity bills and harness solar power efficiently.

Safety Guidelines and Warnings

Please read, understand, and follow all instructions and applicable documentation before installing or using this product. Keep all manuals and documentation for future reference.

• Wear safety equipment and use appropriate tools.
• Installation must be performed by professionals.
• Ensure the installation complies with local and national electrical codes.
• Ensure the system is properly grounded.
• Ensure the battery is installed in a suitable position for electronic equipment.
• Keep the battery in a stable temperature range to ensure stable operation.
• Use appropriate cleaning agents (e.g., paper towel, dry cloth) to clean the battery. Do not use spray cleaners, liquids, or solvents to clean the battery. Do not paint the aerosol.
• Ensure all fasteners are correctly tightened.
• Do not incinerate, crush, or pierce the battery.
• Do not place the battery in a dangerous/flammable environment or where it may come into contact with chemicals or corrosive vapors.
• Do not store or install this product near a radiator, heat collector, stove, or boiler, or where it may be exposed to prolonged overheating.
• Do not immerse this product in liquid.
• Risk of electric shock, explosion, and fire. In case of electrical shock or overheating, disconnect the circuit breaker immediately and call the fire department.
• Keep away from damaged batteries and any liquid (electrolyte) or flammable gas escaping from the battery.
• In case of inhalation, evacuate to a well-ventilated area and consult a doctor.
• If battery fluid comes into contact with eyes or skin, rinse the affected area with running water for 15 minutes and consult a doctor.
• In case of fire, do not use water. Use only dry powder extinguishers. If possible, move the battery to a safe location before it catches fire.

Image: Important safety guidelines and warnings for the energy storage system.

Important Pre-Purchase Precautions: Due to the significant volume, high weight, specific transport channels, costly shipping fees, and high unit price of this product, we advise you to order with caution. We ask buyers to carefully consider their purchase before placing an order. Returns are not accepted for the following reasons: order error due to buyer's fault, sudden refusal of the package after shipment. Please ensure the product meets your needs before finalizing your purchase. This will prevent unnecessary losses and protect the interests of both parties.

Product Overview

The DATOUBOSS integrated energy storage machine is designed for ease of use and portability. It combines an inverter and battery into a single unit, simplifying setup and operation.

Image: Front view of the DATOUBOSS integrated energy storage system, highlighting its compact design and touchscreen display.

Image: Side view of the DATOUBOSS integrated energy storage system, showing the mobile casters for easy movement.

Integrated Design

This product integrates a hybrid inverter and a battery into a single unit. There is no need to purchase several separate devices or to proceed with complex connections and communications between the battery and the inverter. The all-in-one machine is simple to use and more practical.

Image: Diagram showing how the DATOUBOSS integrated machine combines an inverter, MPPT controller, and battery pack into one unit.

Components and Ports

The DATOUBOSS integrated energy storage system features a user-friendly interface with clearly labeled ports and indicators.

Image: Detailed view of the front and back panels, showing the touchscreen, indicators, and various connection ports.

Wiring Port Description

Image: Diagram detailing the wiring ports for PV input, AC input, and AC output.

• PV+: Photovoltaic positive terminal port
• PV-: Photovoltaic negative terminal port
• AC IN +: AC power direct charge positive terminal port
• AC IN -: AC power direct charge negative terminal port
• AC IN Ground: AC power direct charge ground wire connector
• AC OUT +: Inverter output positive terminal port
• AC OUT -: Inverter output negative terminal port
• AC Output Ground: Inverter output ground wire connection

Remark: Ensure that the installation complies with applicable local and national electrical codes.

Communication Interface

Image: Close-up of the RS232 and RS485 communication ports.

• RS-232 Interface: Can be connected to a corresponding WIFI module for wireless communication and monitoring of the all-in-one machine's data.
• RS-485 Interface: Can achieve communication with other batteries. It contains many fine wires, commonly called pins, which connect the battery pins and the integrated machine's communication accordingly. The RS485 pins of our integrated machine correspond to: 1 for 485B, 2 for 485A. Verify which are the two 485A and 485B battery pins. Simply connect the battery to 485A and 485B of the integrated device for successful communication.

Remark: The WIFI module can realize remote monitoring of the integrated machine's data, but does not support remote modification or remote control.

Specifications

The following table outlines the key technical specifications of the DATOUBOSS integrated energy storage system.

Image: Comprehensive table of product characteristics and specifications.

Installation Instructions

Please ensure the equipment is powered off before installation. It is recommended that the equipment be installed by a professional electrician.

Tools Required for Installation:

• Phillips screwdriver/torque wrench/appropriate size rivet gun.
• Connect the battery with appropriate cables/lugs.
• Correct cable: A cable that matches the battery's safety current.
• Correct lugs: Conforms to the dimensions of the battery block and safety current lug requirements.

Unpacking and Inspection:

Please inspect the equipment before installation. Ensure the packaging is intact. The package should contain the following items:

• Integrated home energy storage system
• User manual

WARNING: During product installation, the power must be disconnected and unplugged.

Image: Visual guide for product installation, including preparation and environmental considerations.

Mounting Considerations:

Before choosing a mounting location, consider the following elements:

• Use safety devices and insulated tools in accordance with local and national electrical codes applicable only by qualified personnel who have sufficiently understood and followed all instructions in the manual.

Placement and Environmental Applications:

• Do not install the product in harsh environments. The ambient temperature must be between 0°C and 55°C to ensure optimal operation.
• No chemical or flammable/corrosive vapor product.
• There are no heat sources such as radiators, sensors, or stoves nearby that could transfer heat to the battery or trap heat in the casing.
• There are no children or domestic animals nearby.
• Do not install the all-in-one machine on flammable materials. It is recommended to install vertically on a solid wall.
• Ensure you keep other objects and surfaces clear to allow sufficient space for heat dissipation and wiring.
• Install the All-in-One at eye level so that the LCD screen is always visible.
• Ensure it is correctly grounded, twisted, and wired.

Operation

The DATOUBOSS integrated system features a color touchscreen LCD for simple and clear operation. Its intuitive design allows you to view machine information at any time.

Home Screen Description

Image: Detailed description of the home screen interface and its various indicators.

• The time is displayed at the top of the screen.
• System setup icon: Press the setup button on the screen to access the system setup screen, which includes system work mode, grid setup, basic setup, charge settings, advanced functions, and equipment information.
• The main screen displays information such as PV, AC, charge, and battery. It also shows the direction of energy flow with arrows. When the battery is near its limit, the panel color changes from green to red, so that important system information is clearly displayed on the screen.
• PV power and charge power are always positive.
• The negative load sector is negative when it is connected and positive when it is collected.
• A negative value in the battery indicates a charge and a positive value indicates a discharge.
• Table of indicator light information.

Main Screen Status:

• No icon in the center: indicates that the system is functioning normally.
• Icons and characters are displayed in gray in the center: this indicates that the inverter has issued an alarm. Alarm information will be displayed in characters below the icon (for more details on the error message, please refer to the alarm menu).
• Icons and characters are displayed in red in the center: indicates that the inverter has a fault and fault information will be displayed in characters below the icon (for more details on the error message, please refer to the fault menu).

Touchscreen Display Flowchart

Image: Flowchart illustrating navigation through the touchscreen menus, from home screen to various settings.

System Settings Menu

Image: Overview of the system settings menu, showing options like Battery Setting, System Work Mode, Grid Setting, etc.

• Battery Setting: Configure battery type, charge voltage, float charge voltage, cut-off voltage, equalization parameters, etc.
• System Work Mode: Define ECO function, output priority (such as solar priority, battery priority), output type, etc.
• Grid Setting: Adjust input voltage range, grid connection mode, charge start and stop time, etc.
• Charge Setting: Select charge priority (solar first, solar and AC simultaneously), maximum charge current, etc.
• Advanced Function: Configure double voltage thresholds, discharge time, recovery delay, etc.
• Device Info: Define system time, screen brightness, RGB lighting switch, etc.

LCD Screen Details

Image: LCD screen displaying machine type, inverter type, and various temperature readings.

Image: LCD screen displaying solar input voltage, current, power, and energy generation over time.

Image: LCD screen displaying battery type, BMS communication status, voltage, and charge/discharge currents.

Image: LCD screen displaying BMS 485 protocol, State of Charge (SOC), charge/discharge currents, BMS temperature, and voltage limits.

Maintenance

To ensure optimal performance and longevity of your DATOUBOSS integrated energy storage system, regular maintenance is recommended. Keep the unit clean and free from dust and debris. Ensure proper ventilation around the unit to prevent overheating. Avoid exposing the unit to extreme temperatures or humidity. Periodically check all cable connections to ensure they are secure and free from damage. If any issues are observed, refer to the troubleshooting section or contact customer support.

Troubleshooting

The warning mode on the LCD screen helps you easily identify problems and resolve them quickly. If error or warning codes appear, the manual contains detailed solutions. If you are unable to resolve the problem yourself, you can also contact our professional technicians directly.

Refer to the specific error codes and their corresponding solutions provided in the comprehensive user manual (electronic versions available upon request) for detailed troubleshooting steps.

Warranty and Support

We guarantee the quality of our products and offer a 5-year warranty for this all-in-one device, as well as professional 24/7 customer service. For any questions regarding our products, please do not hesitate to contact us. We offer courteous and patient customer service.

Upon purchase, a paper user manual in English is included in the packaging. If you do not understand the English manual, please do not hesitate to contact us via the Amazon backend. We offer electronic manuals for different countries. If you need one, send us a message at any time and we will send it to you as soon as possible.

This product comes with a 30-day refund/replacement return policy.

Product Packaging Size and Material

Due to the significant weight and size of the product, to protect it from damage, the outer packaging is a crypted and hermetically sealed wooden box. When unpacking the outer box, be careful and pay attention to safety to avoid scratches!

Image: Diagram showing the dimensions of the product packaging.

Remarks on Goods Reception:

When you receive the integrated battery, please inspect it. If you notice any damage to the packaging or inside the battery, please take photos and videos immediately and contact us as soon as possible. Please keep the original box and packaging materials in case you need to repack or maintain the integrated battery in the future.

Image: Table detailing packaging components and materials, along with notes on receiving the product.